FZG_Immel Posted September 18, 2018 Share Posted September 18, 2018 After last update I lost one of my control. I had found on this forum a line of code to have a master arm toggle that would work in direct X with my warthog. Cannot find it anymore.. basically moving the switch up would switch master arm on on and it would stay so until the switch was brought back, and then master arm OFF... Somebody has it ? [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
hansangb Posted September 19, 2018 Share Posted September 19, 2018 It's a target script. Are you thinking of this one? https://forums.eagle.ru/showpost.php?p=2563187&postcount=1 hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 Thanks, Not looking for a target script. I don't want to program anything in target. I used switches as direct x imput. It was a modification of the D.C.s file that added a new control in the D.C.s control menu that made the switch go up and down in conjunction with the switch on the warthog- It was actually a line of code. [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
Bob_Bushman Posted September 19, 2018 Share Posted September 19, 2018 I am getting _backup.000 , _backup.001 folders in my DCS main folder. Each seem to contain backups of the binding files I have customised and the updater seem to make a new one for each update. check in the file structure there and I think it should be there. i7 8700k @ 4.7, 32GB 2900Mhz, 1080ti, CV1 Virpil MT-50\Delta, MFG Crosswind, Warthog Throttle, Virptil Mongoost-50 throttle. Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 I am getting _backup.000 , _backup.001 folders in my DCS main folder. Each seem to contain backups of the binding files I have customised and the updater seem to make a new one for each update. check in the file structure there and I think it should be there. That would be great. Let me check. Thanks ! [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 nah, can't find it there. where is stored the files with all available key input for the F/A-18C ? thats the file I modified, but I cannot even find it. look, the refueling probe key, works as intended... flip the switch up and it extract. flip the switch down and it extracts. the Master Arm doesnt work that day.. when you flip the switch up, it goes ARM, but when you flip the switch down nothing happens. You need another complete cycle of the switch to go master arm OFF it's that file that I need to modify. But damn I cannot even find it anymore. any idea where it is ? [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 Ok, I found the file : \Eagle Dynamics\DCS World OpenBeta\Mods\aircraft\FA-18C\Input\FA-18C\keyboard\default.lua now to edit it with the correct line. Damn I I cannot find that line again [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 Now I remember, it was a line of code to add in the 'Special for Joystick' Category. Master arm is absent there from default [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 Basically this is what i need, but for the master arm : this one is the special for joystick command for the probe { down = fuel_commands.ProbeControlSw, up = fuel_commands.ProbeControlSw, cockpit_device_id = devices.FUEL_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('Probe Control Switch - EXTEND/RETRACT'), category = {_('Special For Joystick'), _('Left Console'), _('Fuel Control Panel')}}, I tried devising my own for the master arm, but it doesnt work. Damnit, Im sure I found it on this forum originally { down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down = 1.0, value_up = 0.0, name = _('Master Arm Switch - ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}}, [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 this sums up what im trying to do, but I am unable to do it for the master arm of the hornet. https://forums.eagle.ru/showthread.php?t=89226&highlight=Special+Joystick [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 19, 2018 Author Share Posted September 19, 2018 I found the thread finally : https://forums.eagle.ru/showthread.php?t=210542&highlight=Master+arm [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
LeCuvier Posted September 20, 2018 Share Posted September 20, 2018 (edited) This is how I did it: {down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down = 1.0, value_up = 0.0, name = _('Master Arm Switch 2-Pos ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}},Works just fine. I'm struggling to understand why the code in your post #9 doesn't work. I got it: You used the same name as the existing toggle command. You must use a new name! Edited September 20, 2018 by LeCuvier LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to comment Share on other sites More sharing options...
98abaile Posted September 20, 2018 Share Posted September 20, 2018 I created several extra bindings suitable to the warthog here. Includes master arm, hook, landing gear and external light switch. Link to comment Share on other sites More sharing options...
