Alphamale Posted December 22, 2018 Share Posted December 22, 2018 The real way is of course, making the waypoint from the jtac instructions. I'm just too lazy, but I'll give it a go one day :) Now when you say "making the waypoint from the JTAC instructions" why would the pilot have to input numbers at all? Shouldn't that be entered by the lasing platform, or at the very least, sent to the pilot's ordinance computer so there's no misunderstanding from audible remarks? Link to comment Share on other sites More sharing options...
Chopper A-10 Posted December 22, 2018 Share Posted December 22, 2018 Another good video and he posted his mission to use . . the more Missions you acquire the more you learn on how they are created by others . . that was my learning curve. i7-7700K 4.20Ghz | GeForce GTX 1080Ti DUKE | ASUS Maximus IX Hero Z270 | Samsung 960 | Corsair CPU Cooler | G.SKILL 32GB | Oculus VR Rift | Saitek PRO Pedals & TM HOTAS Warthog Throttle & Joystick | Link to comment Share on other sites More sharing options...
Tj1376 Posted December 22, 2018 Share Posted December 22, 2018 Now when you say "making the waypoint from the JTAC instructions" why would the pilot have to input numbers at all? Shouldn't that be entered by the lasing platform, or at the very least, sent to the pilot's ordinance computer so there's no misunderstanding from audible remarks? I believe in a real tactile employment you’d always enter the numbers. It’s a check and balance system. FAC reads coordinates, you input them. Slew pod to coordinates. Verify target. Target lazed. Verify the laser spot is the target discussed in the nine line, which matches the coordinates input. I believe the idea is to then give the pilot the ability to double check the FACs work and make sure everyone is talking about the same target. Less chance for folks to drop ordinance on the wrong grey Toyota. Or wrong white square house. Even in the a10c this same methodology is followed, even if the FAC just electronically pushed the target to the a10. I don’t honestly know if our early lot 20 f18 has that same capability. The piece that I still think you think is missing is the tpod (called atflir.)Without it, you’re not putting a laser spot on the hud. You’re not getting a designate diamond on the hud. You’re not verifying your target. And you’re not getting CCRP guidance. That makes the employment of GBUs on the f18 tedious at best and to your point, not much different than a CCIP mark 82. However, I do have some awesome 25k feet 14-16 mile gbu tosses that strike their target- that’s something you can’t easily do with a mark 82. TJ Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Tj1376 Posted December 22, 2018 Share Posted December 22, 2018 (edited) How do I use LGBs? Another good video and he posted his mission to use . . the more Missions you acquire the more you learn on how they are created by others . . that was my learning curve. I haven’t downloaded the file, but from the first ten seconds of the video clip he appears to be using a predator to laze. We’ve already proven that the predator does work type2- it’s the other type 2 capable ground units that seem to have lost their ability to laze causing the confusion. Edit: I’ve now watched the entire video. Predator to laze and he does a true ccip delivery of the gbu onto the target (he puts the ccip pipper over the target and pickles.) It could have been mark 82s and he would have hit that target. TJ Sent from my iPhone using Tapatalk Edited December 22, 2018 by Tj1376 Link to comment Share on other sites More sharing options...
Alphamale Posted December 22, 2018 Share Posted December 22, 2018 (edited) I believe in a real tactile employment you’d always enter the numbers. It’s a check and balance system. FAC reads coordinates, you input them. Slew pod to coordinates. Verify target. Target lazed. Verify the laser spot is the target discussed in the nine line, which matches the coordinates input. I believe the idea is to then give the pilot the ability to double check the FACs work and make sure everyone is talking about the same target. Less chance for folks to drop ordinance on the wrong grey Toyota. Or wrong white square house. Even in the a10c this same methodology is followed, even if the FAC just electronically pushed the target to the a10. I don’t honestly know if our early lot 20 f18 has that same capability. The piece that I still think you think is missing is the tpod (called atflir.)Without it, you’re not putting a laser spot on the hud. You’re not getting a designate diamond on the hud. You’re not verifying your target. And you’re not getting CCRP guidance. That makes the employment of GBUs on the f18 tedious at best and to your point, not much different than a CCIP mark 82. However, I do have some awesome 25k feet 14-16 mile gbu tosses that strike their target- that’s something you can’t easily do with a mark 82. TJ Sent from my iPhone using Tapatalk Ok, so you're saying we can see the "guidance" part of this, more with Lofting than with a straight flyover? Is that correct? Is there a true LOFT mode on the F18 with pull up indicator and release bar? Like the Tornado? Edited December 22, 2018 by Alphamale Link to comment Share on other sites More sharing options...
