jayst0r Posted February 19, 2020 Share Posted February 19, 2020 Hi, there seems to be a problem witch the dogfight switch aft function. Testet witch custom mission and the Instant action Mission "Offensive Basic Fighter Maneuvers". First go Dogfight Switch forward to enter missle Override mode. This works as intented AIM120C is selected, now go dogfight switch aft. Normally AIM9 should be selected but is not. There is a second problem with the dogfight aft switch, if you switch from forward through middle then aft(BOAT Switch Throttle Warthog) a few times within one second sometimes (mostly after 3-4 times) the radar bugs out. on the HUD it then says "DGFT" but the "No RAD" message does not appear when in this state the Egg on the Helmet mounted cueing system is not visible when selecting special radar modes. And it will not lock in special mode. Further more the FCS page on the MFD shows OSB20 and OSB19 for range change active. So I suspect it did not enter DGFT mode. Link to comment Share on other sites More sharing options...
Frederf Posted February 19, 2020 Share Posted February 19, 2020 Reading some manuals there is actually the suggestion that maybe it is up to the pilot to set which missile should be selected in MRM or DGFT. This might be able to be programmed in the DTC before flight. Regardless the missile selection should be retained so if nothing else you should be able to enter DGFT, pick your desired missile, and it'll be selected again when you re-enter it later. Link to comment Share on other sites More sharing options...
Santi871 Posted February 19, 2020 Share Posted February 19, 2020 The 1st one is already reported, the 2nd one I can't reproduce, do you have a track? Link to comment Share on other sites More sharing options...
jayst0r Posted February 20, 2020 Author Share Posted February 20, 2020 yes of course here you go: https://drive.google.com/file/d/1cImrMLOr6ukIcG-3F1mN7sLH_R6PUki0/viewDGFT Switch aft .zip Link to comment Share on other sites More sharing options...
Recommended Posts