Jump to content

Red Flag Training Missions - F-14B


Recommended Posts

Just finished the campaign.. I really enjoyed it, thank U so much beppe_goodolrebel!!

 

I only found some minor issues to brush it up (if you like to get some feedback):

 

- Forced to taxi to parking at the very end of the main runway. Most of the times I could taxi out to parking area using the exit at the middle of the runway, but this way the mission-end message does not trigger.

- Maybe add some more important data on the briefing, like loadout or relevant freqs. In the first AG mission I run low on fuel and cannot contact the tanker cause I didn't know its freq and there was no answer on Ch7

 

As I said, just minor issues.. Great job, I really fun flying it!!!

Spanish Ala12rv Pilot 

Nevada TTR // Persian Gulf // Syria // South Atlantic

T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper

MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB

QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat

Link to comment
Share on other sites

Forced to taxi to parking at the very end of the main runway. Most of the times I could taxi out to parking area using the exit at the middle of the runway, but this way the mission-end message does not trigger.

Actually this is the route your AI wingman use to taxi. I believe the real Nellis would not have bidirectional flow on the taxiway Aplha at the given time. I could use this exit too but didn't want to test it for trigger zones :)

 

 

btw: Am I supposed to hear anything more than "What a lovely day..." from the tanker in M#3? I'm afraid I wasn't very good at keeping the tight formation and never heard from him again. So I just waited for time 1:05 and head to base until Mission Completed. Did I miss sth?

🖥️ Win10 i7-10700KF 32GB RTX3060   🥽 Rift S   🕹️ T16000M HOTAS   ✈️ FC3, F-14A/B, F-15E   ⚙️ CA   🚢 SC   🌐 NTTR, PG, Syria

Link to comment
Share on other sites

Just finished the campaign.. I really enjoyed it, thank U so much beppe_goodolrebel!!

 

I only found some minor issues to brush it up (if you like to get some feedback):

 

- Forced to taxi to parking at the very end of the main runway. Most of the times I could taxi out to parking area using the exit at the middle of the runway, but this way the mission-end message does not trigger.

- Maybe add some more important data on the briefing, like loadout or relevant freqs. In the first AG mission I run low on fuel and cannot contact the tanker cause I didn't know its freq and there was no answer on Ch7

 

As I said, just minor issues.. Great job, I really fun flying it!!!

 

:thumbup:

 

Right , there is not a trigger zone on the "other" side but I can totally add it.

 

For freqs there is the Mission Data Card in the kneeboard. i'll check tanker in every mission, I had to replace the KC130 with KC135 , maybe I miss something.

You can always use RIO to do it for you. With the JESTER AI menu -> RADIO -> TUNE TAC -> TANKER

 

btw: Am I supposed to hear anything more than "What a lovely day..." from the tanker in M#3? I'm afraid I wasn't very good at keeping the tight formation and never heard from him again. So I just waited for time 1:05 and head to base until Mission Completed. Did I miss sth?

 

There was a wrong flag , try use the last version.

Anyway try to stay close to tanker < 1nm ( at least once )

Link to comment
Share on other sites

  • 1 month later...

Loving the campaign but my wingman doesn't respond on any frequency and I can't get the tanker (mission 3 AAR and BFM) to respond when I want to refuel, easy comms is offand all the frequency's check out according to the kneeboard???

Link to comment
Share on other sites

Loving the campaign but my wingman doesn't respond on any frequency and I can't get the tanker (mission 3 AAR and BFM) to respond when I want to refuel, easy comms is offand all the frequency's check out according to the kneeboard???

 

Let me check the mission ... meanwhile you can tell Jester to switch his radio to the tanker freq. in the "TUNE TAC" menu in his radio menu.

 

Wingman is in Channel 1 both radios.

Link to comment
Share on other sites

Cheers, tried the tac tune and still nothing it's very odd but maybe something I'm doing (or rather not doing)
Did you try FM or AM? There is a Jester command to toggle between the two.

 

Cheers!

 

 

Sent from my SM-G950F using Tapatalk

W10 Home 64Bit, Intel Skylake I5 6600K 3.50GHz, ASUS ROG Stryx Z270F MoBo, 32GB G.Skill RipJaws V DDR4 3200 RAM, Samsung 960 Pro 512GB M.2 SSD (OS), Samsung 850 Pro 512GB SSD, 2TB Seagate SDHD, 2TB WD Green HDD, GALAX GTX GeForce 1070 EXOC Sniper White 8GB VRAM

Link to comment
Share on other sites

I didn't as the tower and the scripted comms is working fine. Will give that a try in a bit. **update tried changing the range from am to fm and also back but no change still didn't work, worth a try though**


Edited by mustard7550
Link to comment
Share on other sites

Great campaign!! I am really enjoying it..

