Jump to content

Bus port in blackbox


horus-DCS

Recommended Posts

This is for connect other VKB device - to be developed, I guess, e.g. their TECS throttle.

 

You can't plug pot and switches there, VKB bus code is proprietary, not an analog or serial (Shift Register) code.

 

I would hope they would have a separate connector for the Throttle, if they utilized plugging it into the Black Box, would the limitation of axis and buttons come into play?

Don B

EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|

Link to comment
Share on other sites

That will be used to link multiple blackbox units together. The throttle unit will have multiple extensions so that these units will be linked and connected to one single USB port on the PC.

 

 

These ports are definitely not to be used with other 3rd party boards.

Romanian Community for DCS World

HW Specs: AMD 7900X, 64GB RAM, RTX 4090, HOTAS Virpil, MFG, CLS-E, custom

Link to comment
Share on other sites

I would hope they would have a separate connector for the Throttle, if they utilized plugging it into the Black Box, would the limitation of axis and buttons come into play?

 

TECS is an standalone controller, but VKB bus (in theory) allow plug then and stick, pedal in one Black Box. An optional feature.

 

In the past this was used in Mambas allowing plug in their base Logitech G-940 throttle.

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...