kaba Posted June 10, 2020 Author Share Posted June 10, 2020 (edited) I'm experiencing no CTD on landing after today's patch. Can I ask you to please let me know if this still occurs after the update on your side? Edit - actually, a lot of new bugs in this patch. Might want to hold off until a hotfix can help this out... Edited June 10, 2020 by kaba Link to comment Share on other sites More sharing options...
Razor18 Posted June 10, 2020 Share Posted June 10, 2020 Sure, will try it again and report back. Link to comment Share on other sites More sharing options...
Razor18 Posted June 15, 2020 Share Posted June 15, 2020 Guys, with all this freakin bugs around (blind radar as far as I can remember the worst), is it worth to even start up any mission nowadays? Link to comment Share on other sites More sharing options...
kaba Posted June 15, 2020 Author Share Posted June 15, 2020 I've had no issues in the latest patch, except for the Case II ATC loudly repeating. I can understand if you'd prefer to wait though. Link to comment Share on other sites More sharing options...
zildac Posted July 3, 2020 Share Posted July 3, 2020 Tips for mission 3 Hi All, Any tips for mission 3 (Railyard). Obviously no targetting pod and "dumb bombs" is it just a case of eyeballing the targets at WP3 and using CCIP? Would there be an issue changing the loadout to GBU's and adding a targetting pod, or will I break something in the mission logic. Yes I suck at CCIP drops :-) Really enjoyed the first two missions, not too tricky even for me :smilewink: 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
Cornflex Posted July 3, 2020 Share Posted July 3, 2020 This campaign is awesome! Thank you, kaba. What level is the enemy pilot AI set to? Is it random? i9 13900K, Asus ROG Z690-E Wifi, 32GB DDR5 6400RAM, Asus RTX 4090 TUF, TM Warthog with F-16 Stick, Trackir 5, Windows 11 Link to comment Share on other sites More sharing options...
Razor18 Posted July 3, 2020 Share Posted July 3, 2020 Hi All, Any tips for mission 3 (Railyard). Obviously no targeting pod and "dumb bombs" is it just a case of eyeballing the targets at WP3 and using CCIP? Would there be an issue changing the loadout to GBU's and adding a targetting pod, or will I break something in the mission logic. Yes I suck at CCIP drops :-) Really enjoyed the first two missions, not too tricky even for me :smilewink: You can do it with the same dumb bomb, but dropping them AUTO with TGP on. Link to comment Share on other sites More sharing options...
zildac Posted July 3, 2020 Share Posted July 3, 2020 You can do it with the same dumb bomb, but dropping them AUTO with TGP on. Good idea :thumbup: 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
speed-of-heat Posted July 3, 2020 Share Posted July 3, 2020 Hi All, Any tips for mission 3 (Railyard). Obviously no targetting pod and "dumb bombs" is it just a case of eyeballing the targets at WP3 and using CCIP? Would there be an issue changing the loadout to GBU's and adding a targetting pod, or will I break something in the mission logic. Yes I suck at CCIP drops :-) Really enjoyed the first two missions, not too tricky even for me :smilewink: Line up on the railway line ... SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
zildac Posted July 3, 2020 Share Posted July 3, 2020 Line up on the railway line ... Thankyou :thumbup: 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
Razor18 Posted July 3, 2020 Share Posted July 3, 2020 And if you line up perpendicular and lay down a string of 4 bombs with 100 feet of separation, you can also get the armor in the parking lot on the same run in... 1 Link to comment Share on other sites More sharing options...
kaba Posted July 3, 2020 Author Share Posted July 3, 2020 There should be no issue with changing the loadouts on these missions, but be careful of fuel! This mission is pretty forgiving, you only need to take out one target and they are not hardened. CCRP, CCIP, LGBs, totally up to you. There's nothing preventing you from hitting it with JDAM or even JSOW if you really want, although I don't think they were invented yet... Link to comment Share on other sites More sharing options...
