Abetterway Posted June 28, 2018 Share Posted June 28, 2018 Hi guys, I am new and in learning process. How to show the JTAC target on TAD? After I read back 9 line, nothing happen on TAD. Link to comment Share on other sites More sharing options...
overalien Posted June 28, 2018 Share Posted June 28, 2018 It’s a bug that has been reported. Sent from my iPhone using Tapatalk __________________ overalien Hog Driver starting to really like the Tomcat System specs: Intel i7-8700k - OC to 5.0 GHz | 32 GB RAM 3600 MHz | Nvidia 1080ti SLi | Mixed Storage - Win 10 and DCS on Samsung SSD 970 Pro Flightgear: 7 Displays (3 x 1440p, 1 X 1080p, 3 X Lilliput Touch) | 3 x Cougar MFDs | Warthog HOTAS | Thrustmaster TPR Pedals | iBEAM Shaker + Simshaker for Aviators w. Sound Module | Helios | VAICOM Pro + AIRIO | TrackIR 5 Link to comment Share on other sites More sharing options...
Abetterway Posted June 28, 2018 Author Share Posted June 28, 2018 It’s a bug that has been reported. Sent from my iPhone using Tapatalk Thanks~ Link to comment Share on other sites More sharing options...
Yurgon Posted June 28, 2018 Share Posted June 28, 2018 Yeah, unfortunately the DCS JTAC has been broken for ages. After the 9-Line, the whole dialog just stops. If it's unbroken at some point, just be aware that not all JTACs are equipped to send targets via datalink, so you may still have to punch in the coords yourself. If you're interested in the Mission Editor, in order to be able to send targets via datalink, JTAC units need to have "EPLRS" set to on. Link to comment Share on other sites More sharing options...
Emmy Posted June 28, 2018 Share Posted June 28, 2018 In OB, it's sort of been working lately. Managed to complete the 9-Line process four times with an AI JTAC just today including read back and contact. No target info appeared on the TAD though. The MGRS coordinates were all on the money though. [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
Yurgon Posted June 28, 2018 Share Posted June 28, 2018 In OB, it's sort of been working lately. Cool, that's good to know! Let's hope it's finally fixed. Link to comment Share on other sites More sharing options...
Kazius Posted June 29, 2018 Share Posted June 29, 2018 Been doing A-10C Red Flag campaign this week using open beta build. Found when the JTAC is on FM frequency he sometimes doesn't respond to check ins. Fortunately I didn't care and just took out primary's described in briefings and still completed the missions. So although some things seem to be fixed in OB, other things seem to be broken. Link to comment Share on other sites More sharing options...
Emmy Posted June 29, 2018 Share Posted June 29, 2018 Cool, that's good to know! Let's hope it's finally fixed. It's far from fixed... Location of fellow net members is not updating correctly (if at all) and you can't share SPI or messages. Much remains to be done. [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
Abetterway Posted July 4, 2018 Author Share Posted July 4, 2018 Is this fixed by today update? Link to comment Share on other sites More sharing options...
nessuno0505 Posted July 4, 2018 Share Posted July 4, 2018 I think we have to try... Link to comment Share on other sites More sharing options...
Nume Noctre Posted July 27, 2018 Share Posted July 27, 2018 Hopefully it is fixed, it’s a real pain to always enter coordinates... Gesendet von iPhone mit Tapatalk [sIGPIC][/sIGPIC] Check out my channel Link to comment Share on other sites More sharing options...
Emmy Posted July 27, 2018 Share Posted July 27, 2018 Seems to be pretty much back to SOP in Open Beta. I "assume" this last bump upwards for Stable should fix it there too. [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
splash Posted July 27, 2018 Share Posted July 27, 2018 I recently finished A-10C Red Flag campaign and JTAC targets (red triangle) always were displayed in TAD. I had no problems at all when communicating with JTAC. I suppose it is solved. Link to comment Share on other sites More sharing options...
Nume Noctre Posted July 27, 2018 Share Posted July 27, 2018 I recently finished A-10C Red Flag campaign and JTAC targets (red triangle) always were displayed in TAD. I had no problems at all when communicating with JTAC. I suppose it is solved. Hooray!! It’s about time! Gesendet von iPhone mit Tapatalk [sIGPIC][/sIGPIC] Check out my channel Link to comment Share on other sites More sharing options...
A.P. Hill Posted November 19, 2018 Share Posted November 19, 2018 I never see a red triangle on the TAD . Must be doing something wrong. Link to comment Share on other sites More sharing options...
