Pesanta Posted May 19, 2019 Share Posted May 19, 2019 When flying the A-10C, I have to constantly push my nose down, regardless of load or trim. This is not the case for the F/A-18. I cannot figure out why, and it's driving me crazy. I've re-configured my joystick, installed and re-installed drivers, and trolled the forums. Nothing seems to work. Can someone help me out here? Linked below are screenshots of the axis view window for both the A-10C and F-18 after following proper cold start procedure. (I was not giving any imput to the joystick when these shots were captured, and they were captured directly one after another) https://imgur.com/a/LozufKq Any help would be greatly appreciated. Operating System Windows 10 Pro 64-bit CPU Intel Core i5 7600K @ 3.80GHz 56 °C RAM 16.0GB Single-Channel @ 1063MHz (15-15-15-36) Motherboard ASUSTeK COMPUTER INC. STRIX H270F GAMING Graphics ZOWIE XL LCD (2560x1440@59Hz) 4095MB NVIDIA GeForce GTX 1080 (EVGA) Storage: 238GB TOSHIBA KSG60ZMV256G M.2 2280 256GB (SATA) 465GB Western Digital 1863GB Western Digital (SATA) Link to comment Share on other sites More sharing options...
Darcwaynard Posted May 19, 2019 Share Posted May 19, 2019 F-18C has a way more stable FBW system than A-10C. Is your speed constant in the A-10 during this observation? You need to trim nose down as your speed increases and trim up as it decreases. Sent from my SM-A530W using Tapatalk [sIGPIC][/sIGPIC] Amd Fx 8350 4.3 GHz - MSi Gtx 1060 6gb - 16gb DDR3 A-10C - AV8B - F-5E - Mig-21 - FC3 - CA - UH-1H - Black Shark - AJ3-37 - M-2000C - F-16C Viper - F-86F - Spitfire - Fw-190 - F/A-18C - F-14 - Normandy - NTTR - Persian Gulf Link to comment Share on other sites More sharing options...
Pesanta Posted May 20, 2019 Author Share Posted May 20, 2019 Thank you for the reply! Yes, I am trimming as speed increases. The required amount of nose down input for level flight is (mostly) constant. Small variations need to be made for the increase in speed, but even directly after rotation, I need to push my nose down a significant amount just to maintain level flight. Pictured at link is centered, level, and maximum travel for stick. https://imgur.com/a/2UUlv05 Operating System Windows 10 Pro 64-bit CPU Intel Core i5 7600K @ 3.80GHz 56 °C RAM 16.0GB Single-Channel @ 1063MHz (15-15-15-36) Motherboard ASUSTeK COMPUTER INC. STRIX H270F GAMING Graphics ZOWIE XL LCD (2560x1440@59Hz) 4095MB NVIDIA GeForce GTX 1080 (EVGA) Storage: 238GB TOSHIBA KSG60ZMV256G M.2 2280 256GB (SATA) 465GB Western Digital 1863GB Western Digital (SATA) Link to comment Share on other sites More sharing options...
Aries Posted January 19, 2020 Share Posted January 19, 2020 I have same problem... In A-10C it pulls back... (stick is actually in center position but sim reports it pulled back like on your screenshot). On Hornet at the same time is also centered, like in your screenshot... Did you solve this? :wallbash: [sIGPIC][/sIGPIC] ...the few, the proud, the remaining... Link to comment Share on other sites More sharing options...
Aries Posted January 20, 2020 Share Posted January 20, 2020 Solved! Logitech G25 wheel throttle axis (from pedal) autobound itself to pitch axis in A-10C DCS... Removed it in axis configuration and all is fine... [sIGPIC][/sIGPIC] ...the few, the proud, the remaining... Link to comment Share on other sites More sharing options...
alphap8 Posted July 26, 2020 Share Posted July 26, 2020 Solved! Logitech G25 wheel throttle axis (from pedal) autobound itself to pitch axis in A-10C DCS... Removed it in axis configuration and all is fine... You're great! You solved it for me too! I had the same problem and have a G920 wheel+pedals. Thanks!:cheer3nc: Link to comment Share on other sites More sharing options...
Flappie Posted July 26, 2020 Share Posted July 26, 2020 Well done, and thanks for the feedback, guys. :) Don't accept indie game testing requests from friends in Discord. Ever. Link to comment Share on other sites More sharing options...
Recommended Posts