Scooternutz Posted April 22, 2016 Share Posted April 22, 2016 (edited) I did and it does send keys to notepad. Resolved: Removed all mods. repaired installation. Edited April 23, 2016 by Scooternutz [sIGPIC]https://drive.google.com/file/d/16rUBmmJR7A3YGZVGPGskxG1XtvulGojJ/view?usp=sharing[/sIGPIC] Link to comment Share on other sites More sharing options...
jasonstory44 Posted May 10, 2016 Share Posted May 10, 2016 Hi guys, I was wondering if any of you could give me input or advice. I'm getting my acer 27 inch touchscreen tomorrow and am excited to try out Helios for the first time. I've watched some videos and done a bit of reading. Hopefully you guys can tell me if I'm on the right track for steps to take tomorrow. 1. Download Helios and the profile editor 2. Gonna download caploz a10c profile as a base 3. Edit my export config lua or copy and paste Helios lines? I'm assuming I can just replace my current export with one of the export.lua files and then just add my tacview and bios etc entries? 4. Do I need to do anything with my monitor or view config files like I did exporting MFCDs without Helios? And will I need to play around with the monitor and resolution in game as well? Or does the fact I'm using Helios make it totally separate from my main cockpit view? Anything else I'm missing? Any help or guidance would be greatly appreciated. I'm so excited to try this yet it seems a bit daunting. Regards Jason Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules Link to comment Share on other sites More sharing options...
Snacko Posted May 12, 2016 Share Posted May 12, 2016 (edited) I recommend using one of CaptZeen's Export.lua files. They are designed to support many Helios profiles data exports. Put it in your "C:\Users\yourname\Saved Games\DCS\Scripts" folder. And yes, you can add your Tacview lines at the bottom... Also, check out his profiles. They are all awesome!! http://captzeen.com/helios/downloads.asp BTW. You can download and set all of this up today if you want. Why wait? You don't need a touchscreen, just click with your mouse. If you have your MonitorSetup mfd exports all setup then you should be set to go. Do you know how to do that? Can you get all of the DCS export Windows working? But remember to open each profile that you download in the Helios Editor and on the Profile menu select 'Reset Monitors' to setup where Helios will put the profile. (The person who made the profile probably has his monitors laid out differently than you do.) Cheers! Edited May 12, 2016 by Snacko Intel I9-10850K (OC @ 5.0ghz) │ Asus Maximus XII Hero │ G.Skill Ripjaws 64GB (4x16GB) DDR4 3200 │ Thermaltake Water 360mm Gigabyte RTX 4090 Gaming OC 24gb │ 2TB M.2 EVO Pro; 1T M.2 EVO; Sandisk SSD Drives │ 49" Samsung Curved Widescreen │ 28" Touchscreen - ҉ - Blackshark Cockpit Trainer - ҉ - ♣ Thread | ♥ Download Link to comment Share on other sites More sharing options...
KIVI2015 Posted May 21, 2016 Share Posted May 21, 2016 HELIOS editor multi touch monitor installation problem Hi everybody, I am a beginner in Helios, while long time with DCS team. I have problem with installation of my fourth touch screen monitor Prolite T2252MTS - 1920x1080, as a origin tree monitors Benq XL2420T, 1920x108 installed on DCS, and work perfectly. I followed CapLoz, AND DerekM instructions being trying to install profile Loz SM v2.1 for A10C. My actions: - Configured 4 monitors in one line in Windows 10; - Installed Helios editor, and Helios Control center; - Install a Helios Profile (Loz SM v2.1) into D:\Users\YourName\Documents\Helios\Profiles - The images copied to the folder: users\YourName\Documents\Helios\Images - Started Helios Editor, four my monitors uppeared in Preview tab; - Opened Loz SM V2.1 profile; - did Reset Monitor - Started Helios Control Panel, and push START, immediately note appeared "" Can not display this profile basause invalid, Please open editor and select reset monitor"" , I did it several times, without RESULT. Does anybody have experience with 4monitors configuration in Helios ??? Please help with with this issue. Thank in advance P.S. Already spent one week without any success {SEE ATTACHED PHOTOS} KIVI Windows 10/64 | Intel® i7-3930K CPU 3.20Hz | 64GB Corsair Dominator 1600MHz DDR3| 2x GTX980 TI w/c | 3x BenQ XL2420T, 1920x1080 |1x IIYma T2252MTS 1920x1080 Multy Touch|TrackIR5 | TM HOTAS | Saitec Rudder Pedals | Link to comment Share on other sites More sharing options...