LeCuvier Posted September 20, 2018 Share Posted September 20, 2018 These are all additions I made to-date: {down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down = 1.0, value_up = 0.0, name = _('Master Arm Switch 2-Pos ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}}, {down = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, up = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, cockpit_device_id = devices.HOTAS, value_down = 1.0, value_up = 0.0, name = _('Exterior Lights 2-Pos ONOFF'), category = {_('Throttle Grip'), _('HOTAS')}}, {down = iCommandPlaneGearUp, up = iCommandPlaneGearDown, name = _('Landing Gear Control Handle 2-Pos UP/DOWN'), category = {_('Left Vertical Panel')}}, {down = gear_commands.HookHandle, up = gear_commands.HookHandle, cockpit_device_id = devices.GEAR_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('Arresting Hook Handle 2-Pos UP/DOWN'), category = {_('Right Vertical Panel')}}, {down = HUD_commands.HUD_AltitudeSw, up = HUD_commands.HUD_AltitudeSw, cockpit_device_id = devices.HUD, value_down = 1.0, value_up = 0.0, name = _('Altitude Switch 2-Pos BARO/RADAR'), category = {_('Instrument Panel'), _('HUD Control Panel')}}, {down = cpt_commands.CanopySwitchClose, up = cpt_commands.CanopySwitchOpen, cockpit_device_id = devices.CPT_MECHANICS, value_down = -1.0, value_up = 1.0, name = _('Canopy Control Switch 2-Pos OPEN/CLOSE'), category = {_('Right Wall'), _('Systems')}}, {down = oxygen_commands.OBOGS_ControlSw, up = oxygen_commands.OBOGS_ControlSw, cockpit_device_id = devices.OXYGEN_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('OBOGS Control Switch 2-Pos ON/OFF'), category = {_('Left Console')}}, {down = cptlights_commands.HookBypass, up = cptlights_commands.HookBypass, cockpit_device_id = devices.CPT_LIGTHS, value_down = -1.0, value_up = 1.0, name = _('Hook Bypass 2-Pos Switch CARRIER/FIELD/CARRIER'), category = {_('Left Vertical Panel')}}, {down = gear_commands.LaunchBarSw, up = gear_commands.LaunchBarSw, cockpit_device_id = devices.GEAR_INTERFACE, value_down = -1.0, value_up = 1.0, name = _('Launch Bar Control 2-Pos Switch RETRACT/EXTEND'), category = {_('Left Vertical Panel')}}, LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted September 20, 2018 Author Share Posted September 20, 2018 Magnifique ! merci bcp ! [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
redtail Posted September 22, 2018 Share Posted September 22, 2018 (edited) This is how I did it: {down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down = 1.0, value_up = 0.0, name = _('Master Arm Switch 2-Pos ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}},Works just fine. I'm struggling to understand why the code in your post #9 doesn't work. I got it: You used the same name as the existing toggle command. You must use a new name! I have a lighted toggle switch (with safety cover) mounted to my desktop/pit. I use this for my Master Arm switch and couldn't figure out how to make it work as intended, until I saw your post. Now I'll try to replicate this for the other two switches and assign them to AA and AG. THANKS! edit: just realized the AA/AG are push buttons, not toggle switches. They're already coded for two pushes. Edited September 22, 2018 by redtail ~Redtail~ [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
FZG_Immel Posted October 10, 2018 Author Share Posted October 10, 2018 (edited) These are all additions I made to-date: {down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down = 1.0, value_up = 0.0, name = _('Master Arm Switch 2-Pos ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}}, {down = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, up = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, cockpit_device_id = devices.HOTAS, value_down = 1.0, value_up = 0.0, name = _('Exterior Lights 2-Pos ONOFF'), category = {_('Throttle Grip'), _('HOTAS')}}, {down = iCommandPlaneGearUp, up = iCommandPlaneGearDown, name = _('Landing Gear Control Handle 2-Pos UP/DOWN'), category = {_('Left Vertical Panel')}}, {down = gear_commands.HookHandle, up = gear_commands.HookHandle, cockpit_device_id = devices.GEAR_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('Arresting Hook Handle 2-Pos UP/DOWN'), category = {_('Right Vertical Panel')}}, {down = HUD_commands.HUD_AltitudeSw, up = HUD_commands.HUD_AltitudeSw, cockpit_device_id = devices.HUD, value_down = 1.0, value_up = 0.0, name = _('Altitude Switch 2-Pos BARO/RADAR'), category = {_('Instrument Panel'), _('HUD Control Panel')}}, {down = cpt_commands.CanopySwitchClose, up = cpt_commands.CanopySwitchOpen, cockpit_device_id = devices.CPT_MECHANICS, value_down = -1.0, value_up = 1.0, name = _('Canopy Control Switch 2-Pos OPEN/CLOSE'), category = {_('Right Wall'), _('Systems')}}, {down = oxygen_commands.OBOGS_ControlSw, up = oxygen_commands.OBOGS_ControlSw, cockpit_device_id = devices.OXYGEN_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('OBOGS Control Switch 2-Pos ON/OFF'), category = {_('Left Console')}}, {down = cptlights_commands.HookBypass, up = cptlights_commands.HookBypass, cockpit_device_id = devices.CPT_LIGTHS, value_down = -1.0, value_up = 1.0, name = _('Hook Bypass 2-Pos Switch CARRIER/FIELD/CARRIER'), category = {_('Left Vertical Panel')}}, {down = gear_commands.LaunchBarSw, up = gear_commands.LaunchBarSw, cockpit_device_id = devices.GEAR_INTERFACE, value_down = -1.0, value_up = 1.0, name = _('Launch Bar Control 2-Pos Switch RETRACT/EXTEND'), category = {_('Left Vertical Panel')}}, after the new update, I cannot use this anymore ? same for you =? they appear in the control menu but I cannot affect any switch or button or key to them Edited October 10, 2018 by FZG_Immel [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted October 10, 2018 Author Share Posted October 10, 2018 nevermind. I was in the wrong file [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
tribundf Posted October 23, 2018 Share Posted October 23, 2018 Check this video. I got it to work just fine with gear, hook, master arm etc. I’m not on my computer right now, but I can send you the correct line for the default.lua later today. Link to comment Share on other sites More sharing options...
FZG_Immel Posted February 15, 2019 Author Share Posted February 15, 2019 (edited) These are all additions I made to-date: {down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down = 1.0, value_up = 0.0, name = _('Master Arm Switch 2-Pos ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}}, {down = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, up = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, cockpit_device_id = devices.HOTAS, value_down = 1.0, value_up = 0.0, name = _('Exterior Lights 2-Pos ONOFF'), category = {_('Throttle Grip'), _('HOTAS')}}, {down = iCommandPlaneGearUp, up = iCommandPlaneGearDown, name = _('Landing Gear Control Handle 2-Pos UP/DOWN'), category = {_('Left Vertical Panel')}}, {down = gear_commands.HookHandle, up = gear_commands.HookHandle, cockpit_device_id = devices.GEAR_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('Arresting Hook Handle 2-Pos UP/DOWN'), category = {_('Right Vertical Panel')}}, {down = HUD_commands.HUD_AltitudeSw, up = HUD_commands.HUD_AltitudeSw, cockpit_device_id = devices.HUD, value_down = 1.0, value_up = 0.0, name = _('Altitude Switch 2-Pos BARO/RADAR'), category = {_('Instrument Panel'), _('HUD Control Panel')}}, {down = cpt_commands.CanopySwitchClose, up = cpt_commands.CanopySwitchOpen, cockpit_device_id = devices.CPT_MECHANICS, value_down = -1.0, value_up = 1.0, name = _('Canopy Control Switch 2-Pos OPEN/CLOSE'), category = {_('Right Wall'), _('Systems')}}, {down = oxygen_commands.OBOGS_ControlSw, up = oxygen_commands.OBOGS_ControlSw, cockpit_device_id = devices.OXYGEN_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('OBOGS Control Switch 2-Pos ON/OFF'), category = {_('Left Console')}}, {down = cptlights_commands.HookBypass, up = cptlights_commands.HookBypass, cockpit_device_id = devices.CPT_LIGTHS, value_down = -1.0, value_up = 1.0, name = _('Hook Bypass 2-Pos Switch CARRIER/FIELD/CARRIER'), category = {_('Left Vertical Panel')}}, {down = gear_commands.LaunchBarSw, up = gear_commands.LaunchBarSw, cockpit_device_id = devices.GEAR_INTERFACE, value_down = -1.0, value_up = 1.0, name = _('Launch Bar Control 2-Pos Switch RETRACT/EXTEND'), category = {_('Left Vertical Panel')}}, after the latest update these don't work anymore. Any idea why ? NEVERMIND: I just had to reaffect the controls Edited February 15, 2019 by FZG_Immel [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
Recommended Posts