However, this happened to me during mission 3 (night formation):

While escorting refueler, everything going right and calm, I received a message "Head stearpoint 3 and RTB". No more messages for the rest of the flight. I got to my parking slot. Shutt down engines and exit mission.

Now I have to start the campagin from the very begining. What went wrong? Any way to continue the campaign from mission 4?

Thank you!!!

 

Well, I went through campaign missions 1 and 2.

But why the hell did I loose mission 2 when not completing mission 3 due to nothing happening after leaving tanker? I had to start over with mission 2, damn, this is really annoying.

Flight 2 and 3 took me approx 3 hours in total. I this behaviour a DCS bug?

 

edit:

I changed the file "C:\Users\pilot\Saved Games\DCS.openbeta\MissionEditor\logbook.lua" to the following code below.

Now I can start over with the fourth mission.

 

                   ["history"] = 
                   {
                       [1] = 
                       {
                           ["datetime"] = "Fri May 31 23:09:54 2019",
                           ["agKills"] = 0,
                           ["aaKills"] = 0,
                           ["result"] = 100,
                           ["deathsCount"] = 0,
                           ["stage"] = 1,
                           ["mission"] = "Red Flag Training - Day 0 - Nellis Welcome!.miz",
                       }, -- end of [1]
                       [2] = 
                       {
                           ["datetime"] = "Sat Jun  1 00:34:59 2019",
                           ["agKills"] = 0,
                           ["aaKills"] = 0,
                           ["result"] = 100,
                           ["deathsCount"] = 0,
                           ["stage"] = 2,
                           ["mission"] = "Red Flag Training - Day 1 - NTTR and Formation Flying .miz",
                       }, -- end of [2]
                       [3] = 
                       {
                           ["datetime"] = "Sat Jun  1 02:24:16 2019",
                           ["agKills"] = 0,
                           ["aaKills"] = 0,
                           ["result"] = 100,
                           ["deathsCount"] = 0,
                           ["stage"] = 3,
                           ["mission"] = "Red Flag Training - Day 1 - Night Formation Flying.miz",
                       }, -- end of [3]
		[4] = 
                       {
                           ["stage"] = 4,
                           ["mission"] = "Red Flag Training - Day 2 - AAR and BFM Training.miz",
                       }, -- end of [4]
                   }, -- end of ["history"]

 

Happy to play this awesome campaign, thanks for creating this wonderful experience!


Edited by TOViper
got it sorted out ...

Visit https://www.viggen.training
...Viggen... what more can you ask for?

my computer:
AMD Ryzen 5600G | NVIDIA GTX 1080 Ti OC 11GB | 32 GB 3200 MHz DDR4 DUAL | SSD 980 256 GB SYS + SSD 2TB DCS | TM Warthog Stick + Throttle + TPR | Rift CV1

 

Link to comment
Share on other sites

I have a small suggestion for mission 4 (AA Guns), and I think this counts for mission 5 as well (despite I will have to fly it tomorrow). It was the case that Jester got a little nervous right from the beginning on.

 

It would be better IMHO if the F-5 would be "Invisible=true" starting from waypoint 0 until waypoint 3. For waypoints 3 to 9 they should be "Invisible=false", and then again "Invisible=true" again when flying back to their base (1 F-5 did escape, yes!).


Edited by TOViper

Visit https://www.viggen.training
...Viggen... what more can you ask for?

my computer:
AMD Ryzen 5600G | NVIDIA GTX 1080 Ti OC 11GB | 32 GB 3200 MHz DDR4 DUAL | SSD 980 256 GB SYS + SSD 2TB DCS | TM Warthog Stick + Throttle + TPR | Rift CV1

 

Link to comment
Share on other sites

I have a small suggestion for mission 4 (AA Guns), and I think this counts for mission 5 as well (despite I will have to fly it tomorrow). It was the case that Jester got a little nervous right from the beginning on.

 

It would be better IMHO if the F-5 would be "Invisible=true" starting from waypoint 0 until waypoint 3. For waypoints 3 to 9 they should be "Invisible=false", and then again "Invisible=true" again when flying back to their base (1 F-5 did escape, yes!).

 

:thumbup:

Link to comment
Share on other sites

I didn't as the tower and the scripted comms is working fine. Will give that a try in a bit. **update tried changing the range from am to fm and also back but no change still didn't work, worth a try though**

 

I think I've swapped freq for Jester radio , Departure for Approach and viceversa.

