Ducksen Posted February 22, 2020 Share Posted February 22, 2020 Hi quick post. In open beta in VR my frames droped to half. In the main DCS menu I have had 90 frames. Now it is 45. The same goes for ingame. I normally had 30 frames and now it is 10-15 frames. Now I feel sick and green, and it has become unplayable. Using HTC Vive. Nvidia 1080, 32Gb RAM, Skylake 6700 i7 4GHz. Have set most settings in DCS to lowest setting and turned off all MSAA, depth of field, SSAA, SSLR etc etc etc. Have turned game mode off in windows. Have Enabled my Nvidia 1080 card to have full power available in Nvidia settings. And more... Hope to see a fix for this performance hit. Or if I am the only one, please give me advice. I CAN go lower on settings, but to me it seems not to be the core issue here. Link to comment Share on other sites More sharing options...
YoYo Posted February 22, 2020 Share Posted February 22, 2020 (edited) Yep. 2.5.6 I think wasnt be tested by ANY beta testers in VR :(. FPS drop in this patch, for 2.5.5 was ok for me and stable 45 fps with motion reprojection ON. The same settings than in 2.5.5 - now DCS is unplayable :/ in VR. Also clouds are randering in the one eye (some clouds on horizont), strange text "Static1" also on the top of picture (what is it?). Edited February 22, 2020 by YoYo Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 4090 24Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro Link to comment Share on other sites More sharing options...
Ducksen Posted February 22, 2020 Author Share Posted February 22, 2020 The static 1 is the unit that DCS uses as a background when selecting a slot or aircraft. If you remove that static from the mission then it defaults to something else like a tank or anything, and the text is gone. Don't get me wrong, the text up in the top that states static 1 is a bug for sure, but until a patch comes for this that is a workaround. Link to comment Share on other sites More sharing options...
Eagle_01 Posted February 22, 2020 Share Posted February 22, 2020 +1 Even with the shaders mod. FPS dropped. But still playable for me. I7 7700, 16gb RAM, 2070 Super Intel Core i7 7700, 16GB DDR4 RAM, Intel 660P PCIe NVMe, Zotac 2070 Super Amp, Oculus Rift S A-10C, FA-18C, F-14B, FC3, F-5E, F-86, AV8B, M-2000, Combined Arms, AJS37, F-16C, C-101, MiG-15Bis, MiG-19P, MiG-21Bis, L-39, P-51D, Spitfire LFMkIX, Bf-109, Fw-190 Dora, Fw-190 Anton, P-47D, I-16, SA342, Mi-8MTV2, UH-1H, Ka-50 Link to comment Share on other sites More sharing options...
Reflected Posted February 22, 2020 Share Posted February 22, 2020 Not only in VR. Facebook Instagram YouTube Discord Link to comment Share on other sites More sharing options...
Ducksen Posted February 22, 2020 Author Share Posted February 22, 2020 It helps to set terrain detail to low. The wierd part that it helps in the DCS menu. I went from 45 to 90 fps in the menu screen by doing this. How odd. Just a tip and hint while waiting for fix. Link to comment Share on other sites More sharing options...
YoYo Posted February 22, 2020 Share Posted February 22, 2020 It helps to set terrain detail to low. Terrain to LOW? No any option like this. You can set up Visib Range or Terrain textures. Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 4090 24Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro Link to comment Share on other sites More sharing options...
Ducksen Posted February 22, 2020 Author Share Posted February 22, 2020 Terrain textures to low... :doh: Link to comment Share on other sites More sharing options...
wilbur81 Posted February 23, 2020 Share Posted February 23, 2020 (edited) Yep. 2.5.6 I think wasnt be tested by ANY beta testers in VR :(. FPS drop in this patch... Not just VR. They must not be doing much testing with 4K monitors either. :( 2.5.6 in 2D (with any moderate amount of units) is a pretty bad drop in performance. I've never reverted back to a version since 2003 when I began with Lomac. I'm probably going back to 2.5.5 until they get things sorted out. I don't have $1000.00 to drop on a new GPU and my 1070 SC isn't exactly low-low end either. Edited February 23, 2020 by wilbur81 i7 8700K @ Stock - Win10 64 - 32 RAM - RTX 3080 12gb OC - 55 inch 4k Display Link to comment Share on other sites More sharing options...
