MFD's on 2nd screen

Do you have to use 2 monitors to use this setup?

And what is needed use this add-on?

Strange. I have the export working fine for my A-10C. When I fly the Eagle and I hit Right Ctrl+Ent. The right MFD gives me the joy axis graph, but I don't get the radar screen on the left MFD. How did I herp the derp?

any new how to export the rwr/beryoza of f15 and sukhoi to the 2nd display on FC3? thx

A10C MFCDE on the IPAD

This thread has gotten so huge, can any one tell me the easiest way to get the a10c MFCD on my ipad without having to read trough all of these posts? I did try but after reading a few I get turned around and confused. Anyone want to post something simple that a commoner can understand?

This thread has gotten so huge, can any one tell me the easiest way to get the a10c MFCD on my ipad without having to read trough all of these posts? I did try but after reading a few I get turned around and confused. Anyone want to post something simple that a commoner can understand?

iControl DCS Works like a charm

here is my "one to rule them all file"

how ever i am not using the SU-25 and i have not bin busy with anything on the FC3 side apart from flying them

 

 

maybe others can use it see wat they can make out of it

 

 

_ = function(p) return p; end;

name = _('Export example');

Description = 'Export example';

Viewports =

-- Put your values in , and delete all exports that you don't want to use !

--[[

List of Exports:

 

----------------------

Eagle Dynamics A-10C =

----------------------

 

MFCD_init.lua

ED_A10C_LEFT_MFCD

ED_A10C_RIGHT_MFCD

 

CDU_init.lua

ED_A10C_CDU

 

DIGIT_CLK_init.lua

ED_A10C_CLOCK

 

AN_ALR69V_init.lua

ED_A10C_RWR

 

CMSP_init.lua

ED_A10C_CMSP

 

CMSC_init.lua

ED_A10C_CMSC

 

freq_status_init.lua

ED_A10C_UHF_FREQUENCY_STATUS

 

preset_channel_init.lua

ED_A10C_UHF_PRESET_CHANNEL

 

repeater_init.lua

ED_A10C_UHF_REPEATER

 

 

----------------------

Eagle Dynamics Ka-50 =

----------------------

 

ABRIS_init.lua

ED_KA50_ABRIS

 

SHKVAL_init.lua

ED_KA50_Shkval

 

UV_26_init.lua

ED_KA50_UV26

 

PVI_init.lua

ED_KA50_PVI

 

Ekran_init.lua

ED_KA50_Ekran

 

CautionLights_panel.lua

ED_KA50_CautionLights

--]]

 

 

{

Center =

{

x = 0;

y = 0;

width = 1920;

height = 1080;

viewDx = 0;

viewDy = 0;

aspect = 1.25;

}

}

 

GUI=

{

x = 0;

y = 0;

width = 800;

height = 600;

}

 

UIMainView = Viewports.Center

 

--//////////////////////////////////////

-- Eagle Dynamics A-10C =

--//////////////////////////////////////

 

ED_A10C_LEFT_MFCD =

{

x = 1963;

y = 80;

width = 299;

height = 296;

}

 

ED_A10C_RIGHT_MFCD =

{

x = 2856;

y = 79;

width = 299;

height = 296;

}

 

ED_A10C_CDU =

{

x = 2241;

y = 718;

width = 652;

height = 305;

}

 

ED_A10C_CLOCK =

{

x = 2240;

y = 550;

width = 75;

height = 85;

}

 

ED_A10C_RWR =

{

x = 2311;

y = 101;

width = 130;

height = 130;

}

 

ED_A10C_CMSP =

{

x = 2635;

y = 129;

width = 179;

height = 41;

}

 

ED_A10C_CMSC =

{

x = 2496;

y = 94;

width = 140;

height = 33;

}

 

ED_A10C_UHF_FREQUENCY_STATUS =

{

x = 2342;

y = 375;

width = 78;

height = 18;

}

 

ED_A10C_UHF_PRESET_CHANNEL =

{

x = 2418;

y = 320;

width = 17;

height = 17;

}

 

ED_A10C_UHF_REPEATER =

{

x = 2365;

y = 460;

width = 60;

height = 25;

}

 

 

--//////////////////////////////////////

-- Eagle Dynamics Ka-50 =

--//////////////////////////////////////

 

ED_KA50_ABRIS =

{

x = 2797;

y = 560;

width = 246;

height = 340;

}

 

ED_KA50_Shkval =

{

x = 2400;

y = 300;

width = 365;

height = 295;

}

 

ED_KA50_UV26 =

{

x = 3050;

y = 10;

width = 100;

height = 50;

}

 

ED_KA50_PVI =

{

x = 2100;

y = 300;

width = 100;

height = 100;

}

 

ED_KA50_Ekran =

{

x = 2835;

y = 370;

width = 100;

height = 70;

}

 

ED_KA50_CautionLights =

{

x = 2100;

y = 0;

width = 900;

height = 1800;

}

Hi,

I'm trying to setup multi-monitors in A10C.... I can get MFCDs working fine but just cannot get CDU etc to show up on 2nd screen. Do I have to edit anything other than the .lua file in the monitor config folder to get this to work?

Cheers in advance.

it seems like no one has been able to export MFD in f15 like a10. will the developers ever update fc3 to support it?

