Lobinjaevel Posted June 29, 2017 Share Posted June 29, 2017 Recieved my collective base a couple of days ago, mounted it earlier today. Great quality and feel, very nice size also, I 3d printed a mount for mine so it very discrete. Might have missed it, but I have a couple of questions as I've not found a "manual". How do I adjust the angles? Is it just with the bar that's below the axis? How do I calibrate the sensor? Calibrating in windows did nothing and mine is off quite a bit, starts at 20-30% and goes up to 100% but then down again to 85%. Regards Robin Link to comment Share on other sites More sharing options...
Chic Posted June 30, 2017 Share Posted June 30, 2017 (edited) :music_whistling: I changed my mind..... [ATTACH]165121[/ATTACH] So the stick-tube has 30mm more length. And I think the sticktube and the enclosure can be covered with a stick leather boot.:pilotfly: Yes Yogi, added length on stick is a very good idea. Remember, total length no greater than 62 cm. Not sure how the boot would work. Maybe I'll install Plexiglas windows! I appreciate your effort and care to make this work. Edited June 30, 2017 by Chic A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
yogi149 Posted June 30, 2017 Share Posted June 30, 2017 Yes Yogi, added length on stick is a very good idea. Remember, total length no greater than 62 cm. Not sure how the boot would work. Maybe I'll install Plexiglas windows! I appreciate your effort and care to make this work. I can make some carbon-fiber inlays.:music_whistling: But I think the leather boot looks better. for those who cannot use the sensors directly, for the Bodnar board exist the DIView tool. Which is linked in the shop in the board description.:music_whistling: And here too: DIView . regards / gruesse yogi Link to comment Share on other sites More sharing options...
Chic Posted June 30, 2017 Share Posted June 30, 2017 I can make some carbon-fiber inlays.:music_whistling: But I think the leather boot looks better. OK. Would provide better dust and debris protection as well. BTW. I think the surface mount option will be popular as many sims are not mounted on decks. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
yogi149 Posted June 30, 2017 Share Posted June 30, 2017 Hi Chic, can you checkout, whether it fits? We will design a boot for you too.:music_whistling: regards / gruesse yogi Link to comment Share on other sites More sharing options...
TripRodriguez Posted July 1, 2017 Author Share Posted July 1, 2017 (edited) It's so good to have you back Yogi, you are an amazing asset to the community! Also FU Photobucket! I'll have to move all my images over to IMGUR and link them all again.... like I need more work to add to my list! Edited July 1, 2017 by TripRodriguez [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim: Link to comment Share on other sites More sharing options...
Chic Posted July 1, 2017 Share Posted July 1, 2017 Hi Chic, can you checkout, whether it fits? [ATTACH]165149[/ATTACH] We will design a boot for you too.:music_whistling: Perfect! A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
Mr.Fenestron Posted July 1, 2017 Share Posted July 1, 2017 I think I'd like the leather boot. It just looks so natural. Link to comment Share on other sites More sharing options...
yogi149 Posted July 1, 2017 Share Posted July 1, 2017 Hi, this is what my wife made for my EC-120 simpit today: regards / gruesse yogi Link to comment Share on other sites More sharing options...
Mr.Fenestron Posted July 1, 2017 Share Posted July 1, 2017 Dibs on your platform and chair! Haha. That cyclic covers looks really good Yogi, it near matches your chair color and IIRC you said orange was your favorite color. Link to comment Share on other sites More sharing options...
Chic Posted July 2, 2017 Share Posted July 2, 2017 Hi, this is what my wife made for my EC-120 simpit today: [ATTACH]165260[/ATTACH] Yogi, that looks good on the cyclic but I have some concern that the boot may effect the sensitivity and feel on the collective. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
TripRodriguez Posted July 2, 2017 Author Share Posted July 2, 2017 Yogi, What do you think about designing a cyclic friction device like on a real Huey cyclic? The new VKB Gunfighter has a friction device as well, but I think that one requires some disassembly to adjust. [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim: Link to comment Share on other sites More sharing options...
yogi149 Posted July 2, 2017 Share Posted July 2, 2017 Hi Trip, what do you want to achieve with it? I thaught that this function is for parking only. regards / gruesse yogi Link to comment Share on other sites More sharing options...
yogi149 Posted July 2, 2017 Share Posted July 2, 2017 Hi Chic, Yogi, that looks good on the cyclic but I have some concern that the boot may effect the sensitivity and feel on the collective. the material we use for my cyclic boot isn't strong enough to make a perceptible influence. it is only a thin synthetic leather. We have black and silver shining to make the collective boot. regards / gruesse yogi Link to comment Share on other sites More sharing options...
