Chippie Posted April 11, 2014 Share Posted April 11, 2014 Hi lads, can anyone please help with trying to get the Huey sling camera, ,placed in the top left quarter of my second monitor, which is on the RH side of main monitor. I only have two monitors at 1600 x 900 x 2 monitors. Any help would be much appreciared Cheers AEF Chippie | 161 SQN Link to comment Share on other sites More sharing options...
hitman Posted April 12, 2014 Share Posted April 12, 2014 Although its a good question, I would recommend keeping the camera in your field of vision. Ive tried keeping the camera on a separate monitor, but watching the camera on one monitor while trying to maintain a stable hover is next to impossible. I would keep it where its at... 1 Link to comment Share on other sites More sharing options...
hreich Posted April 12, 2014 Share Posted April 12, 2014 Can't get cargo camera to show How to reposition camera window? I can' get the cargo camera to show (i checked and keys are lshift+lctrl+c) at all [sIGPIC][/sIGPIC] Pilot from Croatia Link to comment Share on other sites More sharing options...
Chippie Posted April 12, 2014 Author Share Posted April 12, 2014 Thank you , I didn't even think of going back to single screen. Cheers Just need to assign External Cargo hook/un hook or automatic hook/unhook and land very close to cargo. Link to comment Share on other sites More sharing options...
KirkaFordis Rex Posted May 3, 2014 Share Posted May 3, 2014 (edited) Hi lads, can anyone please help with trying to get the Huey sling camera, moved Was there an answer to this? Mines in the upper right corner of my right monitor which is located over the right door window. I'd like to move it more into my field of view. running 3 monitors, 6040*1080 edit: I'm currently digging around in DCS World\Mods\aircrafts\Uh-1H\Cockpit\Scripts\CARGO_CAM_base_page.lua Edited May 3, 2014 by KirkaFordis Rex i7-6700K, Gigabyte GTX1080 8GB , MSI Z170A, 32GB, 750W VFA-113 Link to comment Share on other sites More sharing options...
Need-To-Know Posted May 3, 2014 Share Posted May 3, 2014 Was there an answer to this? Mines in the upper right corner of my right monitor which is located over the right door window. I'd like to move it more into my field of view. running 3 monitors, 6040*1080 edit: I'm currently digging around in DCS World\Mods\aircrafts\Uh-1H\Cockpit\Scripts\CARGO_CAM_base_page.lua I too would like to do this as I have a similar setup. Fight to fly, fly to fight, fight to win. Callsign: Need Shu-Ha-Ri Link to comment Share on other sites More sharing options...
KirkaFordis Rex Posted May 3, 2014 Share Posted May 3, 2014 in DCS World\Mods\aircrafts\Uh-1H\Cockpit\Scripts\CARGO_CAM_base_page.lua line # 11 HUD_OnlyVerts = {{-width,height},{width,height},{width,-height},{-width,-height}} the "width" value is it's position on the screen. By defualt line #7 local width = 1.0. swapping out the word "width" with "1" will yield the same position. The lower this number is, the farther from the right hand side of the screen. Also we can see that the box defaults from -1 to 1 so it is 2 units wide. My resolution is 6060*1080 and this is what I changed my line #11 to: HUD_OnlyVerts = {{-10,height},{-8,height},{-8,-height},{-10,-height}} You can tweak the numbers to get it just right. I'm sure there are probably other (better) ways to do it, but this worked for me. Hope it helps. 2 i7-6700K, Gigabyte GTX1080 8GB , MSI Z170A, 32GB, 750W VFA-113 Link to comment Share on other sites More sharing options...
chenhehe Posted June 25, 2014 Share Posted June 25, 2014 Hello A good question. Link to comment Share on other sites More sharing options...
WildBillKelsoe Posted June 26, 2014 Share Posted June 26, 2014 PM PeterP AWAITING ED NEW DAMAGE MODEL IMPLEMENTATION FOR WW2 BIRDS Fat T is above, thin T is below. Long T is faster, Short T is slower. Open triangle is AWACS, closed triangle is your own sensors. Double dash is friendly, Single dash is enemy. Circle is friendly. Strobe is jammer. Strobe to dash is under 35 km. HDD is 7 times range key. Radar to 160 km, IRST to 10 km. Stay low, but never slow. Link to comment Share on other sites More sharing options...
CHSubZero Posted June 29, 2014 Share Posted June 29, 2014 PM PeterP It is not possible to PM PeterP. He disabled it :music_whistling: My Mods: DCS User Files Modules owned: EVERY Module :pilotfly: Link to comment Share on other sites More sharing options...
HellsBells Posted January 9, 2015 Share Posted January 9, 2015 (edited) Try this works for me File: CARGO_CAM_init.lua Under the line: dedicated_viewport_arcade = dedicated_viewport add the line try_find_assigned_viewport("UH_1H_cargocam") or any name you like save: Now edit your Monitorsetup\huey.lua for example add the following UH_1H_cargocam = { x = 6251; y = 319; width = 920; height = 737; select your own x,y,w,h mine shows on the right MFCD Added JSGME fileHUEY CARGO_CAM_JSGME.ZIP Edited January 9, 2015 by HellsBells added JSGME change | i9 9900K Octa Core 2TB SSD +32GB Spectrix DDR4 @3200MHz RGB | 2 x Radeon RX480 in Crossfire. | TrackIR5 HOTAS Warthog,MFG Crosswind Pedals | Cougar MFDs | [OCG] Oceanic Combat Group discord.gg/ZmXEBSU "Through The Inferno" by deadlyfishes Official Australian Servers SRS: All Servers have Auto-Connect Enabled Server 1: TTI Caucasus Server 2: TTI Persian Gulf Server 3: OCG Training Server 4: OCG NTTR & Multiplayer Missions Australian Website AU Discord Server Link to comment Share on other sites More sharing options...
hreich Posted January 11, 2015 Share Posted January 11, 2015 I tried using config from hellsbells but i dont have cargo cam showing at all..do i need to position myself properly over cargo to get camera to show on my screen? [sIGPIC][/sIGPIC] Pilot from Croatia Link to comment Share on other sites More sharing options...