Razor18 Posted July 3, 2020 Share Posted July 3, 2020 Can you also confirm there is no more CTD on the way home near the carrier? Link to comment Share on other sites More sharing options...
speed-of-heat Posted July 3, 2020 Share Posted July 3, 2020 i ran mission 2 again last night which was causing the grief and it was OK ... no infinite repeat message and no CTD on exfil SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
kaba Posted July 3, 2020 Author Share Posted July 3, 2020 there was a CTD on AI CASE II landings. I'd previously reported this to ED and it seems to have been quietly fixed in a recent patch. I've also changed up the weather in the latest campaign version to avoid CASE II's entirely (both to avoid the bug, and also because I find them quite boring vs CASE I & CASE III) So short answer, I'm not aware of any new bugs and nobody else is reporting any. If you do experience some, then please let me know, but you also need to report CTDs to Eagle Dynamics rather than just me. Link to comment Share on other sites More sharing options...
zildac Posted July 3, 2020 Share Posted July 3, 2020 And if you line up perpendicular and lay down a string of 4 bombs with 100 feet of separation, you can also get the armor in the parking lot on the same run in... Thanks! :thumbup: 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
zildac Posted July 3, 2020 Share Posted July 3, 2020 Thanks Kaba, much appreciated 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
zildac Posted July 3, 2020 Share Posted July 3, 2020 OK, last question promise :music_whistling: So I saw the post re MP and just changing the wingman and player to client, trouble is as soon as I do that and fire the mission up on my dedicated MP server I get the classic "your flight is delayed for takeoff". Makes no odds if the mission has just loaded on the server or if it's been running for 10 mins. Is this an impossible want or am I missing something? 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
kaba Posted July 4, 2020 Author Share Posted July 4, 2020 Sounds like the carrier doesn't have any spawn slots at the time you spawn, so you have to wait for AI to take off. Supercarrier or normal carrier? Link to comment Share on other sites More sharing options...
zildac Posted July 4, 2020 Share Posted July 4, 2020 (edited) Hi Kaba, It's on the supercarrier. It could be that I guess, but in theory there should be a slot for me and my AI wingman (as per the original miz file) so I would have expected for those two slots to still be available when I change the flight to both be "client" on the same units? Or does it not work quite that simply? Edited July 4, 2020 by zildac 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
kaba Posted July 4, 2020 Author Share Posted July 4, 2020 Might be something to do with how DCS assigns start positions between different players - are you starting on the Cat? Could you try from the ramp, either cold start or hot start? Link to comment Share on other sites More sharing options...
zildac Posted July 4, 2020 Share Posted July 4, 2020 (edited) Might be something to do with how DCS assigns start positions between different players - are you starting on the Cat? Could you try from the ramp, either cold start or hot start? Hi Kaba, Just checked and both units set to "takeoff from parking hot" as per the original miz. I guess zapping a few of the statics on the elevator may help if it is indeed a slot problem? Update: OK so if the mission is run locally it's fine (with both slots set to client) which of course is no good if you actually want to play with someone else in the other slot. So I removed the 3 statics on the elevator near CAT1 & 2, and it now allows me in with no "your flight is delayed" message when the miz is run on the dedicated server. I'll do some more testing and feedback :thumbup: Edited July 4, 2020 by zildac 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
drhay53 Posted July 5, 2020 Share Posted July 5, 2020 having trouble on mission5, OCA West. Spoiler alert. I can't seem to get my bombs away before the SA-6 gets me. Any tips for how you approached this? Link to comment Share on other sites More sharing options...
speed-of-heat Posted July 5, 2020 Share Posted July 5, 2020 one pass haul ass ... set up ccip as your bomb mode, with a single release programmed at about 50nm give your wingman engage complete and rejoin go south of your WP, aim to to be 20nm south, along the line of the target bomb fall, before rolling in lining up on one side or the other as the pipper crosses the first target, release, shallow your decent and pickle the next three targets adjusting your heading, break east or west hard after the last bomb comes off, and the notch the SA-6's as they engage you with luck you wont even need chaff or flares... SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
speed-of-heat Posted July 5, 2020 Share Posted July 5, 2020 Just finished Mission 6 again;) my wingman tried to land on one of the escorts ... he fared poorly ... SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Recommended Posts