kramfiftysix Posted May 31, 2015 Share Posted May 31, 2015 Guys I'm really struggling with the communications with the tower and after reading many posts I've come to the conclusion that I'm dumb ! I'm taking off from Vaziani, the wave number 188 is pre-set on both the Receiver and the transmitter. I check the antenna has the maximum reception and I flip the switch from arc to radio. I press the button on the throttle and .... nothing ? In the mission editor I've set the comm to 4.7mhz but that doesn't seem to help :( Can anyone give me a nudge in the right direction ? Thankyou Link to comment Share on other sites More sharing options...
Art-J Posted May 31, 2015 Share Posted May 31, 2015 (edited) Note that tuning receiver automatically tunes the transmitter as well. Also, flipping the ARC/radio switch is not necessary. "Nothing" as completely nothing, or nothing audible, but the writing in top left corner appears? The latter indicates the wave number has not been set precisely enough, the former... well, something's amiss :). Edit: - Vaziani, huh? This is how it works here:radio.trk Edited May 31, 2015 by Art-J Track attachment. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
kramfiftysix Posted May 31, 2015 Author Share Posted May 31, 2015 Thanks for your quick response Art-J, I watched your track and then tried to duplicate it but, I get nothing. The receiver and transmitter are on the correct channel but when I press the button on the throttle the menu does not appear ? Any ideas ? Link to comment Share on other sites More sharing options...
uboats Posted May 31, 2015 Share Posted May 31, 2015 Try to build a new mission from scratch. And also try ralt+\ [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn | Link to comment Share on other sites More sharing options...
Art-J Posted May 31, 2015 Share Posted May 31, 2015 Yep, sounds like a key/button assignment problem. If I recall correctly MiG, like F-86 has only one radio command, don't remember whether it's "\" or "Alt+\" by default. Reassign it to anything You want and try again. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
Pikey Posted May 31, 2015 Share Posted May 31, 2015 I had this, I was using Aries plugin and it messes with all this. Probably not applicable but worth mentioning as it's a popular issue. ___________________________________________________________________________ SIMPLE SCENERY SAVING * SIMPLE GROUP SAVING * SIMPLE STATIC SAVING * Link to comment Share on other sites More sharing options...
kramfiftysix Posted May 31, 2015 Author Share Posted May 31, 2015 I've created a new mission and I've bound the action to different joystick button, but with the same result. In the control options menu there are two alternatives; Communications menu - which works fine, and Microphone button - this is the one that doesn't appear to work, I've bound it to a button on my joystick and when I press it I can see the button on the throttle go in and out. However it doesn't call up a menu. Any thoughts ? Link to comment Share on other sites More sharing options...
Nevyn Posted June 3, 2015 Share Posted June 3, 2015 I've created a new mission and I've bound the action to different joystick button, but with the same result. In the control options menu there are two alternatives; Communications menu - which works fine, and Microphone button - this is the one that doesn't appear to work, I've bound it to a button on my joystick and when I press it I can see the button on the throttle go in and out. However it doesn't call up a menu. Any thoughts ? Do you have easy comms enabled in the options, that may be the problem, although thats just a wild guess. Link to comment Share on other sites More sharing options...
kramfiftysix Posted June 3, 2015 Author Share Posted June 3, 2015 Perfect ! Thanks Nevyn :thumbup: Link to comment Share on other sites More sharing options...
mjmorrow Posted June 20, 2015 Share Posted June 20, 2015 I don't have a problem contacting the tower when I start up and take off. I did notice that I can't contact the tower when I want to get permission to land. [sIGPIC]http://i688.photobucket.com/albums/vv250/mjmorrow76/SPAD%20of%20a%20new%20generation_zpshcbftpce.png[/sIGPIC] Link to comment Share on other sites More sharing options...
kramfiftysix Posted June 21, 2015 Author Share Posted June 21, 2015 Yeah, they only give me permission when I'm on finals :( Link to comment Share on other sites More sharing options...
