Oubaas Posted October 25, 2017 Share Posted October 25, 2017 When I fly the Viggen out of Nellis in DCS World 2 Open Alpha 2.1.1.9459 in daylight hours, the environmental light outside the cockpit keeps shifting from extremely bright to normal and back again. This is not the aircraft lights, it's the entire environment, sky and all, frequently shifting level of brightness. It's very disconcerting when flying. I used the forum search function before posting and couldn't find any reports of similar phenomenon. None of my other aircraft do this, and I have every other aircraft except the Hawk, the Aviojet, the BF-109, and the FW190. There is not problem in the 1.5 beta version, just the version 2 open alpha. If anyone could suggest a remedy it would be much appreciated. If it's something that needs to be fixed in a future update to the aircraft, then I guess patience is the answer. Aside from that, love the Viggen. Thanks! Link to comment Share on other sites More sharing options...
unknown Posted December 12, 2017 Share Posted December 12, 2017 I tried the Viggen today after a long break from it. I noticed that if i use the Viggen in DCS 2.2 and activate the Radar the whole monitor is flickering black if i use the green skin of the Viggen and white if i use the silver skin. The flickering ends as soon as i turn the Radar off and starts as soon as i turn the Radar on again. I think it is the same problem as stated by Oubaas. Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
unknown Posted December 13, 2017 Share Posted December 13, 2017 Here is a little video showing the flickering, hopefully it helps to solve the problem. You can see the flickering after i activate the radar between 0:18 to 0:47 and 1:04 to 1:15. this flickering is only present in the Viggen after the radar is switched active, sometimes it's worse and sometimes it's a little better. Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
Cobra847 Posted December 13, 2017 Share Posted December 13, 2017 This is a very odd issue. Perhaps something to do with the tonemapper? Will try to investigate. Nicholas Dackard Founder & Lead Artist Heatblur Simulations https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
unknown Posted December 13, 2017 Share Posted December 13, 2017 This is a very odd issue. Perhaps something to do with the tonemapper? Will try to investigate. Thank you for looking into it, attached is a screenshot of my in game settings. If you need more info(msconfig or dcs logs?) just let me know. This flickering is only in DCS 2.x present and with enabled Deferred Shading. In 1.5.8 and in 2.2 with Deferred Shading OFF this flickering does not appear. Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
Len62 Posted December 13, 2017 Share Posted December 13, 2017 I have the same issue flying the Gazelle in 2.2 NTTR. Link to comment Share on other sites More sharing options...
paeagle Posted December 13, 2017 Share Posted December 13, 2017 I have exactly the same problem as unknown writes, when I fly the Viggen in DCS 2.x. Sometimes I also see what Oubaas describes in the first post in this thread. PC spec.: i7-6700, 16GB RAM, SSD 480GB, ASUS STRIX R9 390X 8GB, Win 7 Professional, Radeon Crimson 17.11.1 Link to comment Share on other sites More sharing options...
Knock-Knock Posted December 13, 2017 Share Posted December 13, 2017 Maybe to early to call, but I see AMD gfx where it happens? - Jack of many DCS modules, master of none. - Personal wishlist: F-15A, F-4S Phantom II, JAS 39A Gripen, SAAB 35 Draken, F-104 Starfighter, Panavia Tornado IDS. | Windows 11 | i5-12400 | 64Gb DDR4 | RTX 3080 | 2x M.2 | 27" 1440p | Rift CV1 | Thrustmaster Warthog HOTAS | MFG Crosswind pedals | Link to comment Share on other sites More sharing options...
Nobody96 Posted January 9, 2018 Share Posted January 9, 2018 I have the same issue. I am also an AMD user. My System: Intel Core i7-4770K, Asus ROG Strix RX480 O8G, 24GB Ram Link to comment Share on other sites More sharing options...
Nobody96 Posted January 9, 2018 Share Posted January 9, 2018 Turning off Deferred Shading and turning on HDR did the trick. My System: Intel Core i7-4770K, Asus ROG Strix RX480 O8G, 24GB Ram Link to comment Share on other sites More sharing options...
Xordus Posted January 16, 2018 Share Posted January 16, 2018 (edited) That's not really a fix... I'm having the same issue. Happens only when the radar is on but its pretty damn annoying. Also using AMD How has this problem not been fixed for 3 months?? Edited January 16, 2018 by Xordus Link to comment Share on other sites More sharing options...
Xordus Posted January 21, 2018 Share Posted January 21, 2018 It would be really nice if this problem would be addressed... I understand waiting till 2.5 but this problem has been around for a long time and it makes the Jet unplayable unless you turn off Deferred Shading. THAT'S NOT OKAY. Of course It's not like I can even join a server to use the aircraft anyway. 3 out of 4 tries I drop from the Server when trying to even sit in your plane... I love this module when it works but it is all kinds of screwed up atm. I really hope this isn't what we can expect from the F-14. Link to comment Share on other sites More sharing options...
unknown Posted February 1, 2018 Share Posted February 1, 2018 Bump I had only little time for testing, will do at the weekend, but it looks like this problem is solved for me in 2.5 open beta! :thumbup::thumbup::thumbup: Thank you Heatblur and ED! :joystick::D Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
Cobra847 Posted February 2, 2018 Share Posted February 2, 2018 That's not really a fix... I'm having the same issue. Happens only when the radar is on but its pretty damn annoying. Also using AMD How has this problem not been fixed for 3 months?? It would be really nice if this problem would be addressed... I understand waiting till 2.5 but this problem has been around for a long time and it makes the Jet unplayable unless you turn off Deferred Shading. THAT'S NOT OKAY. Of course It's not like I can even join a server to use the aircraft anyway. 3 out of 4 tries I drop from the Server when trying to even sit in your plane... I love this module when it works but it is all kinds of screwed up atm. I really hope this isn't what we can expect from the F-14. The answer is that it's not a Heatblur problem, thus we cannot fix it. Nicholas Dackard Founder & Lead Artist Heatblur Simulations https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
Recommended Posts