SGT Coyle Posted April 4, 2017 Share Posted April 4, 2017 Anyone still using this. I can't seem to get Helios to interact with game. Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
Fakum Posted April 4, 2017 Share Posted April 4, 2017 I am, its working just fine. Its been a very long time since I installed it and got it working though. Did you find any of the tutorials on Youtube? Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle Link to comment Share on other sites More sharing options...
JG14_Smil Posted April 5, 2017 Share Posted April 5, 2017 (edited) Old post, but if anyone else has trouble like KIVI2015, you must set monitor numbers when using the reset monitors. Windows monitor X = Helios monitor X, etc. 1 ,2 3 ,4 does not always equal 1,2,3,4. Fakum, Helios adds some code to the export file it sets up. It edits the old location of this file, located in the game build folders. Let Helios do that, then manually copy that file into a saved games\dcs\scrpits folder. You may have to create the scripts folder there. From then on, just move this export file to any DCS and it will work with Helios. Helios is great, but Ikarus out-performs it in many ways. Edited April 5, 2017 by JG14_Smil Link to comment Share on other sites More sharing options...
Fakum Posted April 5, 2017 Share Posted April 5, 2017 I do not have any questions, I was responding to SGT Coyle, but since you commented, what is "Ikarus" that you refer to? I never heard of it and Google search indicates its anti virus software??? Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle Link to comment Share on other sites More sharing options...
SGT Coyle Posted April 5, 2017 Share Posted April 5, 2017 OK, I've looked through these forums and youtube videos to adnausium. I set up my monitors (3 @ 27" 2k 2560x1440) as: Monitor1- Portrait @ 1440x2560 Monitor 2- Landscape @ 2560x1440 Monitor 3- Potrait @ 1440x2560 Combined res of 5140x2560 1. I've made and installed a Monitorsetup.lua Works for what I understand it's supposed to do. _ = function(p) return p; end; name = _('TripleTEST'); Description = 'TEST with LMFCD,Center,RMFCD, and CDU' Viewports = { Center = { x = 1441; y = 1125; width = 2560; height = 1440; viewDx = 0; viewDy = 0; aspect = 2560/1440; } } LEFT_MFCD = { x = 674; y = 1800; width = 650; height = 650; } RIGHT_MFCD = { x = 4125; y = 1800; width = 650; height = 650; } CDU_SCREEN = { x = 4860; y = 500; width = 530; height = 530; } UIMainView = Viewports.CenterI've got an Export.lua in C:\Users\xxxxxx\Saved Games\DCS\Scripts, generated by Helios v1.3.190 gHost = "127.0.0.1" gPort = 9089 gExportInterval = 0.067 gExportLowTickInterval = 1 gEveryFrameArguments = {[540]="%0.1f", [541]="%0.1f", [542]="%0.1f", [730]="%0.1f", [731]="%0.1f", [732]="%0.1f", [76]="%.4f", [77]="%.4f", [78]="%.4f", [80]="%.4f", [84]="%.4f", [85]="%.4f", [70]="%.4f", [73]="%.4f", [82]="%.4f", [83]="%.4f", [13]="%.4f", [14]="%.4f", [48]="%.4f", [12]="%.4f", [4]="%.4f", [55]="%0.1f", [17]="%.4f", [18]="%.4f", [24]="%.4f", [23]="%.4f", [25]="%0.1f", [19]="%0.1f", [26]="%0.1f", [20]="%.4f", [21]="%.4f", [27]="%.4f", [63]="%.4f", [64]="%.4f", [65]="%0.1f", [715]="