dureiken Posted April 21, 2018 Share Posted April 21, 2018 (edited) Hi, in order to know if an upgrade could be useful, can someone with a 8x00k test this ? I have only 46fps in parking with the blue M2000, seems that shadows take a lot. Mission file : http://www.mediafire.com/file/17cc99de137ddvr/Batumi%20131st%20Mirage-ETE.miz Option file : http://www.mediafire.com/file/mxelb6qjzfp8n9t/options.lua Even in LOW graph settings I have only 70fps. My spec : 6600k@4.6Ghz, 1080TI, 16GB. Thanks a lot for your help ! Edited April 22, 2018 by dureiken Link to comment Share on other sites More sharing options...
dureiken Posted April 22, 2018 Author Share Posted April 22, 2018 noone here to help me ? it could help others too :) Link to comment Share on other sites More sharing options...
David OC Posted April 22, 2018 Share Posted April 22, 2018 I set my 7700k to 4.6GHz and only running a 1070 stock clock and was seeing 50 - 60 fps in the Mirage, it's quite a large mission and took a bit to load 40 seconds. It doesn't seem right going off your spec and running a 1080ti? I'm only running 2560 x 1440, it's no that much different to your monitor. i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link Link to comment Share on other sites More sharing options...
dureiken Posted April 22, 2018 Author Share Posted April 22, 2018 in the mirage at parking side ? Link to comment Share on other sites More sharing options...
dureiken Posted April 22, 2018 Author Share Posted April 22, 2018 ok maybe I have a problem I put exactly the same settings than you, steady 50fps could you put back your 7700k to 5.0 Ghz ? thanks Link to comment Share on other sites More sharing options...
David OC Posted April 22, 2018 Share Posted April 22, 2018 (edited) I have around 47 FPS at Batumi with those settings. That's also turning back on Cockpit global illumination. At your rez you might be having a ram problem with this mission? It's eating lots of ram! I only have 16Gb also. Ram maxed Page file 25000 I've also been testing out process lasso at the moment, as you can see by the cores being utilized by DCS. . Edited April 22, 2018 by David OC i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link Link to comment Share on other sites More sharing options...
dureiken Posted April 22, 2018 Author Share Posted April 22, 2018 Ok, I tried with your settings : 47-48fps with mine 46-47fps, don't think it comes from GFX, but limitation of DCS engine. edit : I edited my first post as I was another mission file Link to comment Share on other sites More sharing options...
dureiken Posted April 22, 2018 Author Share Posted April 22, 2018 (edited) I tried with 4.6Ghz : and 5.1Ghz : we can see that the scenery is CPU limited, but could a 8600k/8700k @ 5.0ghz do better ? Edited April 22, 2018 by dureiken Link to comment Share on other sites More sharing options...
David OC Posted April 22, 2018 Share Posted April 22, 2018 (edited) You are maxing out the GPU 99% in that last picture when over 5Ghz on the CPU, I think that's the best you could hope for, I'm surprised it's not more? As I could hit the 47 FPS with the 1070. Then again you are running at a higher Rez also! This should get much better when ED fixes the memory management and vulkan api cannot come soon enough!! I dont think upgrading will give you much benefit if you can now push your CPU 5.1 GHz, that matches your GPU as seen in the last pic. . Edited April 22, 2018 by David OC i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link Link to comment Share on other sites More sharing options...
BitMaster Posted April 22, 2018 Share Posted April 22, 2018 When you actually move that bird across the map, much more important will be how much you drop with the lowest fps due to the CPU being flooded at certain times and scenes. The CPU in screenshot #2 is at roughly 50% across the cores, not really stressed. What's the worst framerate and frametime after a real mission, that matters much more imho. But with recent i5/i7's at 5GHz you basically have a top CPU and more just ain't possible right now. That's all you can do. With All-In and WQHD I can well stay above 50 fps lowest fps in wcs, keeping me in Gsync. For 90% of the maps, it is good for 70-100+ fps. I accept the 50ish lowest fps over Vegas etc. for the LOD and immersion I get. Gsync keeps it still acceptable for the eye. VR is a totally different story and nothing really applies. Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X Link to comment Share on other sites More sharing options...
dureiken Posted April 22, 2018 Author Share Posted April 22, 2018 Hi bitmaster thanks for your reply. I have a gsync screen too but disabled it, did you tune dcs with nvidia inspector ? thanks Link to comment Share on other sites More sharing options...
BitMaster Posted April 22, 2018 Share Posted April 22, 2018 never used nvidia inspector. Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X Link to comment Share on other sites More sharing options...
hansangb Posted April 24, 2018 Share Posted April 24, 2018 (edited) Hi, in order to know if an upgrade could be useful, can someone with a 8x00k test this ? I have only 46fps in parking with the blue M2000, seems that shadows take a lot. Mission file : http://www.mediafire.com/file/17cc99de137ddvr/Batumi%20131st%20Mirage-ETE.miz Option file : http://www.mediafire.com/file/mxelb6qjzfp8n9t/options.lua Even in LOW graph settings I have only 70fps. My spec : 6600k@4.6Ghz, 1080TI, 16GB. Thanks a lot for your help ! Tried it with your settings (thanks to google translate). Blue 1, sitting and looking around, 60's to 70s. Lowest I saw was 58 maybe? Looking at the clouds seemed to cause it to dip to 58. Otherwise, 60, 70. Flew around the airbase low, and stayed at 90, 100, 110 for the most part. Dipped to 80 when I first flew over the base again. But it was mostly triple digits. Hope that helps EDIT: I also exited the first time it loaded (took a long time, two min, maybe?). Exited immediately and came back in (loaded in 10 secs?) and looked at the FPS. Edited April 24, 2018 by hansangb hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
dureiken Posted April 24, 2018 Author Share Posted April 24, 2018 (edited) Ok. It seems that 8700k to 5.0ghz helps a lot ! Thanks for your help Edited April 24, 2018 by dureiken Link to comment Share on other sites More sharing options...
BitMaster Posted April 24, 2018 Share Posted April 24, 2018 It sure does ! Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X Link to comment Share on other sites More sharing options...
dureiken Posted May 18, 2018 Author Share Posted May 18, 2018 Just for others : I finally bought a 8600k, going to 5.2ghz, and I gone from 48fps with my 6600k@4.8ghz to 66fps at docking :) Link to comment Share on other sites More sharing options...
BitMaster Posted May 19, 2018 Share Posted May 19, 2018 Just for others : I finally bought a 8600k, going to 5.2ghz, and I gone from 48fps with my 6600k@4.8ghz to 66fps at docking :) You gotta have a heart for Hertz :thumbup: Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X Link to comment Share on other sites More sharing options...
Tomcat84 Posted May 20, 2018 Share Posted May 20, 2018 I have around 47 FPS at Batumi with those settings. That's also turning back on Cockpit global illumination. At your rez you might be having a ram problem with this mission? It's eating lots of ram! I only have 16Gb also. Ram maxed Page file 25000 I've also been testing out process lasso at the moment, as you can see by the cores being utilized by DCS. . How can I get that overlay showing GPU and RAM usage etc ? It’s not process lasso is it? Link to comment Share on other sites More sharing options...
dureiken Posted May 20, 2018 Author Share Posted May 20, 2018 MSI afterbuner + rivatuner statistic Link to comment Share on other sites More sharing options...
Recommended Posts