Reflected Posted March 14, 2019 Share Posted March 14, 2019 (edited) I asked my rio to tune to the frequency, and I hear the AWACS and the TAnker, but when I talk to them they don't reply. How come? Edited April 1, 2019 by IronMike Facebook Instagram YouTube Discord Link to comment Share on other sites More sharing options...
Hovis Posted March 14, 2019 Share Posted March 14, 2019 Just check you're talking on the right radio, most aircraft go uhf then vhf... tomcat flips it and goes uhf then vhf Link to comment Share on other sites More sharing options...
mr_mojo97 Posted March 14, 2019 Share Posted March 14, 2019 I’ve been having issues all day with radios. Going through Jester, I just don’t get a response, I also don’t get the FKeys menu staying on (stays on for a fraction of a second with either radio) although it works for all other aircraft only the f-14 and it’s driving me mental trying to figure it out. I’ve checked my bindings and all are fine without any duplicates. MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
104th_Maverick Posted March 14, 2019 Share Posted March 14, 2019 Ralt+radio button for radio 1 Rctrl+radio button for radio 2 [sIGPIC][/sIGPIC] 104th Phoenix Wing Commander / Total Poser / Elitist / Hero / Chad www.104thPhoenix.com www.facebook.com/104thPhoenix My YouTube Channel Link to comment Share on other sites More sharing options...
mr_mojo97 Posted March 14, 2019 Share Posted March 14, 2019 (edited) They’re both bound them to my Warthog already. As I say, the Fkey menu comes up then disappears straight away while using VA/ Vaicom. When I don’t have VA on, the OEM102 button does not show up the Fkey menu. This is only in the F-14. All other modules works correctly. Cheers Edited March 14, 2019 by mr_mojo97 MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
Reflected Posted March 14, 2019 Author Share Posted March 14, 2019 Yepp, wrong button, thanks! Facebook Instagram YouTube Discord Link to comment Share on other sites More sharing options...
Nealius Posted March 14, 2019 Share Posted March 14, 2019 I can't get them to work at all. Last night I had the radio tuned to 327 for Nellis tower, and I tried contacting both on Ralt and Rctrl radio button, but got zero response from the tower. Link to comment Share on other sites More sharing options...
mytai01 Posted March 14, 2019 Share Posted March 14, 2019 You can't use the normal Comm button. You have to select the actual radio mic type that you want to use. You can find it on the controls binding page... MS Win7 Pro x64, Intel i7-6700K 4.0Ghz, Corsair RAM 16Gb,EVGA GeForce GTX 1080 FTW GAMING ACX 3.0, w/ Adjustable RGB LED Graphics Card 08G-P4-6286-KR, Creative Labs SB X-FI Titanium Fatal1ty Champ PCIe Sound Card, Corsair Neutron XTI 1TB SSD, TM Warthog Throttle & Stick, TM TPR Pedels, Oculus Rift VR Headset CV1, Klipsch Promedia 4.1 Speakers... Link to comment Share on other sites More sharing options...
tribundf Posted March 15, 2019 Share Posted March 15, 2019 So, quick question. Excuse my ignorance. Can pilot only talk through the UHF radio? RIO can use CHF/UHF? Link to comment Share on other sites More sharing options...
Kayos Posted March 15, 2019 Share Posted March 15, 2019 I've used every button I can find for the mic's and no one responds. I can see Jester tuning the radio but get nothing. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Nealius Posted March 15, 2019 Share Posted March 15, 2019 You can't use the normal Comm button. You have to select the actual radio mic type that you want to use. You can find it on the controls binding page... I've tried all 3 comm buttons in existence in DCS... Link to comment Share on other sites More sharing options...
Silversmith Posted March 16, 2019 Share Posted March 16, 2019 Radios not working for me either. Tried everything, checked bindings, checked special options. I can issue a comms command on the appropriate radio tuned to the correct channel, and can hear my pilot's voice speak over the radio and see the text corresponding to that on the screen, but I never get any response. e.g. If I issue a Flight formation change I can see and hear the command being issued, but get no response, and my wingmen do not change formation. Happens the same for ALL communications calls. Its as if I'm talking to myself. No problems in any other DCS module. Link to comment Share on other sites More sharing options...
kreisch Posted March 16, 2019 Share Posted March 16, 2019 I have the same issue, in SP everything is fine but in MP I cannot contact any radio - only as a RIO. If I play pilot everything works fine :/ Gesendet von meinem F5121 mit Tapatalk Ugly-Squadron GamestarPinboard Link to comment Share on other sites More sharing options...