%.4f", [40]="%0.1f", [32]="%0.1f", [46]="%0.1f", [34]="%.4f", [36]="%.4f", [47]="%.4f", [41]="%.4f", [33]="%.4f", [35]="%.4f", [662]="%0.1f", [663]="%0.1f", [665]="%0.1f", [664]="%0.1f", [215]="%0.1f", [216]="%0.1f", [217]="%0.1f", [404]="%0.1f", [372]="%0.1f", [373]="%0.1f", [374]="%0.1f", [654]="%1d", [659]="%0.1f", [660]="%0.1f", [661]="%0.1f", [737]="%0.1f", [653]="%.4f", [88]="%.4f", [89]="%.4f", [647]="%.4f", [648]="%.4f", [606]="%0.1f", [608]="%0.1f", [610]="%0.1f", [612]="%0.1f", [614]="%0.1f", [616]="%0.1f", [618]="%0.1f", [619]="%0.1f", [620]="%0.1f", [274]="%.4f", [604]="%.4f", [600]="%0.1f", [281]="%.4f", [289]="%1d", [480]="%0.1f", [481]="%0.1f", [482]="%0.1f", [483]="%0.1f", [484]="%0.1f", [485]="%0.1f", [486]="%0.1f", [487]="%0.1f", [488]="%0.1f", [489]="%0.1f", [490]="%0.1f", [491]="%0.1f", [492]="%0.1f", [493]="%0.1f", [494]="%0.1f", [495]="%0.1f", [496]="%0.1f", [497]="%0.1f", [498]="%0.1f", [499]="%0.1f", [500]="%0.1f", [501]="%0.1f", [502]="%0.1f", [503]="%0.1f", [504]="%0.1f", [505]="%0.1f", [506]="%0.1f", [507]="%0.1f", [508]="%0.1f", [509]="%0.1f", [510]="%0.1f", [511]="%0.1f", [512]="%0.1f", [513]="%0.1f", [514]="%0.1f", [515]="%0.1f", [516]="%0.1f", [517]="%0.1f", [518]="%0.1f", [519]="%0.1f", [520]="%0.1f", [521]="%0.1f", [522]="%0.1f", [523]="%0.1f", [524]="%0.1f", [525]="%0.1f", [526]="%0.1f", [527]="%0.1f", [260]="%0.1f", [269]="%.4f", [129]="%1d", [185]="%1d", [186]="%1d", [187]="%1d", [188]="%1d", [191]="%0.1f", [798]="%0.1f", [799]="%0.1f", [178]="%0.1f", [179]="%0.1f", [181]="%0.1f", [182]="%0.1f"} gArguments = {[22]="%.3f", [101]="%.1f", [102]="%1d", [103]="%1d", [104]="%1d", [105]="%1d", [300]="%.1f", [301]="%.1f", [302]="%.1f", [303]="%.1f", [304]="%.1f", [305]="%.1f", [306]="%.1f", [307]="%.1f", [308]="%.1f", [309]="%.1f", [310]="%.1f", [311]="%.1f", [312]="%.1f", [313]="%.1f", [314]="%.1f", [315]="%.1f", [316]="%.1f", [317]="%.1f", [318]="%.1f", [319]="%.1f", [320]="%1d", [321]="%1d", [322]="%1d", [323]="%1d", [324]="%1d", [325]="%0.1f", [326]="%.1f", [327]="%.1f", [328]="%.1f", [329]="%.1f", [330]="%.1f", [331]="%.1f", [332]="%.1f", [333]="%.1f", [334]="%.1f", [335]="%.1f", [336]="%.1f", [337]="%.1f", [338]="%.1f", [339]="%.1f", [340]="%.1f", [341]="%.1f", [342]="%.1f", [343]="%.1f", [344]="%.1f", [345]="%.1f", [346]="%1d", [347]="%1d", [348]="%1d", [349]="%1d", [350]="%1d", [351]="%0.1f", [385]="%.1f", [386]="%.1f", [387]="%.1f", [388]="%.1f", [389]="%.1f", [390]="%.1f", [391]="%.1f", [392]="%.1f", [393]="%.1f", [395]="%.1f", [396]="%.1f", [394]="%.1f", [397]="%.1f", [398]="%.1f", [399]="%.1f", [400]="%.1f", [401]="%.1f", [402]="%.1f", [405]="%1d", [406]="%1d", [407]="%1d", [408]="%1d", [409]="%1d", [531]="%.1f", [532]="%.1f", [533]="%.1f", [403]="%.1f", [365]="%.1f", [366]="%.1f", [369]="%.1f", [370]="%.1f", [371]="%.1f", [367]="%.3f", [368]="%.3f", [716]="%1d", [655]="%0.1f", [651]="%.1f", [375]="%0.1f", [376]="%0.1f", [377]="%0.1f", [378]="%1d", [379]="%0.1f", [380]="%1d", [381]="%1d", [382]="%1d", [383]="%1d", [384]="%0.1f", [645]="%0.1f", [646]="%.1f", [605]="%.1f", [607]="%.1f", [609]="%.1f", [611]="%.1f", [613]="%.1f", [615]="%.1f", [617]="%.1f", [621]="%1d", [711