YSIAD_RIP Posted June 30, 2023 Share Posted June 30, 2023 @=Andre=, I can report that I had success with your suggestion of replacing the 2.2 Ohm Surface Mount Resistors with the Resettable Fuses you recommended. I replaced the two burned Resistors (R34 & R36) and this #6 Vibration motor located at the top right of the seat. Let me know if you think I should also replace R35 and R37 even though they look good and the vibration motors are all working. I hope this information helps anyone else out there with a similar problem. Thanks again! 2 Do not own: | F-15E | JF-17 | Fw 190 A-8 | Bf 109 | Hardware: [ - Ryzen7-5800X - 32GB - RX 6800 - X56 HOTAS Throttle - WINWING Orion 2 F16EX Grip - TrackIR 5 - Tobii 5C - JetPad FSE - ] Link to comment Share on other sites More sharing options...
=Andre= Posted July 1, 2023 Share Posted July 1, 2023 13 hours ago, YSIAD_RIP said: @=Andre=, I can report that I had success with your suggestion of replacing the 2.2 Ohm Surface Mount Resistors with the Resettable Fuses you recommended. I replaced the two burned Resistors (R34 & R36) and this #6 Vibration motor located at the top right of the seat. Let me know if you think I should also replace R35 and R37 even though they look good and the vibration motors are all working. I hope this information helps anyone else out there with a similar problem. Thanks again! Great news. You are a handy man! I don't think you should. Just be prepared to do that if it's needed. 2 Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
YSIAD_RIP Posted August 22, 2023 Share Posted August 22, 2023 On 7/1/2023 at 3:54 AM, =Andre= said: Great news. You are a handy man! I don't think you should. Just be prepared to do that if it's needed. @=Andre=LoL.. My Surface Mount Soldering skills are non-existent - The same motor failed. I just replaced and resoldered the replaceable fuses again and the upper right motor [6] is happy. Hopefully, my solder skills improved since June! Happy flying. 1 Do not own: | F-15E | JF-17 | Fw 190 A-8 | Bf 109 | Hardware: [ - Ryzen7-5800X - 32GB - RX 6800 - X56 HOTAS Throttle - WINWING Orion 2 F16EX Grip - TrackIR 5 - Tobii 5C - JetPad FSE - ] Link to comment Share on other sites More sharing options...
MAXsenna Posted August 22, 2023 Share Posted August 22, 2023 1 hour ago, YSIAD_RIP said: @=Andre=LoL.. My Surface Mount Soldering skills are non-existent - The same motor failed. I just replaced and resoldered the replaceable fuses again and the upper right motor [6] is happy. Hopefully, my solder skills improved since June! Happy flying. Have you seen this guy? Learned a couple of tricks myself. https://www.youtube.com/@NorthridgeFix 1 Link to comment Share on other sites More sharing options...
YSIAD_RIP Posted August 22, 2023 Share Posted August 22, 2023 Yes.. watched many of his videos.. I love how some people with "tiny brains" try to take him to court too.. lol. Thanks. Cheers. 1 Do not own: | F-15E | JF-17 | Fw 190 A-8 | Bf 109 | Hardware: [ - Ryzen7-5800X - 32GB - RX 6800 - X56 HOTAS Throttle - WINWING Orion 2 F16EX Grip - TrackIR 5 - Tobii 5C - JetPad FSE - ] Link to comment Share on other sites More sharing options...
mac22 Posted November 5, 2023 Share Posted November 5, 2023 have the jet seat (not set it up yet) - also have a buttkicker that I use with andre's sound modules for DCS - just want to know the best way to set everything up so it works together? (mainly be using it with the apache) - can also see in the aviator software settings there is an output mode usb jetseat drop down? Link to comment Share on other sites More sharing options...
cordite Posted January 14 Share Posted January 14 (edited) On 4/14/2017 at 10:30 PM, Chief1942 said: Just wanted to give Andre and his crew another "job well done". I unfortunately experienced the loss of "pi 13" in the DIN connector and was thinking about asking Andre how I might purchase just the controller for the seat. On going to his website, I see this video for fixing the "pin 13" issue. Watched the video, followed the instructions and problem solved. What a great bunch that they even help us klutz's when we break something. Thanks Andre and crew. Checked his website, can't find this. Anyone have a link? edit: Found it: Edited January 14 by cordite Link to comment Share on other sites More sharing options...
Recommended Posts