HellsBells Posted January 11, 2015 Share Posted January 11, 2015 (edited) I found if you are higher than 1200-1500 it does not work. Plus you must be off the ground I presume you changed the x,y etc settings to suit. I also set a key to activate the Cam ***************************************** As I run Eyefinity I changed the location of the Cargo Cam to the Top Right of the first monitor for a second monitor try 2750,25,424,537 ***************************************** _ = function(p) return p; end; name = _('HUEY MASTER'); Description = 'HUEY MASTER' Viewports = { Center = { x = 0; y = 0; width = 4808; height = 1200; viewDx = 0; viewDy = 0; aspect = 4.00666666666667; } } UH_1H_cargocam = { x = 1126; y = 18; width = 424; height = 537; } UIMainView = Viewports.Center ********************************* The only bug I found is a small duplicate screen appears when activated on my center monitor Edited January 12, 2015 by HellsBells additional info | i9 9900K Octa Core 2TB SSD +32GB Spectrix DDR4 @3200MHz RGB | 2 x Radeon RX480 in Crossfire. | TrackIR5 HOTAS Warthog,MFG Crosswind Pedals | Cougar MFDs | [OCG] Oceanic Combat Group discord.gg/ZmXEBSU "Through The Inferno" by deadlyfishes Official Australian Servers SRS: All Servers have Auto-Connect Enabled Server 1: TTI Caucasus Server 2: TTI Persian Gulf Server 3: OCG Training Server 4: OCG NTTR & Multiplayer Missions Australian Website AU Discord Server Link to comment Share on other sites More sharing options...
LNR212 Posted May 1, 2015 Share Posted May 1, 2015 The only bug I found is a small duplicate screen appears when activated on my center monitor ...same as for me. is there any fix to just have one (my assigned viewport) on screen? or at least to minimize the other one to zero? Link to comment Share on other sites More sharing options...
Neo47 Posted April 14, 2016 Share Posted April 14, 2016 ... The only bug I found is a small duplicate screen appears when activated on my center monitor Got/have the same promblem in 1.5.x. Is there any solution known?! Thx Regards / Grüße Neo -- Core i7 2600 @4,5 GHz | ASRock P67 Professional | 16 GB RAM | GeForce RTX 2070 | SB X-Fi | 250 GB SSD + 1 GB SSD + 2 TB HD | WIN 10 Pro | TM Warthog | VPC WarBRD base | VPC MongoosT-50CM2 Grip | WINWING F/A-18 H.O.T.A.S | MFG Crosswind | TIR5 | HELIOS -- Link to comment Share on other sites More sharing options...
Neo47 Posted April 15, 2016 Share Posted April 15, 2016 Problem fixed... Changed in the CARGO_CAM_init.lua the dedicated_viewport entry. Easy if u know it... :music_whistling: dofile(LockOn_Options.common_script_path.."devices_defs.lua") dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") indicator_type = indicator_types.COMMON if LockOn_Options.flight.easy_radar then render_target_always = true purposes = {render_purpose.HUD_ONLY_VIEW,render_purpose.SCREENSPACE_INSIDE_COCKPIT,render_purpose.SCREENSPACE_OUTSIDE_COCKPIT} else purposes = {render_purpose.HUD_ONLY_VIEW,render_purpose.SCREENSPACE_INSIDE_COCKPIT} end dedicated_viewport = {1450,1137,415,415} dedicated_viewport_arcade = dedicated_viewport -------PAGE IDs------- id_Page = { PAGE_NULL = 0, PAGE_OFF = 1, PAGE_MAIN = 2 } id_pagesubset = { COMMON = 0, } page_subsets = {} page_subsets[id_pagesubset.COMMON] = LockOn_Options.script_path.."CARGO_CAM\\CARGO_CAM_base_page.lua" ---------------------- pages = {} pages[id_Page.PAGE_MAIN] = { id_pagesubset.COMMON} init_pageID = id_Page.PAGE_MAIN always_show_ground = false --use_parser = false 1 Regards / Grüße Neo -- Core i7 2600 @4,5 GHz | ASRock P67 Professional | 16 GB RAM | GeForce RTX 2070 | SB X-Fi | 250 GB SSD + 1 GB SSD + 2 TB HD | WIN 10 Pro | TM Warthog | VPC WarBRD base | VPC MongoosT-50CM2 Grip | WINWING F/A-18 H.O.T.A.S | MFG Crosswind | TIR5 | HELIOS -- Link to comment Share on other sites More sharing options...
LNR212 Posted April 18, 2016 Share Posted April 18, 2016 Problem fixed... Changed in the CARGO_CAM_init.lua the dedicated_viewport entry. Easy if u know it... :music_whistling: Thanks Neo, working great! :thumbup: Link to comment Share on other sites More sharing options...
BR CEROL Posted September 15, 2019 Share Posted September 15, 2019 Thanks Neo, working great! :thumbup: I can't solve this problem here..... i think , some update, was modify this way to configure ! Link to comment Share on other sites More sharing options...
Recommended Posts