]="%.1f", [622]="%0.1f", [623]="%1d", [624]="%.3f", [626]="%.3f", [636]="%0.2f", [638]="%0.2f", [640]="%0.2f", [642]="%0.2f", [644]="%1d", [628]="%.1f", [630]="%.1f", [632]="%.1f", [634]="%.1f", [410]="%.1f", [411]="%.1f", [412]="%.1f", [413]="%.1f", [414]="%.1f", [415]="%.1f", [416]="%.1f", [417]="%.1f", [418]="%.1f", [419]="%.1f", [420]="%.1f", [421]="%.1f", [422]="%.1f", [423]="%.1f", [425]="%.1f", [426]="%.1f", [427]="%.1f", [428]="%.1f", [429]="%.1f", [430]="%.1f", [431]="%.1f", [432]="%.1f", [433]="%.1f", [434]="%.1f", [435]="%.1f", [436]="%.1f", [437]="%.1f", [438]="%.1f", [439]="%.1f", [440]="%.1f", [441]="%.1f", [442]="%.1f", [443]="%.1f", [444]="%.1f", [445]="%.1f", [446]="%.1f", [447]="%.1f", [448]="%.1f", [449]="%.1f", [450]="%.1f", [451]="%.1f", [452]="%.1f", [453]="%.1f", [454]="%.1f", [455]="%.1f", [456]="%.1f", [457]="%.1f", [458]="%.1f", [459]="%.1f", [460]="%.1f", [461]="%.1f", [462]="%.1f", [466]="%.1f", [467]="%.1f", [468]="%.1f", [470]="%.1f", [471]="%.1f", [424]="%1d", [463]="%1d", [469]="%1d", [472]="%1d", [241]="%1d", [242]="%1d", [243]="%1d", [244]="%1d", [245]="%1d", [246]="%1d", [601]="%1d", [602]="%1d", [603]="%1d", [712]="%0.2f", [352]="%.1f", [353]="%.1f", [354]="%.1f", [355]="%.1f", [356]="%1d", [357]="%.1f", [358]="%1d", [359]="%.3f", [360]="%0.1f", [361]="%0.1f", [362]="%0.1f", [363]="%0.1f", [364]="%0.1f", [275]="%.1f", [276]="%1d", [277]="%.3f", [278]="%1d", [279]="%1d", [280]="%1d", [282]="%1d", [283]="%1d", [284]="%.3f", [287]="%1d", [288]="%.3f", [290]="%.3f", [291]="%1d", [292]="%.3f", [293]="%.3f", [294]="%1d", [295]="%1d", [296]="%.3f", [297]="%.3f", [258]="%0.2f", [259]="%.1f", [261]="%.3f", [262]="%0.1f", [266]="%1d", [247]="%1d", [248]="%0.1f", [250]="%0.1f", [249]="%.3f", [251]="%0.1f", [252]="%0.1f", [270]="%1d", [273]="%1d", [272]="%1d", [271]="%.3f", [267]="%.1f", [268]="%.3f", [473]="%0.1f", [474]="%1d", [475]="%0.1f", [476]="%1d", [477]="%1d", [106]="%1d", [107]="%1d", [108]="%1d", [109]="%1d", [110]="%1d", [111]="%1d", [112]="%1d", [113]="%1d", [114]="%1d", [115]="%.1f", [117]="%1d", [118]="%1d", [119]="%1d", [120]="%1d", [121]="%1d", [116]="%.3f", [122]="%1d", [123]="%1d", [124]="%1d", [125]="%1d", [126]="%1d", [127]="%.1f", [132]="%1d", [131]="%.1f", [130]="%1d", [137]="%0.3f", [138]="%0.1f", [135]="%0.1f", [133]="%.3f", [136]="%.1f", [134]="%1d", [139]="%0.2f", [140]="%0.2f", [141]="%0.2f", [142]="%0.2f", [151]="%0.3f", [153]="%0.2f", [154]="%0.2f", [155]="%0.2f", [156]="%0.2f", [152]="%0.1f", [149]="%0.1f", [147]="%.3f", [150]="%.1f", [148]="%1d", [189]="%1d", [190]="%.1f", [192]="%.3f", [197]="%.1f", [196]="%1d", [193]="%.3f", [195]="%.3f", [194]="%0.1f", [198]="%.1f", [161]="%0.2f", [162]="%0.1f", [163]="%0.2f", [164]="%0.2f", [165]="%0.2f", [166]="%0.2f", [167]="%0.1f", [168]="%0.1f", [169]="%1d", [170]="%1d", [171]="%.3f", [172]="%.1f", [173]="%.1f", [735]="%.1f", [734]="%1d", [779]="%1d", [778]="%1d", [780]="%1d", [781]="%0.1f", [782]="%0.1f", [783]="%0.1f", [784]="%1d", [772]="%1d", [199]="%0.1f", [200]="%0.1f", [201]="%1d", [202]="%1d", [203]="%1d", [204]="%1d", [205]="%1d", [206]="%1d", [207]="%1d", [208]="%1d", [209]="%0.2f", [210]="%0.2f", [211