Kayos Posted June 7, 2018 Share Posted June 7, 2018 Every time I try to use HSEL it will make the plane turn in circles. How do you make it fly to the active waypoint? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
David OC Posted June 7, 2018 Share Posted June 7, 2018 Here is a quick pic I took to show someone else about how to use this. I was using the ATC and heading select when being lazy sightseeing.:) i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link Link to comment Share on other sites More sharing options...
Kayos Posted June 7, 2018 Author Share Posted June 7, 2018 Ah, that pic helps :) Thanks guys! [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
aileron Posted June 7, 2018 Share Posted June 7, 2018 I think you mean you wish to follow the waypoint paths, which should be the Course Select; CSEL. I personally haven't been able to get that to enable. I bet at this time its not enabled yet. HSEL, is just that, set your heading with the HDG Switch below the UFC on the LEFT side. You should see your Heading Bug move on the HSI. If you want to follow your waypoint just set it to the same course as your waypoint. You'll have to tweak it in flight to follow the course line perfectly unless you time your turns perfectly. ETA: ahh... people beat me to it, I couldn't find a good pic. :p Link to comment Share on other sites More sharing options...
Mad Dog 7.62 Posted June 7, 2018 Share Posted June 7, 2018 I think you mean you wish to follow the waypoint paths, which should be the Course Select; CSEL. I personally haven't been able to get that to enable. I bet at this time its not enabled yet. Nope, course select is not an autopilot mode, its for helping with lineup on the carrier or runway. [sIGPIC][/sIGPIC] Gigabyte GA97XSLI Core i7 4790 @ 4.0 Ghz MSI GTX 1080ti 32 Mb RAM DDR3-2133 512GB SSD for DCS HP Reverb VR HMD Thrustmaster Warthog & MFG Crosswind Link to comment Share on other sites More sharing options...
aileron Posted June 7, 2018 Share Posted June 7, 2018 Yea, I thought it might slave to the waypoints plus TACAN, but TACAN is normal for CSEL which a lot of autopilots can use/follow. When I look it up in the F18 manual. I don't see any slaving. :( Link to comment Share on other sites More sharing options...
NineGravity Posted June 7, 2018 Share Posted June 7, 2018 Here is a quick pic I took to show someone else about how to use this. I was using the ATC and heading select when being lazy sightseeing.:) Thanks,I can now drink a coffee while flying!:megalol: Link to comment Share on other sites More sharing options...
Dejjvid Posted June 7, 2018 Share Posted June 7, 2018 Semi related, when I toggle CRS nothing happens (except) CSEL in UFC. But nothing changes in the AMPCD. I tried inputting a course, the number flashes in UFC then disappear and nothing happens. Probably forgot something simple. i7 8700K | GTX 1080 Ti | 32GB RAM | 500GB M.2 SSD | TIR5 w/ Trackclip Pro | TM Hotas Warthog | Saitek Pro Flight Rudder [sigpic]http://www.132virtualwing.org[/sigpic] Link to comment Share on other sites More sharing options...
Thermal Posted June 7, 2018 Share Posted June 7, 2018 CSEL works for TACAN right now, not sure about other navigation modes. Link to comment Share on other sites More sharing options...
Rowan Posted June 7, 2018 Share Posted June 7, 2018 I use the csel to help line up the runway for landing, quite helpful, especially at night, it's the only use I have found for it so far. Link to comment Share on other sites More sharing options...
Alleluia Posted June 7, 2018 Share Posted June 7, 2018 you need to have a point selected, either an active tacan or a waypoint in order to have csel doing something. For that you need to have TCN or WPT boxed on the hsi vgruk.com Link to comment Share on other sites More sharing options...
kreisch Posted June 7, 2018 Share Posted June 7, 2018 Csel only draws a line guys, this will not control your plane ;) Gesendet von meinem F5121 mit Tapatalk Ugly-Squadron GamestarPinboard Link to comment Share on other sites More sharing options...