I am using ultraMFCD, really easy to set up and works great

I'm a DCS newjack looking for a 2 monitor LUA file setup for my primary 1920x1080 as center, and secondary 1600x900 as a Left and Right MFCD split screen for the A-10C. I've tried MFCD option and several ED LUA's. The result: the center and MFCD's are merged between the two screens. N.B.: Full screen and Aero screen are off. Pleeeease Help.

My rig: ASUS X79-Deluxe MoBo, Intel I-7, Intel 240GB SSd, 2(x) 2TB SATA, 16GB DDRAM, NVIDIA GTX 970 & 750Ti, Dell 1920x1080 & Acer 1600x900 monitors,WIN 7, ThrustMaster Warthog HOTAS, Cougar HOTAS & Cougar MFCD's, Hoffman Simped-Vario F-16 Rudder Pedals, and Track IR-5.

Hi guys,

I had no problem to set up my MFCDs but I can't make the other stuff work (RWR, CDU, CMSP). Running 1.2.16 on 1680x2100, windowed mode or not (MFCDs work both ways). Camera on Top monitor and exports in the bottom one.

What am I doing wrong? My .lua is below

Many thanks for your help

What am I doing wrong? My .lua is below

You need to edit the indicator's Lua files to make RWR_SCREEN etc. available as view names.

See this link on how to do that.

Thank you very much. It worked!!

Now that we're here, and not wanting to hijack the thread, Notepad++ doesn't want to save unless I remove the .lua files from their folders. I think it is because they're nested under Program Files folder. Any ideas?

Start it as administrator, or copy it to somewhere else and then using Explorer, just write over it.

hsb

Im trying to get my F-15C radar to display on my 2nd monitor.

I've spent hours playing with the LUA files with no success..

When I hit RCTRL+ENTR all I get is my axis plot.

This is the data I've tried using

------------------------------------------------------------------------------

_ = function(p) return p; end;

name = _('Export example');

Description = 'Export example';

Viewports =

-- Put your values in , and delete all exports that you don't want to use !

--[[

List of Exports:

----------------------

Eagle Dynamics A-10C =

----------------------

MFCD_init.lua

ED_A10C_LEFT_MFCD

ED_A10C_RIGHT_MFCD

CDU_init.lua

ED_A10C_CDU

DIGIT_CLK_init.lua

ED_A10C_CLOCK

AN_ALR69V_init.lua

ED_A10C_RWR

CMSP_init.lua

ED_A10C_CMSP

CMSC_init.lua

ED_A10C_CMSC

freq_status_init.lua

ED_A10C_UHF_FREQUENCY_STATUS

preset_channel_init.lua

ED_A10C_UHF_PRESET_CHANNEL

repeater_init.lua

ED_A10C_UHF_REPEATER

----------------------

Eagle Dynamics Ka-50 =

----------------------

ABRIS_init.lua

ED_KA50_ABRIS

SHKVAL_init.lua

ED_KA50_Shkval

UV_26_init.lua

ED_KA50_UV26

PVI_init.lua

ED_KA50_PVI

Ekran_init.lua

ED_KA50_Ekran

CautionLights_panel.lua

ED_KA50_CautionLights

--]]

{

Center =

{

x = 0;

y = 0;

width = 1920;

height = 1080;

viewDx = 0;

viewDy = 0;

aspect = 1.6;

}

}

--//////////////////////////////////////

-- Eagle Dynamics A-10C =

--//////////////////////////////////////

ED_A10C_LEFT_MFCD =

{

x = 1977;

y = 462;

width = 378;

height = 378;

}

ED_A10C_RIGHT_MFCD =

{

x = 2925;

y = 461;

width = 376;

height = 376;

}

ED_A10C_CDU =

{

x = 2980;

y = 80;

width = 300;

height = 300;

}

ED_A10C_CLOCK =

{

x = 2700;

y = 80;

width = 200;

height = 200;

}

ED_A10C_RWR =

{

x = 2300;

y = 100;

width = 170;

height = 170;

}

ED_A10C_CMSP =

{

x = 1985;

y = 125;

width = 220;

height = 75;

}

ED_A10C_CMSC =

{

x = 1985;

y = 275;

width = 220;

height = 75;

}

ED_A10C_UHF_FREQUENCY_STATUS =

{

x = 2752;

y = 300;

width = 100;

height = 45;

}

UIMainView = Viewports.Center

--//////////////////////////////////////

-- Eagle Dynamics Ka-50 =

--//////////////////////////////////////

ED_KA50_ABRIS =

{

x = 500;

y = 600;

width = 300;

height = 300;

}

ED_KA50_Shkval =

{

x = 0;

y = 600;

width = 300;

height = 300;

}

ED_KA50_UV26 =

{

x = 300;

y = 600;

width = 200;

height = 300;

}

ED_KA50_PVI =

{

x = 800;

y = 300;

width = 300;

height = 300;

}

ED_KA50_Ekran =

{

x = 800;

y = 600;

width = 300;

height = 300;

}

ED_KA50_CautionLights =

{

x = 800;

y = 0;

width = 500;

height = 500;

}

--//////////////////////////////////////

-- Eagle Dynamics FC3 =

--//////////////////////////////////////

LEFT_MFCD =

{

x = 57;

y = 1134;

width = 444;

height = 444;

}

---------------------------------------------------------------

I see a bunch of LUA files in DCS 1.5 that I dont think were around when this thread was made. Should I be entering this data into a different LUA file?

A10 and everything else works fine?