Silversmith Posted March 16, 2019 Share Posted March 16, 2019 I uninstalled and then reinstalled the F14B. Now the radio problem has gone away for me. Must have been a bad install the first time. Link to comment Share on other sites More sharing options...
kreisch Posted March 16, 2019 Share Posted March 16, 2019 @silversmith You sir, you are my hero of the day! I did a Cleanup and a repair, didn't fix it. Reinstall did, I can finally use the radios as a RIO! Gesendet von meinem F5121 mit Tapatalk Ugly-Squadron GamestarPinboard Link to comment Share on other sites More sharing options...
Random Posted March 16, 2019 Share Posted March 16, 2019 Been having this problem too. Will try a reinstall of the module tomorrow! Link to comment Share on other sites More sharing options...
mr_mojo97 Posted March 16, 2019 Share Posted March 16, 2019 Ok, interesting, I too will try this tomorrow MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
clanitho Posted March 17, 2019 Share Posted March 17, 2019 I uninstalled and then reinstalled the F14B. Now the radio problem has gone away for me. Must have been a bad install the first time. Hello, How did you uninstall and reinstall? MSI Z97 Gaming 5 - Intel I7 4790K - Artic cooling freezer 7 pro rev 2 - GSKILL 32 Go - SSD Crucial M5 120 go - SSD Crucial 2To - HDD western digital caviar blue 1 TO - Gigabyte GTX 1070 Gaming G1 - Windows 10 home 64 bits Link to comment Share on other sites More sharing options...
kreisch Posted March 17, 2019 Share Posted March 17, 2019 Hello, How did you uninstall and reinstall?Use the Modul manager of dcs Gesendet von meinem F5121 mit Tapatalk Ugly-Squadron GamestarPinboard Link to comment Share on other sites More sharing options...
Mnemonic Posted April 18, 2019 Share Posted April 18, 2019 (edited) I re-installed module and still can't use the radio. Basically if I start the mission when aircraft is already started - radios work, I can select correct radio and talk. When I do the cold startup - radio simply doesn't work, nobody replies. Correction - ATC doesn't reply. Edited April 18, 2019 by Mnemonic Link to comment Share on other sites More sharing options...
Wrightie Posted April 22, 2019 Share Posted April 22, 2019 Since launch I was also unable to use the radios to talk to ATC, AWACS, Ground Crew. I had the communication Menu mapped to a button on my HOTAS (as i had it set up for my other modules). It just didn't work. Today I remapped my the button on my HOTAS to the ARC-182 Mic button and loe and behold... it worked. I'm now able to communicate with other aircraft, ATC etc while piloting the Tomcat (haven't tried as RIO yet). This has been doing my nut for ages so worth a try if anyone else is still struggling with this. Link to comment Share on other sites More sharing options...
Shimmergloom667 Posted April 23, 2019 Share Posted April 23, 2019 You guys got Jester tuned on AM or FM? i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H Link to comment Share on other sites More sharing options...
FRECCIA02 Posted January 5, 2020 Share Posted January 5, 2020 Hello everyone, I have encountered the same problem, we are unable to communicate in MP than in SP, I did the installation of the module and the repair on DCS, subsequently reinstalled the F14 module but the problem persists. Solutions? Thanks Link to comment Share on other sites More sharing options...
FRECCIA02 Posted January 5, 2020 Share Posted January 5, 2020 Fixed, incorrect SRS radio configuration, THANKS Link to comment Share on other sites More sharing options...
RedeyeStorm Posted January 6, 2020 Share Posted January 6, 2020 Jester keeps the radio on FM. Check in the rear if the radio is tuned to AM. Link to comment Share on other sites More sharing options...
Recommended Posts