BlackLibrary Posted October 26, 2018 Share Posted October 26, 2018 (edited) I cant find any problems Edited October 27, 2018 by BlackLibrary aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
ArturDCS Posted October 27, 2018 Author Share Posted October 27, 2018 OK, I made it a release. Thanks. I cant find ans problems DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
emc Posted November 8, 2018 Share Posted November 8, 2018 Hi, I have all three panels Switch (PZ55), Radio (PZ69) and Multi (PZ70). Basicly its working, I found profiles and load them. Lastly I bought Multi Panel. And I'm not sure if LCD is working, how can I check it in game or in DCSFlightPanel. I'm asking because original tools from Logitech for panels which check all LEDs, switches, etc. For radio all digits passing from right to left but for Multi Panel it just make LCD a little bit bright but no any digits.... how to force LCD to show some digits or letters in both rows Please help me, only few days left to return it to shop without paying.... Take a look my mods CPU: i7 7700 | GPU: GeForce GTX 1080 8GB DDR5 | Motherboard: ASUSTeK PRIME B250M-A | RAM: 2x16GB DDR4-2400 | Output: Kingston HyperX Cloud II | Edifier C2XD 2.1 | Controlls: Saitek X-56 Rhino | Saitek Flight Rudder Pedals | Saitek Multi/Radio/Switch Panels | Thrustmaster MFD Cougar | Elgato Stream Deck XL | OpenTrack with LaserClip | VoiceAttack with VAICOM Pro plugin Link to comment Share on other sites More sharing options...
pdmarsh Posted November 8, 2018 Share Posted November 8, 2018 @emc -- In order to see if the displays are working on the Multi Panel, you have to configure them with DCS-BIOS commands. Please refer to the video tutorials listed in the first post on this thread. The second tutorial explains how to use DCS-BIOS commands. Paul [sIGPIC][/sIGPIC] DCSFlightpanels - Utility for Saitek Pro Flight Panels for DCS World Custom Saitek B.I.P. Tiles for DCSFlightpanels Saitek Switch Panel Template for DCSFlightpanels Link to comment Share on other sites More sharing options...
BaD CrC Posted November 8, 2018 Share Posted November 8, 2018 And also emc, the multi panel is using a bit more power than the others and sometimes, windows 10 is automatically setting the USB ports in energy saving mode that disabling the display. So you have to make sure this power saving mode is disabled for your multi panel. https://www.blacksharkden.com http://discord.gg/blacksharkden Link to comment Share on other sites More sharing options...
ArturDCS Posted November 8, 2018 Author Share Posted November 8, 2018 And also emc, the multi panel is using a bit more power than the others and sometimes, windows 10 is automatically setting the USB ports in energy saving mode that disabling the display. So you have to make sure this power saving mode is disabled for your multi panel. Which can be done via DCSFP. DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
emc Posted November 8, 2018 Share Posted November 8, 2018 Which can be done via DCSFP. Can you tell how? Take a look my mods CPU: i7 7700 | GPU: GeForce GTX 1080 8GB DDR5 | Motherboard: ASUSTeK PRIME B250M-A | RAM: 2x16GB DDR4-2400 | Output: Kingston HyperX Cloud II | Edifier C2XD 2.1 | Controlls: Saitek X-56 Rhino | Saitek Flight Rudder Pedals | Saitek Multi/Radio/Switch Panels | Thrustmaster MFD Cougar | Elgato Stream Deck XL | OpenTrack with LaserClip | VoiceAttack with VAICOM Pro plugin Link to comment Share on other sites More sharing options...
whiteside Posted November 9, 2018 Share Posted November 9, 2018 Hi folks, how do I find the correct path for my DCS-Bios json folder location? Thank you. Looking forward to using this program! i9-9900K 3.6(Running at 5.0 GHZ) 32GB Memory 2x M.2 drives Win 10 64bit RTX 2080 Ti FTW3 Ultra OCULUS RIFT CV1 VKB Gunfighter 2 extended/TM Pedals/TM Warthog throttles. Link to comment Share on other sites More sharing options...
BlackLibrary Posted November 9, 2018 Share Posted November 9, 2018 @ emc : this is under Options/USB Power management. (you need to run Flightpanels for this a admin) @whiteside: \DCS-BIOS\doc\json aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
emc Posted November 9, 2018 Share Posted November 9, 2018 Hi folks, how do I find the correct path for my DCS-Bios json folder location? <user-folder>\Saved Games\DCS.openbeta\Scripts\DCS-BIOS\doc\json Take a look my mods CPU: i7 7700 | GPU: GeForce GTX 1080 8GB DDR5 | Motherboard: ASUSTeK PRIME B250M-A | RAM: 2x16GB DDR4-2400 | Output: Kingston HyperX Cloud II | Edifier C2XD 2.1 | Controlls: Saitek X-56 Rhino | Saitek Flight Rudder Pedals | Saitek Multi/Radio/Switch Panels | Thrustmaster MFD Cougar | Elgato Stream Deck XL | OpenTrack with LaserClip | VoiceAttack with VAICOM Pro plugin Link to comment Share on other sites More sharing options...
emc Posted November 9, 2018 Share Posted November 9, 2018 @ emc : this is under Options/USB Power management. (you need to run Flightpanels for this a admin) thx... I will check later btw I return (it was last day 14 after buy, without question or any cause) multi panel I waiting for new, see what happend Take a look my mods CPU: i7 7700 | GPU: GeForce GTX 1080 8GB DDR5 | Motherboard: ASUSTeK PRIME B250M-A | RAM: 2x16GB DDR4-2400 | Output: Kingston HyperX Cloud II | Edifier C2XD 2.1 | Controlls: Saitek X-56 Rhino | Saitek Flight Rudder Pedals | Saitek Multi/Radio/Switch Panels | Thrustmaster MFD Cougar | Elgato Stream Deck XL | OpenTrack with LaserClip | VoiceAttack with VAICOM Pro plugin Link to comment Share on other sites More sharing options...
