philstyle Posted April 19, 2017 Share Posted April 19, 2017 Can anyone with experience in more than one of the warbirds explain/ demonstrate (Youtube vidoes eprhaps?) how the pilot's G-response works accross the various aircraft? I've noticed in the spit that. 1. Positive G loading causes a gradual (can occur quickly) blackout that is followed by an extended period of black-screen during which the pilot cannot manipulate controls but must wait for vision to return. this can be between 5 to 20 seconds.. (I've not timed it). Sometimes my GPU output will disable during this, and my monitor will flick to the "no DVI input" mode. 2. Negative G lodaing results in an "instant" black screen. This is recoverable very quickly by relaxing the G-forces. There is no mandatory wait-period like there is with positive G-loading. Is this the same for other types? On YouTube: https://www.youtube.com/philstylenz Storm of War WW2 server website: https://stormofwar.net/ Link to comment Share on other sites More sharing options...
amazingme Posted April 19, 2017 Share Posted April 19, 2017 Black outs are independent of the aircraft you're flying.. at least it should like that. In DCS, is not. I did a comparison between 109 and Spit and the BOs and G-locs are different.. Specs: Asus Z97 PRO Gamer, i7 4790K@4.6GHz, 4x8GB Kingston @2400MHz 11-13-14-32, Titan X, Creative X-Fi, 128+2x250GB SSDs, VPC T50 Throttle + G940, MFG Crosswinds, TrackIR 5 w/ pro clip, JetSeat, Win10 Pro 64-bit, Oculus Rift, 27"@1920x1080 Settings:2.1.x - Textures:High Terrain:High Civ.Traffic:Off Water:High VisRan:Low Heatblur:High Shadows:High Res:1920x1080 RoC:1024 MSAA:4x AF:16x HDR:OFF DefS: ON GCI: ON DoF:Off Lens: OFF C/G:390m Trees:1500m R:max Gamma: 1.5 Link to comment Share on other sites More sharing options...
philstyle Posted April 19, 2017 Author Share Posted April 19, 2017 Black outs are independent of the aircraft you're flying.. at least it should like that. In DCS, is not. I did a comparison between 109 and Spit and the BOs and G-locs are different.. Interesting, for me the spitfire behaves the same way your 109 does.. I cannot exit a spitfire positive-G-loc by relaxing the stick. In fact, for me, the GPU turns off! Maybe it is different depending on system also? On YouTube: https://www.youtube.com/philstylenz Storm of War WW2 server website: https://stormofwar.net/ Link to comment Share on other sites More sharing options...
=Pedro= Posted April 19, 2017 Share Posted April 19, 2017 In fact, for me, the GPU turns off! What do you mean ? Gigabyte Z390 Gaming X | i7 9700K@5.0GHz | Asus TUF OC RTX 4090 | 32GB DDR4@3200MHz | HP Reverb G2 | TrackIR 5 | TM Warthog HOTAS | MFG Croswinds Link to comment Share on other sites More sharing options...
philstyle Posted April 19, 2017 Author Share Posted April 19, 2017 What do you mean ? I mean that the connection from my monitor to my GPU is severed. about 50% of the time I get a message on my monitor that says "no DVI input found"... then the monitor tries to go into power saving mode. Only the return of the pilot's vision causes the connection to re-establish itself. This doesn't happen 100% of the time.. but it does happen a lot. On YouTube: https://www.youtube.com/philstylenz Storm of War WW2 server website: https://stormofwar.net/ Link to comment Share on other sites More sharing options...
=Pedro= Posted April 19, 2017 Share Posted April 19, 2017 Try to change power settings of your GPU and also screen ;) Gigabyte Z390 Gaming X | i7 9700K@5.0GHz | Asus TUF OC RTX 4090 | 32GB DDR4@3200MHz | HP Reverb G2 | TrackIR 5 | TM Warthog HOTAS | MFG Croswinds Link to comment Share on other sites More sharing options...
Recommended Posts