Mars Exulte Posted December 20, 2017 Share Posted December 20, 2017 (edited) Following normal power up procedures, the APU will spool up, but intermittently the turbine will not. I originally thought this was over sensitivity with the random system failures, but after some flights with it disabled, it still does it. Usually, spawning a new plane will yield a successful start. I'm not sure what other information to provide, as it's not related to any specific mission or circumstance, nor does it do it in any predictable pattern. Usually it works. Sometimes it doesn't. Not Harrier related. Throttle acting up. Edited December 21, 2017 by zhukov032186 Де вороги, знайдуться козаки їх перемогти. 5800x3d * 3090 * 64gb * Reverb G2 Link to comment Share on other sites More sharing options...
Redeye Posted December 21, 2017 Share Posted December 21, 2017 Check the AV8BNA Pocket Guide.pdf located in your install folders. C:\Program Files\Eagle Dynamics\DCS World 2 OpenAlpha\Mods\aircraft\AV8BNA\Doc Look at page 7 item 7. The Throttle Cutoff Lever is hidden between the parking brake and throttle. Link to comment Share on other sites More sharing options...
104th_Maverick Posted December 21, 2017 Share Posted December 21, 2017 Can't reproduce this, you will need to submit a track of it happening. Just make sure you are not tripping your fuel cut off switch as Redeye mentions. [sIGPIC][/sIGPIC] 104th Phoenix Wing Commander / Total Poser / Elitist / Hero / Chad www.104thPhoenix.com www.facebook.com/104thPhoenix My YouTube Channel Link to comment Share on other sites More sharing options...
Mars Exulte Posted December 21, 2017 Author Share Posted December 21, 2017 (edited) @Redeye Yes, I'm aware of the fuel cutoff. You're not going to accidentally hit it since the start up procedure doesn't involve anything remotely near the throttle. @Maverick As I said, it's not reliably reproducible. I'll try to find a track of it doing it, or otherwise record it. Will update asap -edit Not related, but the master caution does not always come on like it should, and frequently sounds/fx persist from one session to the next track of no master caution, still trying to get it to the do the turbine failure again -edit Turbine failure uploaded In the track, I checked my switches, switched it off, attempted restart, still fails. I checked my throttle was at zero before the second attempt. The first series of tests, I was relaunching the mission repeatedly, and it was always successful. I closed the game, and relaunched DCS the second round of tests, on this attempt the turbine failed to start. So it may be a "it does or it doesn't" sort of thing.NoMasterCaution.trkTurbine Failure.trk Edited December 21, 2017 by zhukov032186 Де вороги, знайдуться козаки їх перемогти. 5800x3d * 3090 * 64gb * Reverb G2 Link to comment Share on other sites More sharing options...
Vladinsky Posted December 21, 2017 Share Posted December 21, 2017 The next time you get this make sure that the throttle is at the furthest back cut-off position and not idle, simply moving the throttle forward is enough to leave the cut-off position and will inhibit the engine start cycle until you use the cut-off lever to bring it all the way back. Link to comment Share on other sites More sharing options...
Mars Exulte Posted December 21, 2017 Author Share Posted December 21, 2017 (edited) edited for incorrect possibly throttle jitter causing the throttle to move? I will investigate more closely -edit Confirmed, in the track I uploaded, for some reason or other, the throttle is slightly forward. Not sure what specifically is causing that, but it's not a "glitch" anyway. Retracting report. Edited December 21, 2017 by zhukov032186 Де вороги, знайдуться козаки їх перемогти. 5800x3d * 3090 * 64gb * Reverb G2 Link to comment Share on other sites More sharing options...
Recommended Posts