BlackLibrary Posted November 9, 2018 Share Posted November 9, 2018 i had the same problem. with power management off it works as it should aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
emc Posted November 9, 2018 Share Posted November 9, 2018 indeed i had faulty unit, after replace it is working. BTW when I run DCSFilightPanels as admin and try disable power saving still got message I need admin right to do that, it is normal. After that other window appear to plug out and in all saitek devices. Take a look my mods CPU: i7 7700 | GPU: GeForce GTX 1080 8GB DDR5 | Motherboard: ASUSTeK PRIME B250M-A | RAM: 2x16GB DDR4-2400 | Output: Kingston HyperX Cloud II | Edifier C2XD 2.1 | Controlls: Saitek X-56 Rhino | Saitek Flight Rudder Pedals | Saitek Multi/Radio/Switch Panels | Thrustmaster MFD Cougar | Elgato Stream Deck XL | OpenTrack with LaserClip | VoiceAttack with VAICOM Pro plugin Link to comment Share on other sites More sharing options...
BlackLibrary Posted November 9, 2018 Share Posted November 9, 2018 yes i hab the same message in that window on the bottom it writes that x of y devices are changed/Powersave off) short: its all fine and your devices should now work without any problems. (from the windows side ;) ) aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
whiteside Posted November 10, 2018 Share Posted November 10, 2018 Thanks got it! Works great. Does anyone make a hook handle to replace the gear handle on a pz55? i9-9900K 3.6(Running at 5.0 GHZ) 32GB Memory 2x M.2 drives Win 10 64bit RTX 2080 Ti FTW3 Ultra OCULUS RIFT CV1 VKB Gunfighter 2 extended/TM Pedals/TM Warthog throttles. Link to comment Share on other sites More sharing options...
BlackLibrary Posted November 10, 2018 Share Posted November 10, 2018 Does anyone make a hook handle to replace the gear handle on a pz55? i search too to replace the handle with a hook. :thumbup: aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
ron533 Posted November 10, 2018 Share Posted November 10, 2018 Hi, Sometimes I cant get the panel working (BIP panel mainly) especially when alt tabbing or switching planes, and profiles. I try to close FP and run it again, reloading the profile ...but nothing. Only solution is to close DCS and run it again. Any correct order or things to do to make it run robustly in these situations? Thanks! Callsign SETUP Link to comment Share on other sites More sharing options...
ArturDCS Posted November 11, 2018 Author Share Posted November 11, 2018 New pre-release here. New profile introduced FC3_CD_SRS This profile is meant for FC3 and includes the Common Data portion of DCS-BIOS and SRS. Warlord has made changes to DCS-BIOS that you can get common data from DCS-BIOS such as heading and altitude. Remember to install latest DCS-BIOS. There are A LOT of changes under the hood in DCSFP, changes so that new functionality will be easier to take into use. Because of this there is for sure some bugs. Please report them! DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
ArturDCS Posted November 11, 2018 Author Share Posted November 11, 2018 Hi, Sometimes I cant get the panel working (BIP panel mainly) especially when alt tabbing or switching planes, and profiles. I try to close FP and run it again, reloading the profile ...but nothing. Only solution is to close DCS and run it again. Any correct order or things to do to make it run robustly in these situations? Thanks! Are you using the BIP with DCS-BIOS or are they configured based on switches? (or both) DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
ArturDCS Posted November 11, 2018 Author Share Posted November 11, 2018 indeed i had faulty unit, after replace it is working. BTW when I run DCSFilightPanels as admin and try disable power saving still got message I need admin right to do that, it is normal. After that other window appear to plug out and in all saitek devices. Yes it is normal. I don't check whether you are actually admin when executing that function. DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
ron533 Posted November 11, 2018 Share Posted November 11, 2018 Are you using the BIP with DCS-BIOS or are they configured based on switches? (or both) I'm using BIP with DCS-BIOS. (And I already have the USB power management disabled). Callsign SETUP Link to comment Share on other sites More sharing options...
ArturDCS Posted November 12, 2018 Author Share Posted November 12, 2018 (edited) Hi, Sometimes I cant get the panel working (BIP panel mainly) especially when alt tabbing or switching planes, and profiles. I try to close FP and run it again, reloading the profile ...but nothing. Only solution is to close DCS and run it again. Any correct order or things to do to make it run robustly in these situations? Thanks! So restarting DCSFP doesn't help? That seems like the DCS-BIOS export somehow gets broken (if you need to restart DCS). Has anyone else experienced DCS-BIOS not working in DCSFP when switching planes or using ALT + TAB? Btw, when this happens, check your dcs.log and dcs-bios.log (C:\Users\<username>\Saved Games\DCS\Logs), are there any problems there pointing to DCS-BIOS? Edited November 12, 2018 by ArturDCS DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
ArturDCS Posted November 12, 2018 Author Share Posted November 12, 2018 I updated yesterdays release. DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
BaD CrC Posted November 18, 2018 Share Posted November 18, 2018 Artur, I keep having the ALT key identified in DCSFP as a LMENU key. So any combination like LSHIFT+LALT+V doesn't work. Do you have something like this? https://www.blacksharkden.com http://discord.gg/blacksharkden Link to comment Share on other sites More sharing options...
ArturDCS Posted November 18, 2018 Author Share Posted November 18, 2018 Artur, I keep having the ALT key identified in DCSFP as a LMENU key. So any combination like LSHIFT+LALT+V doesn't work. Do you have something like this? Look @ 11:40. DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
Recommended Posts