]="%0.2f", [212]="%0.2f", [213]="%0.2f", [214]="%0.2f", [174]="%1d", [175]="%1d", [176]="%0.1f", [177]="%1d", [180]="%1d", [183]="%1d", [184]="%1d", [221]="%.3f", [222]="%1d", [223]="%.3f", [224]="%1d", [225]="%.3f", [226]="%1d", [227]="%.3f", [228]="%1d", [229]="%.3f", [230]="%1d", [231]="%.3f", [232]="%1d", [233]="%.3f", [234]="%1d", [235]="%.3f", [236]="%1d", [237]="%1d", [238]="%.3f", [239]="%0.1f", [240]="%.1f", [704]="%.3f", [705]="%.3f", [718]="%1d", [722]="%.1f", [733]="%1d"} function ProcessHighImportance(mainPanelDevice) -- Send Altimeter Values SendData(2051, string.format("%0.4f;%0.4f;%0.5f", mainPanelDevice:get_argument_value(52), mainPanelDevice:get_argument_value(53), mainPanelDevice:get_argument_value(51))) SendData(2059, string.format("%0.2f;%0.2f;%0.2f;%0.3f", mainPanelDevice:get_argument_value(56), mainPanelDevice:get_argument_value(57), mainPanelDevice:get_argument_value(58), mainPanelDevice:get_argument_value(59))) -- Calcuate HSI Value SendData(2029, string.format("%0.2f;%0.2f;%0.4f", mainPanelDevice:get_argument_value(29), mainPanelDevice:get_argument_value(30), mainPanelDevice:get_argument_value(31))) -- Calculate Total Fuel SendData(2090, string.format("%0.2f;%0.2f;%0.5f", mainPanelDevice:get_argument_value(90), mainPanelDevice:get_argument_value(91), mainPanelDevice:get_argument_value(92))) end function ProcessLowImportance(mainPanelDevice) -- Get Radio Frequencies local lUHFRadio = GetDevice(54) SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- ILS Frequency --SendData(2251, string.format("%0.1f;%0.1f", mainPanelDevice:get_argument_value(251), mainPanelDevice:get_argument_value(252))) -- TACAN Channel SendData(2263, string.format("%0.2f;%0.2f;%0.2f", mainPanelDevice:get_argument_value(263), mainPanelDevice:get_argument_value(264), mainPanelDevice:get_argument_value(265))) end os.setlocale("ISO-8559-1", "numeric") -- Simulation id gSimID = string.format("%08x*",os.time()) -- State data for export gPacketSize = 0 gSendStrings = {} gLastData = {} -- Frame counter for non important data gTickCount = 0 -- DCS Export Functions function LuaExportStart() -- Works once just before mission start. -- 2) Setup udp sockets to talk to helios package.path = package.path..";.\\LuaSocket\\?.lua" package.cpath = package.cpath..";.\\LuaSocket\\?.dll" socket = require("socket") c = socket.udp() c:setsockname("*", 0) c:setoption('broadcast', true) c:settimeout(.001) -- set the timeout for reading the socket end function LuaExportBeforeNextFrame() ProcessInput() end function LuaExportAfterNextFrame() end function LuaExportStop() -- Works once just after mission stop. c:close() end function ProcessInput() local lInput = c:receive() local lCommand, lCommandArgs, lDevice, lArgument, lLastValue if lInput then lCommand = string.sub(lInput,1,1) if lCommand == "R" then ResetChangeValues() end if (lCommand == "C") then lCommandArgs = StrSplit(string.sub(lInput,2),",") lDevice = GetDevice(lCommandArgs[1]) if type(lDevice) == "table" then lDevice:performClickableAction(lCommandArgs[2],lCommandArgs[3]) end end end end function LuaExportActivityNextEvent(t) t = t + gExportInterval gTickCount = gTickCount + 1 