Jump to content

Help with Graphics settings


gizmo

Recommended Posts

Hi All,

 

I am in need of advise for the graphics settings for DCS. Would appreciate if anyone could share their in gate settings and Nvidia Control Panel settings as i cant seem to get the graphics balanced with good FPS and smooth game play.

 

Any help is very appreciated.

 

Thank you

If you want Peace, be prepared to fight for it ! :pilotfly:



 

 

Link to comment
Share on other sites

It would be good to post your specs, as well. It will allow you to get better advice.

ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:

Link to comment
Share on other sites

gizmo, you might be better off posting something like this, down in the

PC Hardware and Related Software Section, with your PC specs and DCS settings.

 

The Nvidia Control Panel settings depend on many things and what you looking or hoping to get from you PC specs, It's all about finding a good balance with the demand of simulating flight simulation.

 

.

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Link to comment
Share on other sites

Hi All,

 

Thank you all for your replies. My specs are as follows:

 

i7 6700K - 4Ghz - OC-4.5Ghz

Nvidia GTX 1080

Corsair DDR4 - 64BG @ 41Mghz

 

I am also trying to upload my DCS Settings and also my NCP settings but unable to do so.

If you want Peace, be prepared to fight for it ! :pilotfly:



 

 

Link to comment
Share on other sites

Hi All,

 

Thank you all for your replies. My specs are as follows:

 

i7 6700K - 4Ghz - OC-4.5Ghz

Nvidia GTX 1080

Corsair DDR4 - 64BG @ 41Mghz

 

I am also trying to upload my DCS Settings and also my NCP settings but unable to do so.

 

 

You look like you have a top rig..do you run 4k or multi displays?

Perhaps the wrong combination of game settings can cause issues even on top hardware.

Link to comment
Share on other sites

Hi All,

 

Thank you all for your replies. My specs are as follows:

 

i7 6700K - 4Ghz - OC-4.5Ghz

Nvidia GTX 1080

Corsair DDR4 - 64BG @ 41Mghz

 

I am also trying to upload my DCS Settings and also my NCP settings but unable to do so.

 

These are my settings for DCS 2.1 at the moment, DCS is going to be more optimized moving forward and I can turn these settings up more in different type of smaller missions, the settings and screenshot below are from the new Spitfire Campaign with quite a few AI and objects etc. I was trying to find a good balance here.

 

I only have the 1070, CPU overclocked at 4.9 when flying this mission. Frames are from 55 to 100 FPS. I also have Gsync which helps smooth things out. Try these settings for a start and tweak from there, it will change as ED makes updates.

 

Edit. This was at 2560 x 1440P screen res.

 

 

attachment.php?attachmentid=166964&stc=1&d=1501939392

 

Spitfire Campaign Screenshot

 

 

attachment.php?attachmentid=166965&stc=1&d=1501939392

Settings8-5-17.thumb.jpg.dbe24701684530758a77bd0827ab30a0.jpg

Settings8-5-17spitfire.thumb.jpg.3d6ea09d73ffbf5f696c0bee0e038a2d.jpg


Edited by David OC

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Link to comment
Share on other sites

Yes i run a 49" UHD curved 4K TV. Thank you very much for your settings. Will see if this helps. Unfortunately my TV does not have Gsync.

If you want Peace, be prepared to fight for it ! :pilotfly:



 

 

Link to comment
Share on other sites

Just remember gizmo that a TV will never be smooth because of some input lag, most tv's have large input lag, so you might think this is why you have problems in DCS with your setup, especially if you're using Track IR.

 

I have the ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms. That's a 1 millisecond refresh rate @ 144 Hz.

 

Your TV in Game mode might have a 21 millisecond refresh rate for example.

 

See if your TV has a game mode setting? We were discussing this recently here, No TV's run G sync, quite high end monitors only.

 

 

.


Edited by David OC

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Link to comment
Share on other sites

Guys can i ask you for your advise please? Which monitor would you recommend for flight sims? I mean something which is perhaps in the 4K resolution instead of a TV. I have to agree with a TV, the graphics are not really that smooth regardless of settings unless I'm missing out on something. I tried the above settings given by David OC but it has shimmers on the external view which really annoys. I would love to have a smooth experience with good visuals. I'm pretty sure there can be a compromise between both on a good monitor iSO a TV unless there are good setting out there for a 4K TV. Your thoughts please?

 

Regards

If you want Peace, be prepared to fight for it ! :pilotfly:



 

 

Link to comment
Share on other sites

Philips 40" 4K LED

 

I have a Philips 40" 4K LED (BDM4065UC) screen witch is a monitor and not a TV. It has the PC interface that is needed, namely 3 x DisplayPort version 1.2. The DisplayPort connection is really important! And it has to be version 1.2 or higher. I’m happy with it but as default I run the 2560x1440 resolution instead of 4K. 4K draws much on both CPU and GPU if I don’t go down on many of the DCS settings. I have found that best performance/graphics settings for my rig are 2560x1440, also makes the screen usable for normal applications without enlarging Windows text. Further I set MSAA and Anisotropic Filtering in DCS and make sure the GPU driver is set to “Application Controlled” for both of these, if you do not then you will lose a lot of FPS and DCS will be sluggish. I also run Vsync settings only in GPU driver because the DCS one draws too much frames (windowed mode because of Simple Radio usage). With this settings I get frames ranging from 30 - 80 depending on location, sometimes also down in the 20’s but that is more now on the new 1.5.7 and 2.1 versions of DCS. Get a 4K but first be sure your HW is up for the job! DCS is a power drain on GPU, CPU and disks. Check my spec in the “Spoiler”. Hope this helps on the way to 4K.

attachment.php?attachmentid=167068&d=1502113533

2045924698_options-systemandgraphics_best.thumb.png.6207ae4a767fbba31235c12578e8037e.png

 

EDIT: Maybe a bit unclear. Setting MSAA and AA on both GPU driver and in DCS will drain the frames! And please note I have OC'ed my CPU to 4.8!


