DCS and Odyssey+ cross-eyed!!

I have the same Problem on my Odyssey, the patch changed nothing for me.

I get used to it while flying, but it is easily recognizable when you change IPD or Volume on the odyssey, then you'll see that the Notification is shifted vertically between the eyes.

It's got to be a difference in eye's, I can tell it's there, but not by any direct visual cue in the goggles. It's mainly when they are remove after a time in DCS my eyes see it. Usually the right eye is a bit out of focus until it re-adapts. For now limiting exposure, there's other flight sims.

exactly as you mentioned.

Guys who have problem with crosseye : there is attached Visualizer.dll with diagnostic print enabled , please download it , unpack and place into DCS/bin folder

after that in DCS.log you will find blocks like this

2019-01-18 08:51:14.782 INFO VISUALIZER: OpenVR

 

i want to collect these logs to investigate issue deeper

Hi Alex, judging from logs above, I calculated misalignment with method described here https://steamcommunity.com/app/719950/discussions/0/1742229167208813376/?ctp=3#c1742231069940351286

Vertical misalignment of your Odyssey is relatively small. It's only 0.41994205°. My original Odyssey has 1.2° and I didn't realy noticed it until I knew how to see it.

Here on Russian forum I described how to see misalignment https://forums.eagle.ru/showpost.php?p=3736445&postcount=17

There is also partial workaround of this problem. Inject function of Revive. Instruction here https://forums.eagle.ru/showpost.php?p=3734199&postcount=7

I will attach logs for both my Odyssey headsets later.

On my goggles, the effect of crossed eyes is very visible. Here is the record from my DCS.log:

Projection/////////////////////////////////////////////////////////////

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR Projection Bounds Eye 0: 1.24654,1.04049,1.43916,1.41800

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:

0.87450,0.00000,-0.09010,0.00000

0.5f,0.00000,0.70000,-0.00740

0.5f,0.00000,0.00000,0.00000

0.5f,0.00000,0.02000,0.00000

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR Projection Converted to DCS:

0.87450,0.00000,0.00000,0.00000

0.5f,0.00000,0.70000,0.00000

0.5f,0.00000,0.09010,-0.00740

0.5f,-0.00000,1.00000,0.00000

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :

0.87450,0.00000,0.00000,0.00000

0.5f,0.00000,0.70000,0.00000

0.5f,0.00000,0.09010,-0.00740

0.5f,-0.00000,1.00000,0.00000

2019-01-18 13:41:47.316 INFO VISUALIZER: -------------------------------------------------------------------------------------

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04728,1.23286,1.41837,1.42546

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:

0.87714,0.00000,0.08139,0.00000

0.5f,0.00000,0.70328,0.00249

0.5f,0.00000,0.00000,0.00000

0.5f,0.00000,0.02000,0.00000

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR Projection Converted to DCS:

0.87714,0.00000,0.00000,0.00000

0.5f,0.00000,0.70328,0.00000

0.5f,0.00000,-0.08139,0.00249

0.5f,-0.00000,1.00000,0.00000

2019-01-18 13:41:47.316 INFO VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :

0.87714,0.00000,0.00000,0.00000

0.5f,0.00000,0.70328,0.00000

0.5f,0.00000,-0.08139,0.00249

0.5f,-0.00000,1.00000,0.00000

2019-01-18 13:41:47.316 INFO VISUALIZER: ///////////////////////////////////////////////////////////////////////////////

On my goggles, the effect of crossed eyes is very visible. Here is the record from my DCS.log:

I wonder, how numbers in log will change if you open DCS through Revive inject?

I tried, but there is no data in the log at that time.

I tried, but there is no data in the log at that time.

Hm, it's logical. Logs only for OpenVR, not Oculus api.

And then the image is perfectly aligned;)

And then the image is perfectly aligned;)

You mean with Revive?

Yes exactly. only with Revive you can use DCS for now.

Logs with my HMDs. Both have this issue. In Samsung Odyssey+ misalignment is bigger compared to original Odyssey.