local lDevice = GetDevice(0) if type(lDevice) == "table" then lDevice:update_arguments() ProcessArguments(lDevice, gEveryFrameArguments) ProcessHighImportance(lDevice) if gTickCount >= gExportLowTickInterval then ProcessArguments(lDevice, gArguments) ProcessLowImportance(lDevice) gTickCount = 0 end FlushData() end return t end -- Helper Functions function StrSplit(str, delim, maxNb) -- Eliminate bad cases... if string.find(str, delim) == nil then return { str } end if maxNb == nil or maxNb < 1 then maxNb = 0 -- No limit end local result = {} local pat = "(.-)" .. delim .. "()" local nb = 0 local lastPos for part, pos in string.gfind(str, pat) do nb = nb + 1 result[nb] = part lastPos = pos if nb == maxNb then break end end -- Handle the last field if nb ~= maxNb then result[nb + 1] = string.sub(str, lastPos) end return result end function round(num, idp) local mult = 10^(idp or 0) return math.floor(num * mult + 0.5) / mult end -- Status Gathering Functions function ProcessArguments(device, arguments) local lArgument , lFormat , lArgumentValue for lArgument, lFormat in pairs(arguments) do lArgumentValue = string.format(lFormat,device:get_argument_value(lArgument)) SendData(lArgument, lArgumentValue) end end -- Network Functions function SendData(id, value) if string.len(value) > 3 and value == string.sub("-0.00000000",1, string.len(value)) then value = value:sub(2) end if gLastData[id] == nil or gLastData[id] ~= value then local data = id .. "=" .. value local dataLen = string.len(data) if dataLen + gPacketSize > 576 then FlushData() end table.insert(gSendStrings, data) gLastData[id] = value gPacketSize = gPacketSize + dataLen + 1 end end function FlushData() if #gSendStrings > 0 then local packet = gSimID .. table.concat(gSendStrings, ":") .. "\n" socket.try(c:sendto(packet, gHost, gPort)) gSendStrings = {} gPacketSize = 0 end end function ResetChangeValues() gLastData = {} gTickCount = 10 end Any help would be appreciated. p.s. I've tried several different export.lua, profiles. I don't know if it means anything, but my Helios monitor setup doesn't match how my monitors are setup. My monitors are setup 1,2,3 and Helios says 1,3,2 Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
cichlidfan Posted April 5, 2017 Share Posted April 5, 2017 what is "Ikarus" that you refer to? https://forums.eagle.ru/showthread.php?t=179525 ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup: Link to comment Share on other sites More sharing options...
Fakum Posted April 5, 2017 Share Posted April 5, 2017 Thanks cichlidfan :} SGT Coyle, I was under he impression that you simply did not like how the text in the MFCD's were aligning with the OSB buttons. In which case I would have advised you to tinker with resizing of the MFCD exporting size to better align with the Helios OSB's. If you issue is beyond that, i dont think I can help, especially with 3 monitors and what has already been suggested here? its been many years since I changed anything, I am not proficient at all at this time as I once was sorry to say. Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle Link to comment Share on other sites More sharing options...