Tj1376 Posted December 22, 2018 Share Posted December 22, 2018 Ok, so you're saying we can see the "guidance" part of this, more with Lofting than with a straight flyover? Is that correct? Is there a true LOFT mode on the F18 with pull up indicator and release bar? Like the Tornado? Negative. I’m learning the f18 too, but as of this moment I am unaware of ANY guidance for a guided bomb drop. It will come when we pickup atflir but as of now, gbus are employed with a “best guess” of how to drop. TJ Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Alphamale Posted December 22, 2018 Share Posted December 22, 2018 Ok, well then for now, I'll just let the LGBs "age" a bit Link to comment Share on other sites More sharing options...
bfr Posted December 22, 2018 Share Posted December 22, 2018 Negative. I’m learning the f18 too, but as of this moment I am unaware of ANY guidance for a guided bomb drop. It will come when we pickup atflir but as of now, gbus are employed with a “best guess” of how to drop. TJ Sent from my iPhone using Tapatalk That's my experience of it too. The test scenario I had involved using a Predator as FAC and then flying in the rough direction of the target and releasing when I guesstimated it'd be about close enough for the bombs to reach. Run this same scenario numerous times now with all the GBU variants and my hit rate is pretty much 100%. Link to comment Share on other sites More sharing options...
macedk Posted December 22, 2018 Share Posted December 22, 2018 104th guys are killing it by using a maverick as laser locator :) OS: Win10 home 64bit*MB: Asus Strix Z270F/ CPU: Intel I7 7700k /Ram:32gb_ddr4 GFX: Nvidia Asus 1080 8Gb Mon: Asus vg2448qe 24" Disk: SSD Stick: TM Warthog #1400/Saitek pro pedals/TIR5/TM MFDs [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Tj1376 Posted December 23, 2018 Share Posted December 23, 2018 Ok, well then for now, I'll just let the LGBs "age" a bit This employment isnt perfect by any stretch of the imagination. And to be right honest, I imagine that the real employment wouldnt work this way (you'll notice I dont designate the waypoint as my target (on purpose, I DO NOT want guidance and the restrictions that come from that guidance) - however, as you can see its really effective to "toss" the GBU at 13-16 miles out and let the laser do the rest. And yes, you'll notice that after the first four bombs come off I forgot to update the laser code to 1688 for the rest of the bombs so one misses. Folder with Track and Mission Yes- I opted to use CTLD for the lazing as I grew quite irritated at the limitations of the DCS JTAC, as well as how slow it took to employ - that JTAC is still present though (invincible, invisible drone flying over head), so feel free to use it if you prefer that approach. He is on 264 which is set as radio 1 comm 1. TJ Link to comment Share on other sites More sharing options...
Alphamale Posted December 23, 2018 Share Posted December 23, 2018 This employment isnt perfect by any stretch of the imagination. And to be right honest, I imagine that the real employment wouldnt work this way (you'll notice I dont designate the waypoint as my target (on purpose, I DO NOT want guidance and the restrictions that come from that guidance) - however, as you can see its really effective to "toss" the GBU at 13-16 miles out and let the laser do the rest. And yes, you'll notice that after the first four bombs come off I forgot to update the laser code to 1688 for the rest of the bombs so one misses. Folder with Track and Mission Yes- I opted to use CTLD for the lazing as I grew quite irritated at the limitations of the DCS JTAC, as well as how slow it took to employ - that JTAC is still present though (invincible, invisible drone flying over head), so feel free to use it if you prefer that approach. He is on 264 which is set as radio 1 comm 1. TJ Hey, thanks TJ :) Link to comment Share on other sites More sharing options...
Fonz_408 Posted December 24, 2018 Share Posted December 24, 2018 (edited) Watch im having no problems with Mav or LGB I will say, ive my mini stick on my X52pro set as slew with keyboard bindings and its nice a smooth. Edited December 24, 2018 by Fonz_408 Acer Predator 500 Laptop i7 8750 @ 3.9MHz /16GB DD4 / GTX1070 / 256 SSD Youtube https://www.youtube.com/channel/UC3FtEcJlj_34i3IVqx6pE_w?view_as=subscriber Link to comment Share on other sites More sharing options...
