Jump to content

AI Escort issue....sort of


Ryno1217

Recommended Posts

Im having trouble with something hopefully someone here can shed some light on.

 

I want to set up an AI Escort that does the following:

 

Escorts player/unit until a given way point

then stops escort and flies to an orbit point

Orbits until certain conditions are met

once conditions are met, the AI restarts the escort on the given player/unit.

 

Now I figured out the commands and triggers to get this to work, but the issue I have is that when the escort command stops, the AI flies to its original start point (way point 0) before going to the orbit point. Obviously, this doesn't work when the start point is 50+ miles away from the orbit point....so I'm drawing a blank on how to get the AI not to fly to way point 0 when the escort stops.

 

Any suggestions???

Windows 10 64 bit, Intel i7 7700k @ 4.7ghz, 16 gb G-Skill Ripjaws DDR4 2800mhz ram, Asus Prime Z270-A mobo, EVGA RTX 2070, 240gb SSD,500gb Samsung 850 evo SSD,500gb HDD, Warthog stick, TWCS throttle,, Thrustmaster T-flight Rudder Pedals, Track IR 5

Link to comment
Share on other sites

Im having trouble with something hopefully someone here can shed some light on.

 

I want to set up an AI Escort that does the following:

 

Now I figured out the commands and triggers to get this to work, but the issue I have is that when the escort command stops, the AI flies to its original start point (way point 0) before going to the orbit point. Obviously, this doesn't work when the start point is 50+ miles away from the orbit point....so I'm drawing a blank on how to get the AI not to fly to way point 0 when the escort stops.

 

Any suggestions???

 

You will have to add a "switch waypoint command -> Orbit waypoint" directly after you escort command at the original start waypoint.

 

You will have to do the same for any other escort commands.

 

Regards, Ian.

Asus p877v-pro, Intel I7 3770k 4.2ghz, 32gb Ripjaw X ram, Nvidia RTX-2070 Super, Samsung 32" TV, Saitek x52 pro Joystick and Combat rudder pedals, TrackIR 5, Win8.1 x64 with SSD and SSHD protected by (Avast AV).

 

DCS Tech Support.

Link to comment
Share on other sites

Thanks. I will try when I’m back in front the computer.

Windows 10 64 bit, Intel i7 7700k @ 4.7ghz, 16 gb G-Skill Ripjaws DDR4 2800mhz ram, Asus Prime Z270-A mobo, EVGA RTX 2070, 240gb SSD,500gb Samsung 850 evo SSD,500gb HDD, Warthog stick, TWCS throttle,, Thrustmaster T-flight Rudder Pedals, Track IR 5

Link to comment
Share on other sites

You will have to add a "switch waypoint command -> Orbit waypoint" directly after you escort command at the original start waypoint.

 

 

This doesnt seem to work. AI still flies to original start waypoint (WPT 0) before heading to orbit WPT (WPT 1 in the attached mission). If you wouldnt mind, please look at the attached mission and see if I did something wrong. This is very basic to show what I am trying to do. There is stop conditions as well as triggers set up to get this task done.

 

Thanks in advance!

 

Ryno

 

Edit: Got it working. You were on the right path. The only difference is that I added the "switch waypoint" command BEFORE the escort command so now once the escort stops, the AI flies direct to orbit WPT.

Thank you for the guidance.


Edited by Ryno1217
Correctede

Windows 10 64 bit, Intel i7 7700k @ 4.7ghz, 16 gb G-Skill Ripjaws DDR4 2800mhz ram, Asus Prime Z270-A mobo, EVGA RTX 2070, 240gb SSD,500gb Samsung 850 evo SSD,500gb HDD, Warthog stick, TWCS throttle,, Thrustmaster T-flight Rudder Pedals, Track IR 5

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...