 

Enter the mission editor, go to the radio preset page for group Colt 1, change Channel 5 (DEPARTURE) should be 385.4 and Channel 6 (APPROACH) 291.725 .

 

Anyway pilot radio is good , you can use that with same channels.

Link to comment
Share on other sites

I have a small suggestion for mission 4 (AA Guns), and I think this counts for mission 5 as well (despite I will have to fly it tomorrow). It was the case that Jester got a little nervous right from the beginning on.

 

It would be better IMHO if the F-5 would be "Invisible=true" starting from waypoint 0 until waypoint 3. For waypoints 3 to 9 they should be "Invisible=false", and then again "Invisible=true" again when flying back to their base (1 F-5 did escape, yes!).

 

Why not simply tell Jester to shut up? Or F-5E could have radar off until the fight and then off again if that bothers anyone.

🖥️ Win10 i7-10700KF 32GB RTX3060   🥽 Rift S   🕹️ T16000M HOTAS   ✈️ FC3, F-14A/B, F-15E   ⚙️ CA   🚢 SC   🌐 NTTR, PG, Syria

Link to comment
Share on other sites

To install as a campaign instead of individual missions, do we need to make a folder for the campaign missions or just place them in the Saved Games campaign/en folder?

 

Sorry, not real familiar with DCS's mission folder structure.

"These are NOT 1 to 1 replicas of the real aircraft, there are countless compromises made on each of them" - Senior ED Member

 

Modules - Damn near all of them (no Christian Eagle or Yak)

System - i7-12700K, 64Gig DDR4 3200 RAM, RTX-3080, 3 32" monitors at 5760 x 1080, default settings of High (minor tweaks)

Link to comment
Share on other sites

  • 1 month later...

Just tried downloading these missions but nothing is showing up. I've placed it in the F-18/Missions/Single folder and noticed it's downloaded as a .rar file when all the other ones are .miz files. When I downloaded it, I didn't have the option to extract the files and manually moved them to my F 18 mission folder.

Link to comment
Share on other sites

Just tried downloading these missions but nothing is showing up. I've placed it in the F-18/Missions/Single folder and noticed it's downloaded as a .rar file when all the other ones are .miz files. When I downloaded it, I didn't have the option to extract the files and manually moved them to my F 18 mission folder.

 

You have to download Winrar app to extract the .miz inside the .rar file.

 

https://www.win-rar.com/download.html?&L=0

Link to comment
Share on other sites

Just tried downloading these missions but nothing is showing up. I've placed it in the F-18/Missions/Single folder and noticed it's downloaded as a .rar file when all the other ones are .miz files. When I downloaded it, I didn't have the option to extract the files and manually moved them to my F 18 mission folder.

 

...but these are for F-14B :dunno:

🖥️ Win10 i7-10700KF 32GB RTX3060   🥽 Rift S   🕹️ T16000M HOTAS   ✈️ FC3, F-14A/B, F-15E   ⚙️ CA   🚢 SC   🌐 NTTR, PG, Syria

Link to comment
Share on other sites

  • 7 months later...

O, I post it here too as I got no answer so far in F-14 forum. I am stuck in Mission 06, the aggressor mission. I get no response from ground crew for connecting the electric power nor air supply. So can not start. Can I somehow edit the mission in mission editor so that it is starting with running engines, for example?

Link to comment
Share on other sites

O, I post it here too as I got no answer so far in F-14 forum. I am stuck in Mission 06, the aggressor mission. I get no response from ground crew for connecting the electric power nor air supply. So can not start. Can I somehow edit the mission in mission editor so that it is starting with running engines, for example?
Yes, I think that is what I did IIRC. It is because the Aggressors are considered Red force, and you are at a Blue base, so no ground services available.

 

Hope it helps

Cheers!

 

Sent from my SM-G950F using Tapatalk

W10 Home 64Bit, Intel Skylake I5 6600K 3.50GHz, ASUS ROG Stryx Z270F MoBo, 32GB G.Skill RipJaws V DDR4 3200 RAM, Samsung 960 Pro 512GB M.2 SSD (OS), Samsung 850 Pro 512GB SSD, 2TB Seagate SDHD, 2TB WD Green HDD, GALAX GTX GeForce 1070 EXOC Sniper White 8GB VRAM

Link to comment
Share on other sites

O, I post it here too as I got no answer so far in F-14 forum. I am stuck in Mission 06, the aggressor mission. I get no response from ground crew for connecting the electric power nor air supply. So can not start. Can I somehow edit the mission in mission editor so that it is starting with running engines, for example?

 

 

I gave you answer in the F14 forum

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...