TripRodriguez Posted July 2, 2017 Author Share Posted July 2, 2017 Yeah it's probably not very important to most people but I'd like it for use during startup and shutdown procedures to keep the stick from falling over. I will probably just rig up something simple and cheap myself but I know you like ideas for features to develop and this would be a sweet little added feature for your Huey stick. =D The leather boot looks great! I'd love a set of those myself. Any progress on the Force Trim? For now I actually only need Mag Brake since I'm focusing on the Huey, but I imagine eventually I'd want the incremental trim function as well. [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim: Link to comment Share on other sites More sharing options...
yogi149 Posted July 2, 2017 Share Posted July 2, 2017 Hi Trip, a you sure that someone uses the friction, just above the floor, when starting and slowing down the rotor???:huh: The FTR makes this function additionally when activated.:music_whistling: regards / gruesse yogi Link to comment Share on other sites More sharing options...
TripRodriguez Posted July 2, 2017 Author Share Posted July 2, 2017 This is true. Yogi, I'm sending a PM. I want to buy pedals if I can afford. =D [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim: Link to comment Share on other sites More sharing options...
Mr.Fenestron Posted July 2, 2017 Share Posted July 2, 2017 Are the new improved pedals ready? Link to comment Share on other sites More sharing options...
Chic Posted July 2, 2017 Share Posted July 2, 2017 Hi Chic, the material we use for my cyclic boot isn't strong enough to make a perceptible influence. it is only a thin synthetic leather. We have black and silver shining to make the collective boot. Make mine black plase. Will also take the plastic inlays so I have the option. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
yogi149 Posted July 4, 2017 Share Posted July 4, 2017 Hi, some impressions.:music_whistling: regards / gruesse yogi Link to comment Share on other sites More sharing options...
TripRodriguez Posted July 4, 2017 Author Share Posted July 4, 2017 Beautiful Yogi! Can you tell us anything about force trim module progress? [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim: Link to comment Share on other sites More sharing options...
Mr.Fenestron Posted July 4, 2017 Share Posted July 4, 2017 That looks great Yogi! I like how you left the box open to see the mechanical actuation. Is this the same method you plan to use on your mounting system or something completely different? Link to comment Share on other sites More sharing options...
Chic Posted July 5, 2017 Share Posted July 5, 2017 Hi, some impressions.:music_whistling: [ATTACH]165360[/ATTACH] [ATTACH]165361[/ATTACH] [ATTACH]165362[/ATTACH] [ATTACH]165363[/ATTACH] Very nice !! Compliments to your wife. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
yogi149 Posted July 10, 2017 Share Posted July 10, 2017 Hi, today we got a cyclic grip from CH-53. Can someone tell a productname to me? Is it a variation of the B-8 grip? We will design the upper part and join it to our B-8 grip and offer this cyclic grip as changeable configuration for our UH-stick. The intercom-button seems to be with two directions: down for intercom "IC" and up for "PT". What does "PT" mean?:huh: External com? regards / gruesse yogi Link to comment Share on other sites More sharing options...
heloguy Posted July 10, 2017 Share Posted July 10, 2017 (edited) Hi, today we got a cyclic grip from CH-53. Can someone tell a productname to me? Is it a variation of the B-8 grip? [ATTACH]165597[/ATTACH] [ATTACH]165598[/ATTACH] We will design the upper part and join it to our B-8 grip and offer this cyclic grip as changeable configuration for our UH-stick. [ATTACH]165599[/ATTACH] The intercom-button seems to be with two directions: down for intercom "IC" and up for "PT". What does "PT" mean?:huh: External com? I used to fix H-53s, so as far as I can remember, it is the same grip as in the H-60, which I fly as a pilot. It is a B8 grip, just with the buttons wired up for what is required in those helicopters. While I'm not sure exactly what the abbreviations mean, up, or IC, is for the ICS, or Internal Communication System. Basically, it only talks inside the helicopter to the crew. PT transmits on whatever radio is selected (maybe it stands for Primary Transmitter or Transmission). Anyway, that one is for talking outside the helicopter. Edit: Just noticed from your description, and picture, the switch is backwards from what is in the H60. Not sure why that is, but I'm sure they work the same, even if reversed. Edited July 11, 2017 by heloguy i9 12900k @ 4.9ghz, 32gb RAM Nvidia RTX 3090 Windows 11 x64 Valve Index Brunner CLS-E w/RS F16GRH, Virpil TCS Rotor Plus Collective, BRD F1 Pedals, WH Throttle, FSSB R3 w/WH Grip, PointCTRL v1 Link to comment Share on other sites More sharing options...
Recommended Posts