Nevyn Posted June 21, 2015 Share Posted June 21, 2015 Yeah, they only give me permission when I'm on finals :( The only time I don't get permission to land immediately is if there is other air traffic floating around the airfield, when that happens I just go into a traffic pattern until the ATC tells me I am good to go. Not sure how relevant that is to your problem, does it happen in every flgiht? Link to comment Share on other sites More sharing options...
Topgun505 Posted June 21, 2015 Share Posted June 21, 2015 Where the heck do you find the required wave info for an airbase in the first place? None of the data I'm seeing in the mission editor appears to be it, and nothing included in the manual. And I don't even see it on the kneeboard. What am I missing? Topgun505 Win 10 Pro 64-bit, Intel Core i7-8700k, Evga GTX 1080 FTW, 64 GB DDR4 RAM, Alienware 34" 2K LED, TrackIR 5 Pro, Thrustmaster Warthog HOTAS, Saitek Pro Rudder, Thrustmaster MFDs x3, Razer Nostromo n52. Link to comment Share on other sites More sharing options...
Nevyn Posted June 21, 2015 Share Posted June 21, 2015 Where the heck do you find the required wave info for an airbase in the first place? None of the data I'm seeing in the mission editor appears to be it, and nothing included in the manual. And I don't even see it on the kneeboard. What am I missing? http://forums.eagle.ru/showthread.php?t=139775 Link to comment Share on other sites More sharing options...
Art-J Posted June 21, 2015 Share Posted June 21, 2015 Where the heck do you find the required wave info for an airbase in the first place? None of the data I'm seeing in the mission editor appears to be it, and nothing included in the manual. And I don't even see it on the kneeboard. What am I missing? Mission editor gives frequencies, and page 169 of the manual gives wave numbers corresponding to these. But more simple way is downloading UBoats' kneeboard mod for MiG-15 (contains a table with wave number data of all airbases except Novorossiysk), or downloading Chuck Owl's MiG-15 guide (contains copy of the table taken from aforementioned mod), or download LinoGermany's navigation map for DCSW. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
mytai01 Posted January 5, 2016 Share Posted January 5, 2016 All freqs can be seen on the F10 map when you select the airbase during the mission. Press the "K" button on your keyboard to see the Kneepad as you tune the radio and you'll see the exact frequency you're on. It works for both the Comms and Nav freqs. MS Win7 Pro x64, Intel i7-6700K 4.0Ghz, Corsair RAM 16Gb,EVGA GeForce GTX 1080 FTW GAMING ACX 3.0, w/ Adjustable RGB LED Graphics Card 08G-P4-6286-KR, Creative Labs SB X-FI Titanium Fatal1ty Champ PCIe Sound Card, Corsair Neutron XTI 1TB SSD, TM Warthog Throttle & Stick, TM TPR Pedels, Oculus Rift VR Headset CV1, Klipsch Promedia 4.1 Speakers... Link to comment Share on other sites More sharing options...
Buzzles Posted January 5, 2016 Share Posted January 5, 2016 All freqs can be seen on the F10 map when you select the airbase during the mission. Press the "K" button on your keyboard to see the Kneepad as you tune the radio and you'll see the exact frequency you're on. It works for both the Comms and Nav freqs. That's not true unless something has changed recently and I've not spotted it, F10 normally only shows the MHz values, eg 124Mhz for Batumi... Fancy trying Star Citizen? Click here! Link to comment Share on other sites More sharing options...
Art-J Posted January 5, 2016 Share Posted January 5, 2016 That's not true unless something has changed recently and I've not spotted it, F10 normally only shows the MHz values, eg 124Mhz for Batumi... I don't know how it was before (because I've just learned from You guys, that one can click on an airport icon in F10 map during mission :D), but mytai is right - You get all the data except wave numbers, as seen on screen below. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
Recommended Posts