agentdarnell Posted August 11, 2019 Share Posted August 11, 2019 (edited) So the f-14 has started crashing every time I try and load into the game. The other modules work fine and its just the f-14. Say I load free flight it loads almost all the way then crashes. Same thing with custom scenarios. It worked till this week. Edited August 14, 2019 by IronMike [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
RaisedByWolves Posted August 11, 2019 Share Posted August 11, 2019 Did you try doing a repair? Link to comment Share on other sites More sharing options...
agentdarnell Posted August 11, 2019 Author Share Posted August 11, 2019 (edited) Did you try doing a repair? I have uninstalled the f-14 and reinstalled. Its not the dcs as its only the f-14 doing it. Can I just repair the f-14 or delete all files for the f-14 when uninstall it and redownload them? Edit I just did a repair and it is still crashing with just the f-14. Edited August 11, 2019 by agentdarnell [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
draconus Posted August 12, 2019 Share Posted August 12, 2019 Please attach dcs.log and try with clean profile. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 Please attach dcs.log and try with clean profile. What do you mean by clean profile? Here is the logdcs log.txt [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
draconus Posted August 13, 2019 Share Posted August 13, 2019 What do you mean by clean profile? Just temporarily rename the folder: C:\Users\<User Name>\Saved Games\DCS OpenBeta Run the game, it will start with new config. If it works ok with new profile then it was something in your configs (added or modified files). If not I suggest to contact support. https://www.digitalcombatsimulator.com/en/support/faq/710/ https://www.digitalcombatsimulator.com/en/support/faq/556/ After clean/repair - did you run the updater? (you should) Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 (edited) Just temporarily rename the folder: C:\Users\<User Name>\Saved Games\DCS OpenBeta Run the game, it will start with new config. If it works ok with new profile then it was something in your configs (added or modified files). If not I suggest to contact support. https://www.digitalcombatsimulator.com/en/support/faq/710/ https://www.digitalcombatsimulator.com/en/support/faq/556/ After clean/repair - did you run the updater? (you should) Yes ran the updater. I also switched back to the stable version and it still crashed when loading the f-14. I played every other module without an issue. I am switching back to open beta now and will try to do a clean profile. Edit. I tried what you suggested and still crashes just with the f-14 module. I have most of the modules and only the f-14 has problems with crashing. Edited August 13, 2019 by agentdarnell [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
draconus Posted August 13, 2019 Share Posted August 13, 2019 How do you test? Is it specific mission you try to run all the time? System specs? Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 How do you test? Is it specific mission you try to run all the time? System specs? So far its any quick mission I try to load or any custom I try to load. Say I try free flight in the Persian Gulf or in Caucasus, takeoff from anywhere, even creating my own. I can pull up any other module and it works but always crashes with the f-14. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
draconus Posted August 13, 2019 Share Posted August 13, 2019 I asked for system specifications as my last idea is to make sure you have big enough swap file, ex. 32GB and also try low graphics settings. Please contact support team. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
IronMike Posted August 13, 2019 Share Posted August 13, 2019 Hi, sorry I did not answer you earlier. Yes, could you please share more information. Since this is a single, isolated issue, it strongly suggests that something on your side might not be coping with the F-14 well or that you suffer from a corrupt install in which case it is best to remove all F-14 related folders (also inputs), and run a repair. But it is very hard to tell on that little info. Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 Hi, sorry I did not answer you earlier. Yes, could you please share more information. Since this is a single, isolated issue, it strongly suggests that something on your side might not be coping with the F-14 well or that you suffer from a corrupt install in which case it is best to remove all F-14 related folders (also inputs), and run a repair. But it is very hard to tell on that little info. I had attached my log. I will try and do an uninstall and find the f-14 folder and delete everything. It was working till the last update [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
IronMike Posted August 13, 2019 Share Posted August 13, 2019 I had attached my log. I will try and do an uninstall and find the f-14 folder and delete everything. It was working till the last update Oh, my sincere apologies, I overlooked that reply. I just forwarded your log to our devs, we will take a look if it reveals something. Would you mind sharing your full system specs, too, please? Thanks! Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 Running an Intel xeon hex core, 24 gigs ram, sli GTX 1070, think I have around 200 gigs free on this hard drive. I might swap it over to my games drive as there is around 2tb of space. Running a 1440p 27" monitor. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
IronMike Posted August 13, 2019 Share Posted August 13, 2019 Running an Intel xeon hex core, 24 gigs ram, sli GTX 1070, think I have around 200 gigs free on this hard drive. I might swap it over to my games drive as there is around 2tb of space. Running a 1440p 27" monitor. Thanks, your specs should not be the problem. Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 (edited) OK I have uninstalled it again, deleted the folder for the f-14, ran a clean, and re-downloading the f-14 now and will reinstall it. I will update here and if crashes again include the log. Now that I reinstalled it it says need module for load mission f-14b Edited August 13, 2019 by agentdarnell [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
agentdarnell Posted August 13, 2019 Author Share Posted August 13, 2019 OK after uninstalling, deleting the f-14 folder, reinstalling and running a repair it seems to be working. I was able to pull up free flight in Caucus map. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
draconus Posted August 14, 2019 Share Posted August 14, 2019 OK after uninstalling, deleting the f-14 folder, reinstalling and running a repair it seems to be working. I was able to pull up free flight in Caucus map. :thumbup: Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
IronMike Posted August 14, 2019 Share Posted August 14, 2019 OK after uninstalling, deleting the f-14 folder, reinstalling and running a repair it seems to be working. I was able to pull up free flight in Caucus map. Awesome that is great news, it spares me to tell you that the log did not indicate anything to what have caused it, in that sense even better that you got it fixed! I wish you lots of fun with it! :) Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
draconus Posted August 15, 2019 Share Posted August 15, 2019 Awesome that is great news, it spares me to tell you that the log did not indicate anything to what have caused it... What about DCS and module version mismatch? Is it normal? Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
IronMike Posted August 15, 2019 Share Posted August 15, 2019 What about DCS and module version mismatch? Is it normal? yeah, nothing in the log pointed to a reason for a crash. Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
Recommended Posts