kurtz667 Posted December 24, 2018 Share Posted December 24, 2018 It should be the same thing. You select wypt then select wypt 1. Then when you press weapon designate, all you’re doing is slaving the weapons/release parameters to that waypoint. You can do this with any waypoint. Hint: that’s why you should be careful when setting altitudes in the ME for each waypoint. You will unintentionally put your waypoint in the air. And yes the hornet will release accordingly to have the bomb go through that midair waypoint. That’s why it is imperative to check the waypoint elevation when using waypoint/weapon designate. You can fix it in game through waypoint manipulation. Sent from my iPhone using Tapatalk Pro Aah that makes sense, thanks! Spoiler Modules: FC3, KA-50, MIG-21, F-18, F-14, UH-1H, Spitfire, F-5E, A-10c II, A-4E, SC, F-16, CA, M2000c, BF-109K-4, Mi-24P Terrains:Nevada, Persian gulf, Normandy + Asset pack, Syria PC setup:I7 8700k, 32g ram, m2 ssd, gtx 1080ti, Warthog TM, MFG crosswind, Playseat Air Force, Reverb G2 Link to comment Share on other sites More sharing options...
Chewbacca77 Posted August 18, 2019 Share Posted August 18, 2019 I solved the GBU issue for me and i think i found a bug, but probalby its already known. I couldnt hit anything with the GBU12 with JTAC lasing a truck. The bomb just did a free fall not picking up the laser. The solution came when i used the laser guided maverick. I found out that the JTAC was not lasing the truck set in Mission Editor (watch the screenshot). I set the JTAC to lase the first truck in the column, on the top of the cross if you want, i always threw my gbu there and it found nothing. Indeed the Jtac was lasing the last truck, visible in the green circle. I dont know how it is with a single target but in this case the JTAC just picked the opposite end of the column for some reason. Any explanations? Do i miss something? You can clearly see that the laser is set to the first upper truck. Link to comment Share on other sites More sharing options...
Willie Nelson Posted November 3, 2019 Share Posted November 3, 2019 I solved the GBU issue for me and i think i found a bug, but probalby its already known. I couldnt hit anything with the GBU12 with JTAC lasing a truck. The bomb just did a free fall not picking up the laser. The solution came when i used the laser guided maverick. I found out that the JTAC was not lasing the truck set in Mission Editor (watch the screenshot). I set the JTAC to lase the first truck in the column, on the top of the cross if you want, i always threw my gbu there and it found nothing. Indeed the Jtac was lasing the last truck, visible in the green circle. I dont know how it is with a single target but in this case the JTAC just picked the opposite end of the column for some reason. Any explanations? Do i miss something? You can clearly see that the laser is set to the first upper truck. I know this question was a while ago but I’m also getting to grips with Laser guided bombs now, when I’m not using the litening pod, how do I know that the bomb can see the laser? i7700k OC to 4.8GHz with Noctua NH-U14S (fan) with AORUS RTX2080ti 11GB Waterforce. 32GDDR, Warthog HOTAS and Saitek rudders. HP Reverb. Link to comment Share on other sites More sharing options...
Tholozor Posted November 4, 2019 Share Posted November 4, 2019 There's no sure-fire way to knowing if the LGB picked up the laser or not without spectating the bomb and watching to see if it goes to bang-bang guidance. Otherwise it's pickle and pray. REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/ Link to comment Share on other sites More sharing options...
Harker Posted November 4, 2019 Share Posted November 4, 2019 I know this question was a while ago but I’m also getting to grips with Laser guided bombs now, when I’m not using the litening pod, how do I know that the bomb can see the laser?There's no indicator for that. Make sure that you release the bomb following a good profile and that your target won't be obscured by anything for as long as you need to lase it. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Willie Nelson Posted November 5, 2019 Share Posted November 5, 2019 Ok thanks people. Odd system design isn’t it especially given what would be at stake in that sort of environment. Anyway thanks. i7700k OC to 4.8GHz with Noctua NH-U14S (fan) with AORUS RTX2080ti 11GB Waterforce. 32GDDR, Warthog HOTAS and Saitek rudders. HP Reverb. Link to comment Share on other sites More sharing options...
will- Posted November 5, 2019 Share Posted November 5, 2019 they are still working on it. so WIP. im sure once we get a A/G working radar, HMCS it will change again. Intel i9-9900K 32GB DDR4, RTX 2080tiftw3, Windows 10, 1tb 970 M2, TM Warthog, 4k 144hz HDR g-sync. Link to comment Share on other sites More sharing options...
Recommended Posts