Shadoga Posted June 7, 2018 Share Posted June 7, 2018 You have to set the HSI scale to a value so that the selested TACAN station symbol is visible within your HSI scale range. If the TACAN symbol is not visible (scale too small), the course arrow will not appear on the screen. Link to comment Share on other sites More sharing options...
TonyG Posted June 7, 2018 Share Posted June 7, 2018 We are missing CPL, coupled steering mode, which will couple the autopilot to the selected waypoint or tacan signal. Link to comment Share on other sites More sharing options...
fitness88 Posted June 7, 2018 Share Posted June 7, 2018 I've mapped both heading and course select to my joystick and it makes it so much easier as they will start to move rapidly after a few seconds of hold down. Link to comment Share on other sites More sharing options...
poochies Posted June 7, 2018 Share Posted June 7, 2018 Here is a quick pic I took to show someone else about how to use this. I was using the ATC and heading select when being lazy sightseeing.:) How do you use automatic throttle control ? Link to comment Share on other sites More sharing options...
Revelation Posted June 7, 2018 Share Posted June 7, 2018 How do you use automatic throttle control ? There is a button on the Hornet HOTAS for that function, look in the control list under HOTAS and assign the button. From there you simply depress the button at the desired speed and, with little variation, will maintain the desired speed. Win 10 Pro 64Bit | 49" UWHD AOC 5120x1440p | AMD 5900x | 64Gb DDR4 | RX 6900XT Link to comment Share on other sites More sharing options...
poochies Posted June 7, 2018 Share Posted June 7, 2018 Aweomse thanks for the help thought it would be more involved than that, I'm on the road using a game pad and these micro throttle changes to keep that damn AOA perfect on carrier landings is near impossible ! Hopefully ATC helps, but I don't think of it as cheating using a gamepad :-) Link to comment Share on other sites More sharing options...
fitness88 Posted June 7, 2018 Share Posted June 7, 2018 I think ATC will come into more efficient use once F18 is updated to allow for waypoint steering and auto carrier landing. Currently my throttle/speed stays fairly constant when flying from point "A" to "B". Link to comment Share on other sites More sharing options...
ebabil Posted June 10, 2018 Share Posted June 10, 2018 instead of clicking and holding the heading switch, can i enter desired heading directly to ufc? if yes how? can i do it also for course sel? FC3 | UH-1 | Mi-8 | A-10C II | F/A-18 | Ka-50 III | F-14 | F-16 | AH-64 | Mi-24 | F-5 | F-15E| F-4| Tornado Persian Gulf | Nevada | Syria | NS-430 | Supercarrier // Wishlist: CH-53 | UH-60 Youtube MS FFB2 - TM Warthog - CH Pro Pedals - Trackir 5 Link to comment Share on other sites More sharing options...
ebabil Posted June 10, 2018 Share Posted June 10, 2018 thanks FC3 | UH-1 | Mi-8 | A-10C II | F/A-18 | Ka-50 III | F-14 | F-16 | AH-64 | Mi-24 | F-5 | F-15E| F-4| Tornado Persian Gulf | Nevada | Syria | NS-430 | Supercarrier // Wishlist: CH-53 | UH-60 Youtube MS FFB2 - TM Warthog - CH Pro Pedals - Trackir 5 Link to comment Share on other sites More sharing options...
snowsniper Posted November 5, 2018 Share Posted November 5, 2018 Hi all HSEL works nicely a free flight mission. but once I touch something like FCS / Bit test / or just trim it doesn't work anymore. and didn't find any way so far to make it work again in same flight . ? anyone know how to reset it ? i7-10700KF CPU 3.80GHz - 32 GO Ram - - nVidia RTX 2070 - SSD Samsung EVO with LG TV screen 40" in 3840x2150 - cockpit scale 1:1 - MS FFB2 Joystick - COUGAR F16 throttle - Saitek Pro Flight Rudder Pedals Link to comment Share on other sites More sharing options...
Recommended Posts