Edited by HiJack
Link to comment
Share on other sites

  • 2 weeks later...

David, I cant get my G-sync working, any tricks?

 

Also, struggle with stutters... tweaking as we go

 

i9-7900X 3.30-4.3 Ghz 16GB Win10 Pro 64 GTX 1080Ti Acer XB321HK TM Warthog MFG TIR5 ButtKickerx2 Playseat

TM Warthog MFG TIR5 GT Omega Pro/ButKickerx1/WheelStandPro Playseat/ButKickerx2

Link to comment
Share on other sites

David, I cant get my G-sync working, any tricks?

 

Also, struggle with stutters... tweaking as we go

 

i9-7900X 3.30-4.3 Ghz 16GB Win10 Pro 64 GTX 1080Ti Acer XB321HK TM Warthog MFG TIR5 ButtKickerx2 Playseat

 

Are you using a display port cable to the monitor ?

METAR weather for DCS World missions

 

Guide to help out new DCS MOOSE Users -> HERE

Havoc Company Dedicated server info Connect IP: 94.23.215.203

SRS enabled - freqs - Main = 243, A2A = 244, A2G = 245

Please contact me HERE if you have any server feedback or METAR issues/requests

Link to comment
Share on other sites

  • 3 weeks later...
These are my settings for DCS 2.1 at the moment, DCS is going to be more optimized moving forward and I can turn these settings up more in different type of smaller missions, the settings and screenshot below are from the new Spitfire Campaign with quite a few AI and objects etc. I was trying to find a good balance here.

 

I only have the 1070, CPU overclocked at 4.9 when flying this mission. Frames are from 55 to 100 FPS. I also have Gsync which helps smooth things out. Try these settings for a start and tweak from there, it will change as ED makes updates.

 

 

 

Edit. This was at 2560 x 1440P screen res.

 

 

attachment.php?attachmentid=166964&stc=1&d=1501939392

 

Spitfire Campaign Screenshot

 

 

attachment.php?attachmentid=166965&stc=1&d=1501939392

 

I upped the screen res and the gamma notch, but used the rest of your settings, and I really like them.

 

I especially like what happens with the canopy reflections. Looks like real glass.

 

Thanks,

415668477_DCS2017-09-0421-18-39-83.thumb.jpg.22530d9e2c36a7995f4a6fb0fbea7ba2.jpg

1239372825_DCS2017-09-0421-04-59-29.thumb.jpg.95f08837f8d8697a9c89e547e9c25e14.jpg

2137464914_DCS2017-09-0421-05-06-93.thumb.jpg.24e9d7aaa32642df270f8d8509383e9b.jpg

676041250_DCS2017-09-0421-05-14-20.thumb.jpg.78ab9989a500a579e16ecba09ebf3394.jpg

1355748580_DCS2017-09-0421-18-59-79.thumb.jpg.5a23ca400ed69c755dc9aa22bc6e5507.jpg

  • Like 1

TWC_SLAG

 

Win 10 64 bit, 2T Hard Drive, 1T SSD, 500GB SSD, ASUS Prime Z390 MB, Intel i9 9900 Coffee Lake 3.1mhz CPU, ASUS 2070 Super GPU, 32gb DDR4 Ram, Track IR5, 32” Gigabyte curved monitor, TM Warthog HOTAS, CH Pedals, Voice Attack, hp Reverb G2.

Link to comment
Share on other sites

Hi guys, I just plugged in Vinnie Jones' settings and the graphics are lovely. For note I'm running i5 7500 not-OC, 8Gb corsair vengeance lpx 2133mHz, 6gb 1060 palit card at default settings. I have V-sync on atm and only managed a quick 1-2min flight before bed but it sat at 60fps for the whole flight over sukhumi in a Ka50.

Link to comment
Share on other sites

Hi guys, I just plugged in Vinnie Jones' settings and the graphics are lovely. For note I'm running i5 7500 not-OC, 8Gb corsair vengeance lpx 2133mHz, 6gb 1060 palit card at default settings. I have V-sync on atm and only managed a quick 1-2min flight before bed but it sat at 60fps for the whole flight over sukhumi in a Ka50.

 

Thanks for the shout out, but David OC deserves the credit for those settings.

TWC_SLAG

 

Win 10 64 bit, 2T Hard Drive, 1T SSD, 500GB SSD, ASUS Prime Z390 MB, Intel i9 9900 Coffee Lake 3.1mhz CPU, ASUS 2070 Super GPU, 32gb DDR4 Ram, Track IR5, 32” Gigabyte curved monitor, TM Warthog HOTAS, CH Pedals, Voice Attack, hp Reverb G2.

Link to comment
Share on other sites

  • 2 years later...

How to run DCS in Windowed Mode

 

I am just getting started, have 3 32" Acer monitors running at 2560x1440, Vsynch, and using only 1 monitor active. Can I run in windowed mode so that I can use the red x (upper right hand corner) to shutdown.

 

 

Otrman

Maingear Water Cooled w/Intel 9, 8 Cores, 5.00 Auto Turbo, 32 GB Memory, 2 1TB SSD Drives, NVIDIA 2080ti, 3 4K G-Sync Acer 32" Monitors and 1 27" Monitor, Honeycomb Alpha w/X52 Throttle

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...