Kazansky222 Posted February 24, 2020 Share Posted February 24, 2020 Yea same problem with me as well boys, performance dropped by half with the pimax 5k+ and a 1080ti. The game is unplayable in both SP and MP regardless of settings. Now this wouldn't be a huge problem if I played vs AI, but I only fly in MP pvp, so I can't revert. I'll give it a week or two but I don't have alot of empty SSD space, if DCS doesn't run then its getting deleted for something else. [sIGPIC][/sIGPIC] 64th "Scorpions" Aggressor Squadron Discord: 64th Aggressor Squadron TS: 195.201.110.22 Link to comment Share on other sites More sharing options...
DarkClown Posted February 24, 2020 Share Posted February 24, 2020 Just wanted to add my +1 to poor performance in VR. Can no longer maintain above 45fps. At least VR zoom is fixed for PiMax, hopefully not related Processor: i7-8700K CPU @ 5.1GHz (OC) Memory: 16384MB RAM DDR 4266 Card name: NVIDIA GeForce RTX 2080TI FE VR: PiMax 5K+ HDD: Samsung SSD 960 EVO HDD: WD SSD WDS100T2B0A-00SM50 Link to comment Share on other sites More sharing options...
Gryzor Posted February 24, 2020 Share Posted February 24, 2020 Please devs fix asap or at least return performance levels of 2.5.5. Downgrade is not acceptable in my opinion, specially performance drops of a -60% level Link to comment Share on other sites More sharing options...
SpeedStick Posted February 24, 2020 Share Posted February 24, 2020 Yeah I agree. I didnt see as many servers in the list so I thought that it was fixed and everyone had gotten back to new version. Unfortunately there is something weird going on hitting the fps in a big way. Honestly cant be arsed to download like 30Gb for a thrid time. Hopefully they'll fix it quick. "Hard to imagine bigger engine. its got a beautiful face and an arse built like sputnik." - Pikey AKA The Poet, on 37 Viggen. Link to comment Share on other sites More sharing options...
Cskelly Posted February 25, 2020 Share Posted February 25, 2020 No good with taxing after land FPS 11-15 in VR quick system notes I7-7700K @4.6 ASUS 1080 32GB RAM Link to comment Share on other sites More sharing options...
RampantCoyote Posted February 25, 2020 Share Posted February 25, 2020 Just adding to the chorus here. Pimax 5K+ with a 2080Ti. Was pushing 45 FPS before the 2.5.6 patch, and now I'm normally down to around 25 even after lowering my visual quality, and around 14 on the ground at an airbase. It's really, really bad. Slightly higher framerates in the FC3 aircraft, BTW. I don't know if it's the lighting or passes inside the more complex modern cockpits, but I could get up into the mid-30s in the A-10A. Still bad by comparison, but much more playable. Link to comment Share on other sites More sharing options...
redtop012000 Posted February 26, 2020 Share Posted February 26, 2020 Near miss I use Oculus Rift S on a PC with Intel 9900K, Evo M2 SSD and 1070Ti. My initial search was for how to remove the On Screen text Main: Static1 when in missions after I updated to 2.5.6. Looks like I will have to wait until there is an update to remove the bug unless someone knows where to change a config? I noticed plenty of messages regarding the slower frame rates after the 2.5.6. I spent hours trying different configurations in the firewall, real time scanning off, DCS settings with no joy. My credit card started to tremble as I looked at buying a 2080 super thinking this would solve my problems then the Corona Virus caused prices to rise and I backed off. Lucky for me the missus complained her Laptop was sluggish so when I looked into it I ended up removing her anti virus McAfee and her Laptop started performing normally. I then removed my PC's McAfee anti virus and hey presto my DCS is flying very smoothly although not quite back to 2.5.5. My benchmark was for a smooth frame rates, at night, flying over well lit cities. My in sim graphic setting is VR but Pixel Density is still 1.2 although I will intend to increase that. I installed Bitdender which has a Game profile in settings you can point to DCS. Not saying this works for everybody but worth a shot because it really has worked for me and my deep pockets. Link to comment Share on other sites More sharing options...
redtop012000 Posted February 26, 2020 Share Posted February 26, 2020 Why go back. Just dual install the Stable release 2.5.5. Link to comment Share on other sites More sharing options...
Quadg Posted February 26, 2020 Share Posted February 26, 2020 ground textures to low seems to work. in VR i cannot tell the difference. and i have turned dynamic cockpit shadows on for the first time in ages and it seems to be working well. which goes with the new lighting. i Have the new reflections setting off. gamma 1.5 its running and looking pretty good in the whirly birds. My Rig: AM5 7950X, 32GB DDR5 6000, M2 SSD, EVGA 1080 Superclocked, Warthog Throttle and Stick, MFG Crosswinds, Oculus Rift. Link to comment Share on other sites More sharing options...