A.P. Hill Posted November 19, 2018 Share Posted November 19, 2018 Well, after flying the simple little test mission I made for the 5th or 6th time I did see a small red triangle that I was able to hook my cursor to on the TAD. I think my problem was/is is my 70 year old eyes just didn't see the darn thing. I am finding the A10C challenging but a ton of fun! Wish I had an instructor to help me out though. Manual's and tutorial videos are great resources and I have watched many, but there is nothing like interacting with someone in real time. Link to comment Share on other sites More sharing options...
lahsoldier Posted November 19, 2018 Share Posted November 19, 2018 Sent you a private message. Ill help you if you like Asus Prime 390A, Intel I7-8700k@4.8ghz, 32g ram, Nvidia EVGA GeForce RTX 2070, Track IR5, SSD(DCS dedicated), HDD for Win 10. TM Warthog 78051 Track IR5 Thrustmaster pedels Link to comment Share on other sites More sharing options...
Emmy Posted November 19, 2018 Share Posted November 19, 2018 Well, after flying the simple little test mission I made for the 5th or 6th time I did see a small red triangle that I was able to hook my cursor to on the TAD. I think my problem was/is is my 70 year old eyes just didn't see the darn thing. I am finding the A10C challenging but a ton of fun! Wish I had an instructor to help me out though. Manual's and tutorial videos are great resources and I have watched many, but there is nothing like interacting with someone in real time. One tip for the TAD: Change your display to EXP 1 via China Hat Forward Short and zoom to a level where your primary and secondary target waypoints are displayed. It can really help your SA because the map anchors in NORTH UP orientation and things won't go in circles around you. Turning the map off completely can also help declutter the display making it easier to see the data link from the JTAC and other targets being shared by other assets. [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
MasterZelgadis Posted November 19, 2018 Share Posted November 19, 2018 One tip for the TAD: Change your display to EXP 1 via China Hat Forward Short and zoom to a level where your primary and secondary target waypoints are displayed. It can really help your SA because the map anchors in NORTH UP orientation and things won't go in circles around you. Turning the map off completely can also help declutter the display making it easier to see the data link from the JTAC and other targets being shared by other assets. Sometimes I do that, too. But even without that EXP mode, you have a little triangle on the circle showing to north. "Sieh nur, wie majestätisch du durch die Luft segelst. Wie ein Adler. Ein fetter Adler." http://www.space-view.net Link to comment Share on other sites More sharing options...
Frederf Posted November 19, 2018 Share Posted November 19, 2018 The JTAC must be SADL capable and SADL enabled in the editor. They will only attempt to send data if they can, e.g. "standby data". Link to comment Share on other sites More sharing options...
A.P. Hill Posted November 21, 2018 Share Posted November 21, 2018 Please excuse my ignorance but what is SADL enabled? I don't see it as an option in the ME, unless you are referring to EPLRS being "on" Link to comment Share on other sites More sharing options...
Frederf Posted November 21, 2018 Share Posted November 21, 2018 Yeah, Enhanced Position Location Reporting System (lol, position location) is a possible function of the Situation Awareness Data Link. Some units can send data and others can't. It's a good hint that it can when it can and does show its position over data link. Link to comment Share on other sites More sharing options...
Razor18 Posted December 3, 2018 Share Posted December 3, 2018 Hay Guys, a bit off, but how can I pick the most recent JTAC target triangle, when earlier there were several within the same tight TAD area, and when a new one arrives, ALL triangles are blinking, even previous ones. It is actually the Maple Flag TTQ JTAC mission I'm having a bit of this problem with... Thanks... Link to comment Share on other sites More sharing options...
Frederf Posted December 4, 2018 Share Posted December 4, 2018 Blinking means that you didn't accept or reject it. It's flashing to prompt you to do something. Every time you get a new tasking object you will be prompted WILCO/CNCO on the TAD page. Select WILCO to accept each new tasking. When done with a tasking select it and delete if it might interfere with your next. Link to comment Share on other sites More sharing options...
Razor18 Posted December 4, 2018 Share Posted December 4, 2018 Blinking means that you didn't accept or reject it. It's flashing to prompt you to do something. Every time you get a new tasking object you will be prompted WILCO/CNCO on the TAD page. Select WILCO to accept each new tasking. When done with a tasking select it and delete if it might interfere with your next. Thanks for your reply. I'm pretty sure I acknowledged all of them on TAD when recieving. But I didn't delete the messages from the message screen afterwards. Is that what I should do? Just because I'm not sure the triangles can be deleted from TAD af all... Thanks Link to comment Share on other sites More sharing options...
Recommended Posts