Silversmith Posted February 16, 2020 Share Posted February 16, 2020 Say, I get this WE real pimple from DCS and Perepherie .. What is the logic behind VA / Vaicom? I learned the words "TACAN" "tune" and "Stennis" especially to the dictionary of Windows speech recognition. I have also had Win10's English language training run several times. Needless to say, I switched my entire system to English. But when I say “TACAN tune Stennis” to Jester, he understands everything from “TACAN tune tennis” to “TACAN you and stennis” to !Attention!: “Tacan urine! Stennis ". (Note the English spelling!) I understand that VA can have some problems with my Rhenish accent. But my English and American friends have never made me aware that I should have such a blanket in my mouth when I speak. (Please report any translating issues promptly to google!) I created an Alias in the Vaicom editor of 'Carrier' because it refused to recognise Stennis. Works a treat now (Tacan Tune Carrier) Link to comment Share on other sites More sharing options...
sSkullZnBoneZz Posted February 16, 2020 Share Posted February 16, 2020 Update is working fine for me also, the only thing is when I do a cold start and request ground power, etc. the ground crew response is inaudible. I exited out of VA and did a repair on DCS and the ground crew was audible. However, once I started VA then the problem reappears. Any ideas? Liquid Cooled i9 11900K | GeForce RTX 2080 | 32 gig RAM | SSD Samsung 850 EVO | HP Reverb G2 TM F/A-18 Stick | Virpil WarBRD | WinWIng F/A-18 HOTAS Link to comment Share on other sites More sharing options...
Sofapiloz Posted February 16, 2020 Share Posted February 16, 2020 I created an Alias in the Vaicom editor of 'Carrier' because it refused to recognise Stennis. Works a treat now (Tacan Tune Carrier) So in my case, would I have to use “urine” as an alias for “Tune”? My question was more about how VIACOM or Voice Attack evaluates what is spoken. It seems that it accepts everything impossible before it turns to the probable. Link to comment Share on other sites More sharing options...
Codawa Posted February 16, 2020 Share Posted February 16, 2020 Okay folks version 2.5.16 is out, compatibility update for DCS 2.5.6 OB. Let me know how it goes and thanks for your support :thumbup: Hollywood Works fine. Thanks :thumbup: Link to comment Share on other sites More sharing options...
Hollywood_315 Posted February 16, 2020 Author Share Posted February 16, 2020 @Sofapiloz Keywords training is key (pun alert). Also you could just use the German recognition engine instead. Dictionary translations are available: see link in first post of this thread. @sSkullZnBoneZz Switch REDIR to off on the Audio tab. For redirecting of audio use the DCS audio settings. Grtz There is no spoon. VAICOM PRO plugin for DCS World www.vaicompro.com Link to comment Share on other sites More sharing options...
Nasder Posted February 16, 2020 Share Posted February 16, 2020 For unknown reasons, my DCS decided to stop using the DCS.openbeta folder in saved games and switch to just DCS after 2.5.6, fine, works for me. But VAICOM keeps using the open beta save game folder to place some files in. I've manually copied over the files myself, but it's not something I want to keep doing. How can I change this save game location in VAICOM? I only seem to find a place to switch the actual DCS install location. /Nasder, "I came, I saw, I got shot down." Link to comment Share on other sites More sharing options...
Aerovenator Posted February 16, 2020 Share Posted February 16, 2020 DCS always halts at 10% - then I repair and run DCS without VA and it will then load. Have this error still after updating VAICOM. I7-9700K -- 32GB RAM -- RTX 4070 -- Virpil T-50CM3 Throttle + WarBRD Base -- Thrustmaster TPR -- Quest 3 Link to comment Share on other sites More sharing options...
sSkullZnBoneZz Posted February 16, 2020 Share Posted February 16, 2020 @Hollywood, thanks that did it. Liquid Cooled i9 11900K | GeForce RTX 2080 | 32 gig RAM | SSD Samsung 850 EVO | HP Reverb G2 TM F/A-18 Stick | Virpil WarBRD | WinWIng F/A-18 HOTAS Link to comment Share on other sites More sharing options...
dburne Posted February 16, 2020 Share Posted February 16, 2020 :thumbup: Everything looking good on my end so far with 2.5.6. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
0414 Wee Neal Posted February 16, 2020 Share Posted February 16, 2020 I still have the freeze at 10%. I run repair and DCS loads, but not with VA. I have done full shut down and restart, repair and clen to DCS, still no joy; sorry! Neal Desktop PC: Intel i7 14700K, MSI Z790 MAG Tomahawk MOBO, 64Gb RAM , GPU Nvidia RTX 3080ti Windows 11, VPC joystick, Crosswind rudder peddles, HP Reverb G2, VPC Collective, DOF Reality H2, Gametrix seat, WinWing panels. Link to comment Share on other sites More sharing options...
