Pavespawn Posted March 29, 2018 Share Posted March 29, 2018 I have been working for the last 9 hours on getting my CDU display to work. Admittedly the majority of that time was just getting it to fit in the panel the right way but I managed to sort that out. My real issue is getting my screen to display something. I tried to write my own sketch, nothing. I loaded up the sketch I found on here that Tekkx wrote ( Super awesome Tekkx Sketch) and nothing. I know the screen is wired up correctly because I can load the graphics test sketch in the Adifruit library and it works like a charm. Perhaps I could get some advice as to what I am missing? Oh, also when I load the sketch I get an error on this line: UTFTGLUE myGLCD(0x9341,A2,A1,A3,A4,A0); The error tells me the integer is too large but it compiles and loads anyway. I followed these instructions and wired it to a mega: Adafruit 8-bit wiring and test I am using the Adafruit 320x480 screen used in the instructions. Thanks for any assistance. My brother is coming in from out of town and I wanted to have the screen working to show it off. :thumbup: Link to comment Share on other sites More sharing options...
Recommended Posts