SGT Coyle Posted April 5, 2017 Share Posted April 5, 2017 export.lua had a bug. https://forums.eagle.ru/showpost.php?p=3007377&postcount=3 commented out that line and now the neddle move and buttons work Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
raymondabel Posted April 6, 2017 Share Posted April 6, 2017 allo not sure it is the "right place" to ask this Helios (used with Steam A-10) worked perfeclyfor a long time then suddenly, Helios does not stay "on top" and during the game it swap back and on top. I have the last version, Thansk for your time Link to comment Share on other sites More sharing options...
chester2175 Posted November 20, 2017 Share Posted November 20, 2017 Helios Monitor Problem I am very new to Helios. I have installed the Loz profile, and when testing the profile only about 30% of the panel is visible on the bottom right corner. The rest is completely missing. I then built my own panel, and it does the same thing. Does anyone have any ideas? Thanks, Chad Link to comment Share on other sites More sharing options...
Capt Zeen Posted November 20, 2017 Share Posted November 20, 2017 I am very new to Helios. I have installed the Loz profile, and when testing the profile only about 30% of the panel is visible on the bottom right corner. The rest is completely missing. I then built my own panel, and it does the same thing. Does anyone have any ideas? Thanks, Chad upload a screenshot of your screen, to see the problem Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
geebeer2 Posted November 21, 2017 Share Posted November 21, 2017 F5-E Profile Hi, is there a possibility in a near future to have the profile for F5-E? best regards Dan Link to comment Share on other sites More sharing options...
chester2175 Posted November 21, 2017 Share Posted November 21, 2017 Helios Monitor Problem Here is a shot. Link to comment Share on other sites More sharing options...
Fakum Posted November 21, 2017 Share Posted November 21, 2017 Sorry to say, but I have never seen that before! I have no idea how that can be? I would start from scratch if it were me, but it seems you have already done that? How many monitors do you have? It would probably help if you post up your monitor config file and monitor resolution configuration for starters I suppose. Take a screenshot of your desktop display config as well. Gotta start with some basics. Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle Link to comment Share on other sites More sharing options...
Capt Zeen Posted November 22, 2017 Share Posted November 22, 2017 Thats weird! Send me your profile, so i can take a look inside. Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
Capt Zeen Posted November 22, 2017 Share Posted November 22, 2017 Hi, is there a possibility in a near future to have the profile for F5-E? best regards Dan I just finished the L39ZA profile, it will be pubished in a couple of days. I am going to start a new one, but not sure witch one. Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
chester2175 Posted November 22, 2017 Share Posted November 22, 2017 Helios Monitor Problem I have two monitors, a virtual monitor, 2 ipads, and a tablet. Im running icontrol dcs on the ipads, and tablet. Could it be an issue between icontrol dcs, and helios? Im not very familiar with the monitor config. Link to comment Share on other sites More sharing options...
Capt Zeen Posted November 22, 2017 Share Posted November 22, 2017 I have two monitors, a virtual monitor, 2 ipads, and a tablet. Im running icontrol dcs on the ipads, and tablet. Could it be an issue between icontrol dcs, and helios? Im not very familiar with the monitor config. Yes, probably thats the problem. Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
White_Wolf_PL Posted November 22, 2017 Share Posted November 22, 2017 I just finished the L39ZA profile, it will be pubished in a couple of days. I am going to start a new one, but not sure witch one. You have only one choice - RASBAM AV8/B N/A :thumbup: Link to comment Share on other sites More sharing options...
chester2175 Posted November 22, 2017 Share Posted November 22, 2017 Helios Monitor Questions Here is my monitor config. Do I have to add another script for the second monitor?A-10C Virtual Cockpit Server.lua Link to comment Share on other sites More sharing options...
jamesb Posted January 21, 2018 Share Posted January 21, 2018 Fix for tacan as ILS? Has there been a fix for the TACAN and ILS in Helios? I have a bodnar card and using Helios to program it. But the only things not working are those panels Link to comment Share on other sites More sharing options...
Recommended Posts