tapi Posted February 16, 2020 Share Posted February 16, 2020 THX Hollywood, works fine now! Smoke me a kipper I'll be back for breakfast! (Ken Gatward before his solo Beaufighter mission 1943)See vid here HW: i7-12700K, 32 GB RAM, MB PRO Z690-A DDR4 , GTX 3080, LCD UltraWQHD (3440x1440) G-SYNC 120Hz,Tobii Eye Tracker 5, VKB Gunfighter III (KG12 WWII), MFG Crosswind, AuthentiKit Throttle & Trims, Windows 11 64-bit Link to comment Share on other sites More sharing options...
dawgie79 Posted February 16, 2020 Share Posted February 16, 2020 Not me. No joy, DCS 2.5.6 keeps hanging at 10% when starting, even after the latest VAICOM update. Have to repair and then don't use VC+VAICOM, otherwise it hangs again and needs to repair again as well. Oh well. Going to wait untill things are more fleshed out, I'll use to comms menu for now. Link to comment Share on other sites More sharing options...
Japo32 Posted February 16, 2020 Share Posted February 16, 2020 Same to me. Latest update and hang and 10% Link to comment Share on other sites More sharing options...
Svsmokey Posted February 16, 2020 Share Posted February 16, 2020 Thanks for the fast work ! In VR , i can't fly without V Pro , and i just tested your update in 2.6 . :thumbup::thumbup::thumbup: 9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2 Link to comment Share on other sites More sharing options...
RogueSqdn Posted February 16, 2020 Share Posted February 16, 2020 Thanks for your quick work. I also had the audio redirect problem. Unfortunately, by switching off the audio redirect, you get the chatter and JesterAI on the external speakers. Is there a plan to remedy this? Thanks DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
Japo32 Posted February 16, 2020 Share Posted February 16, 2020 Tried to remove the export.lua and VAICOMPRO folder from script and made a repair.. and it doesn't work. It only work after making a repair and not using Vaicom. Of course using 2.5.6 and the latest vaicom update. But no luck. Link to comment Share on other sites More sharing options...
dawgie79 Posted February 16, 2020 Share Posted February 16, 2020 Thanks for the fast work ! In VR , i can't fly without V Pro , and i just tested your update in 2.6 . :thumbup::thumbup::thumbup: True that. Even though on my system VAICOM isn't working at the moment, I noticed I started talking anyway when using the radios, only to discover it won't work without VAICOM. :doh: Link to comment Share on other sites More sharing options...
streakeagle Posted February 16, 2020 Share Posted February 16, 2020 Okay folks version 2.5.16 is out, compatibility update for DCS 2.5.6 OB. Let me know how it goes and thanks for your support :thumbup: Hollywood Thank you for the quick response as I have grown dependent on VAICOM for enjoying DCS World, especially with the F-14 Rio. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
nessuno0505 Posted February 16, 2020 Share Posted February 16, 2020 Here all works flawlessly with 2.5.6 and vaicom pro latest update. For people still having problems, maybe it is due to other mods (my only two external software in dcs are tacview and vaicom pro). Link to comment Share on other sites More sharing options...
Japo32 Posted February 17, 2020 Share Posted February 17, 2020 No other mod here but simple radios which is not active while I run dcs... Link to comment Share on other sites More sharing options...
lxsapper Posted February 17, 2020 Share Posted February 17, 2020 Japo32 make sure to select the option O.B. for Vaicom. I think Vaicom will use the old structure for compatibility wih stable if you don't. Link to comment Share on other sites More sharing options...
cdjung1 Posted February 17, 2020 Share Posted February 17, 2020 The on and off dialog issue disappeared with the update. For me the redirect is still reversed... setting to speakers in redirect goes to the rift s and setting to rift s goes to external speakers. I can give voice commands, but get no audible response from ground crew, or ATC, or anything for that matter. Ran a repair before the Viacom update and no more hangs at launch, but no idea how to fix the no audible response issue. Not running any addons. Link to comment Share on other sites More sharing options...
hreich Posted February 17, 2020 Share Posted February 17, 2020 Works for me in 2.5.6 Sent from my Redmi Note 4 using Tapatalk [sIGPIC][/sIGPIC] Pilot from Croatia Link to comment Share on other sites More sharing options...
waistcat Posted February 17, 2020 Share Posted February 17, 2020 No in game sound responses for me either. I can see there was responses recorded in the speech log window but no audio on any menu. i7 7700 @ 4.7GHz--GTX1080ti--Samsung SSD 500GB--32 gigs of RAM--TH Warthog--Crosswinds rudder--HP Reverb--Dedicated Sim room. Link to comment Share on other sites More sharing options...
Silversmith Posted February 17, 2020 Share Posted February 17, 2020 Finally bit the bullet and implemented DCS 2.5.6. since I couldn't get the updated VAICOM working with the old DCS 2.5.5 The VAICOM update worked perfectly with 2.5.6 Link to comment Share on other sites More sharing options...
Recommended Posts