DCS World - SU25T Keyboard command list

Hi,

Has anyone put together a list of keyboard commands for the SU25T in DCS World?

Thanks,

Gary

Posted this a while ago somewhere else, hope it helps.

Additionally, when carrying the MPS-410 Jammer pods (need both)

you can use E to activate the jammers. (warm up time 15 secs i believe, once warmed up flashing green light in the RH console wall will burn steady)

Needed for Start Up;

RSHIFT+L = Start APU (put electrical power on, whatever)

L = cockpit instrument lights (for when its dark obviously)

Ctrl + C = close/open canopy

Right Alt + Home = Start ENG #1

Right Ctrl + Home = Start ENG #2

Right Alt + L = taxi/landing lights (take's a while to move down from stowed position under the wingtip speed brakes

W = Wheel Brake

Right Ctrl + L = Navigation lights (steady, alternating Left/Right, off)

 

Needed for Take-off;

1 = select navigation mode

F = Flaps (cycles between fully retracted and down one "notch" is for take-off)

G = Landing Gear (retract/extent)

Ctrl + ` = cycle waypoints, or cycle airfields when in Return/ILS mode nav mode

 

Needed for Flying

Assign your axis!!!

` = AP override (is the key left of the 1 on your keyboard)

Alt + 1 = AP Attitude Hold (maintains bank and pitch angle)

Alt + 2 = AP Altitude and Roll Hold (maintains altitude and bank angle)

Alt + 3 = AP Transit Level Flight (panic button, returns aircraft to straight and level flight)

 

Alt + 4 = AP Barometric Altitude Hold (can still roll the aircraft)

Alt + 5 = AP Radio Altitude hold (can still roll the aircraft, follows terrain, Alt THERE ARE SLOPE LIMITS believe max 5 degrees up)

 

Alt + 9 = AP Disengage (disengage whatever autopilot mode was selected)

 

A = Auto Pilot on in selected NAV mode (meaning fly's to next waypoint, fly's to return point, fly's ILS approach, or when in Air to Ground mode and any targeting device lock it will fly to the locked target at the present altitude)

 

Rctrl + . = Trim UP

Rctrl + / = Trim Right Roll (right wingtip down)

Rctrl + ; = Trimp Down

Rctrl + , = Trim Left Roll (left wingtip down)

 

Needed for Air to Ground

7 = select Air to ground mode

Shift + E = activate rear hemisphere IR jammer (should help against heat seaking missiles, don't expect magic though)

 

Space = Launch/fire selected weapon (gun/rockets/bombs/missiles)

Ctrl + V = Salvo Mode (launches selected weapon in salvo, for example 4 rocket pods at same time)

D = Cycle weapon stations

Right Ctrl + O = Mercury LLTV (low light version of Skhval, only if fitted)

C = Select Canon

i = Select Fantasmagoria (needed to lock and launch KH-25MPU and KH-58 Anti Radiation Missiles)

 

Insert = deploy chaff (only good against radar guided missiles)

Delete = deploy flares (only good against Heat Seaking missiles)

for both, DONT EXPECT MAGIC!

 

O = Uncage/Cage skhval

; = Skhval UP

/ = Skhval Right

. = Skhval Down

, = Skhval Left

(these also work for the ELINT and LLTV target designators)

 

Ctrl + W = Jettison Weapons (start whit A-G weapons, outter pylons first working inwards, then continues whit A-A weapons outter pylons first working inwards, pods/jammers can NOT BE JETTISONED)

 

Enter = Lock Target

Alt + R = Jettison External tanks (also in pairs, outboard stations first then inboard)

 

V = cycle ripple interval

Ctrl + Space = Ripple quantity

 

 

 

That's just about it i guess, you can download my profile here;

http://forums.eagle.ru/attachment.php?attachmentid=37779&d=1270665727

(both for SU33 and SU25T profile is bit dated so some things may not work anymore)

 

~S~

 

 

***EDIT***

Forgot the following

In options, controls, axis assignments look for I 251 zoom this is zoom of the Skhval and can be bound to a rotary/slider or other axis

Also look for "target box size, gun funnel size, gunpod elevation" this can also be bound to an axis.

Thank You ... Gary

http://www.geocities.ws/jzoomiethomas/UTS_Su25T.htm

This is the guide that I use when flying.

Simply hit F3 on your browser to search what you're looking for.

Make sure you have full screen off so if you want to alt-tab when flying, the program doesn't crash.

Many Thanks!

Gary

Please note that it was written up for LO-MAC 1.10 though.

Still, seems like a good place to start off.

I'd like to add the LCTRL + F for full flaps. They are separate functions.

EDIT: Sorry I didn't check the last post date. Didn't mean to dig up ancient threads.