Airasys Posted April 19, 2020 Share Posted April 19, 2020 FPS in Open Beta is cut by at least 50%??? Hey Guys, Just to confirm what others a seeing Open Beta performance has dropped by half? I use to get 45+ on high setting in wide FOV, after the update I am lucky if I see 21-23. I just purchased the JF-17 and I cant even think of trying to taxi even on the lowest settings. Could someone in QA please flag this issue? VR in Open Beta is not possible now :(. Thank you. Outta Missiles, Outta Bullets, Switching to Harsh Language! Link to comment Share on other sites More sharing options...
premo256 Posted April 19, 2020 Share Posted April 19, 2020 Hi, I also have problem with FPS using HTC Vive Cosmos since the last update. I tried to play the 2nd mission of the F/A-18C Hornet 1989 - Task Force Challenger campaign and FPS were lower by 50-60% and in some parts of the mission they dropped bellow 10 fps and the game was totally unplayable. I had to downgrade to 2.5.5 stable and the FPS are fine, but I don´t know how will I play the Supercarrier DLC. I have 7700K + RTX 2070 + 32GB RAM. Link to comment Share on other sites More sharing options...
DronevidsandFreedom Posted April 21, 2020 Share Posted April 21, 2020 I am having the same problem I used to get decent frames per second and now only flying a p51 with nothing on the map it's at about 20 fps what is funny is my graphics card in only at 20 percent load and not at 80 or 90 like it should be what is even funnier is when I pause the game my graphics card goes to 80 or 90 percent use and my frame rates go back to 40 fps I would like some advice. Link to comment Share on other sites More sharing options...
Niehorst Posted April 22, 2020 Share Posted April 22, 2020 same here! happens alway in MP and in very demanding SP missions like DCE or "island style", where half of the NATO air fleet takes off. I feel like this effect isn't that bad on caucasus map, but I can be wrong. Observing this for a quiet long time now. sometimes a reboot did help, some time ago. By now this won't help at all. I don't like seeing my 1600€ card chilling around while I almost watch single pictures trough my Index! I'm sure ED is aware of this simulation breaking issue! NZXT H400i case i9 9900k @ 4,9GHz (cooled by NZXT Kraken X62 4x140Fan - Push/Pull) Asus RoG Maximus XI Gene with 32GB G.Skill CL14 Samsung M.2 970Pro 1000GB ZOTAC RTX 2080ti Triple Fan 11GB 34" RoG Swift Curved TFT runs smooth like Beck's Gold :D HTC VIVE pro eYe (still freaking out!) Thrust Master HOTAS Warthog on MONSTERTECH table mounts 15cm Stick Extension + red spring by SAHAJ 8 (<-- love them) (TM F-18C ordered) TPR (Thrustmaster Pendular Rudder) T.Flight USAF Headset Link to comment Share on other sites More sharing options...
brodie4598 Posted April 22, 2020 Share Posted April 22, 2020 Yup, Rift-S, i9 9900k, 2070 Super here and sometimes it's unplayable. Simple missions are fine but anything complex and most multiplayer servers are almost impossible to enjoy. Also if I load up it's hit or miss - I might see FPS as low as 1-2, or maybe it might be fine (in the 40s). But the moment a plane spawns near me it cuts in half. Another interesting thing is when I am playing with a friend our FPS will drop at exactly the same time so that tells me there's something happening or changing in the sim to cause it. I just picked up Prepar3D v5 and I'm sorry to say performance in that is way better than DCS right now and that's truly shocking to me. I always bragged that DCS performace was so good that you didn't even have to think about it. Link to comment Share on other sites More sharing options...
DronevidsandFreedom Posted April 22, 2020 Share Posted April 22, 2020 Yeah it has to be dcs because I have xplane 11 and it runs fine Link to comment Share on other sites More sharing options...
HoneyBadger Posted April 24, 2020 Share Posted April 24, 2020 Wish ED would fix this already. It's such a shame that this month of free modules was ruined by unplayable performance in VR. I was really looking to sink my teeth into the JF-17 to see if it was something I wanted to buy but I can't play it... Link to comment Share on other sites More sharing options...
Recommended Posts