Ironhand Posted November 8, 2018 Share Posted November 8, 2018 Latest update installed. The AP has no difficulty neutralizing rudder and stabilizer trim (to use the terminology from the DCS manual). However, it is unable to do so with aileron trim. The trim is continually reset throughout the speed range, though it's hardly noticable in the cockpit until the stick starts shimmying from side to side at around 550 km/h IAS. By around 750 IAS the required readjustments are sufficiently large to cause the indicator lamp to blink on and off and cockpit shake becomes noticable. Track attached. After trimming for slow speed, level flight AP attitude hold is engaged followed by baro-hold. Speed is then gradually increased through 1000 k/h IAS.MiG-29 AP Shimmy2.trk YouTube Channel: https://www.youtube.com/channel/UCU1...CR6IZ7crfdZxDg _____ Win 10 Pro x64, ASUS Z97 Pro MoBo, Intel i7-4790K, EVGA GTX 970 4GB, HyperX Savage 32GB, Samsung 850 EVO 250 GB SSD, 2x Seagate Hybrid Drive 2TB Raid 0. Link to comment Share on other sites More sharing options...
IvanK Posted November 8, 2018 Share Posted November 8, 2018 This has been in the Master Bug list for a while still yet to be completely fixed Link to comment Share on other sites More sharing options...
Ironhand Posted November 8, 2018 Author Share Posted November 8, 2018 This has been in the Master Bug list for a while still yet to be completely fixed Ok. Thanks. Nothing like reporting the obvious, I guess. YouTube Channel: https://www.youtube.com/channel/UCU1...CR6IZ7crfdZxDg _____ Win 10 Pro x64, ASUS Z97 Pro MoBo, Intel i7-4790K, EVGA GTX 970 4GB, HyperX Savage 32GB, Samsung 850 EVO 250 GB SSD, 2x Seagate Hybrid Drive 2TB Raid 0. Link to comment Share on other sites More sharing options...
Recommended Posts