Samsung Odyssey+

2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR Projection Bounds Eye 0: 1.23711,1.04328,1.43900,1.41406
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:
0.87705,0.00000,-0.08500,0.00000
0.5f,0.00000,0.70100,-0.00874
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87705,0.00000,0.00000,0.00000
0.5f,0.00000,0.70100,0.00000
0.5f,0.00000,0.08500,-0.00874
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87705,0.00000,0.00000,0.00000
0.5f,0.00000,0.70100,0.00000
0.5f,0.00000,0.08500,-0.00874
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:21:22.998 INFO    VISUALIZER: -------------------------------------------------------------------------------------
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04504,1.23982,1.41955,1.43116
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:
0.87533,0.00000,0.08525,0.00000
0.5f,0.00000,0.70158,0.00407
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87533,0.00000,0.00000,0.00000
0.5f,0.00000,0.70158,0.00000
0.5f,0.00000,-0.08525,0.00407
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:21:22.998 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87533,0.00000,0.00000,0.00000
0.5f,0.00000,0.70158,0.00000
0.5f,0.00000,-0.08525,0.00407
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:21:22.998 INFO    VISUALIZER: ///////////////////////////////////////////////////////////////////////////////
2019-01-18 18:21:22.998 INFO    VISUALIZER: LAUNCH IN VR : OpenVR : Samsung Windows Mixed Reality 800ZBA

Samsung Odyssey

2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR Projection Bounds Eye 0: 1.23792,1.04332,1.42552,1.42044
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:
0.87671,0.00000,-0.08530,0.00000
0.5f,0.00000,0.70275,-0.00178
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87671,0.00000,0.00000,0.00000
0.5f,0.00000,0.70275,0.00000
0.5f,0.00000,0.08530,-0.00178
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87671,0.00000,0.00000,0.00000
0.5f,0.00000,0.70275,0.00000
0.5f,0.00000,0.08530,-0.00178
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:38:43.236 INFO    VISUALIZER: -------------------------------------------------------------------------------------
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04621,1.22745,1.40471,1.42192
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:
0.87964,0.00000,0.07971,0.00000
0.5f,0.00000,0.70756,0.00609
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87964,0.00000,0.00000,0.00000
0.5f,0.00000,0.70756,0.00000
0.5f,0.00000,-0.07971,0.00609
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:38:43.236 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87964,0.00000,0.00000,0.00000
0.5f,0.00000,0.70756,0.00000
0.5f,0.00000,-0.07971,0.00609
0.5f,-0.00000,1.00000,0.00000
2019-01-18 18:38:43.236 INFO    VISUALIZER: ///////////////////////////////////////////////////////////////////////////////
2019-01-18 18:38:43.236 INFO    VISUALIZER: LAUNCH IN VR : OpenVR : Samsung Windows Mixed Reality 800ZAA

Myself and my son have the crosseyed problem with our odyssey's also. Kinda drove me away from DCS. Hope they get it fixed soon.

2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR Projection Bounds Eye 0: 1.22781,1.04714,1.42159,1.41197
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:
0.87914,0.00000,-0.07942,0.00000
0.5f,0.00000,0.70582,-0.00340
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87914,0.00000,0.00000,0.00000
0.5f,0.00000,0.70582,0.00000
0.5f,0.00000,0.07942,-0.00340
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87914,0.00000,0.00000,0.00000
0.5f,0.00000,0.70582,0.00000
0.5f,0.00000,0.07942,-0.00340
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:38.521 INFO    VISUALIZER: -------------------------------------------------------------------------------------
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04088,1.24809,1.42268,1.43269
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:
0.87376,0.00000,0.09053,0.00000
0.5f,0.00000,0.70043,0.00351
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87376,0.00000,0.00000,0.00000
0.5f,0.00000,0.70043,0.00000
0.5f,0.00000,-0.09053,0.00351
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:38.521 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87376,0.00000,0.00000,0.00000
0.5f,0.00000,0.70043,0.00000
0.5f,0.00000,-0.09053,0.00351
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:38.521 INFO    VISUALIZER: ///////////////////////////////////////////////////////////////////////////////
2019-01-19 06:15:38.522 WARNING EDCORE: Source ./Mods/aircraft/FA-18C/Cockpit/Scripts/../Shape is already mounted to the same mount /models/.
2019-01-19 06:15:40.399 INFO    COCKPITBASE: lua state still active MACROS, 55 (status undefined)
2019-01-19 06:15:40.399 INFO    COCKPITBASE: lua state still active HMD, 62 (status undefined)
2019-01-19 06:15:40.402 INFO    WORLDGENERAL: loaded from mission Scripts/World/birds.lua
2019-01-19 06:15:40.405 INFO    DCS: dbox not found , skip
2019-01-19 06:15:40.611 INFO    Lua: Lua CPU usage: metric: average mission execution: 75.5501 %
2019-01-19 06:15:40.615 INFO    TACVIEW.DLL: Recording flight data in [C:\Users\dalla\Documents\Tacview\Tacview-20190119-001541-DCS-f18 practice guns.zip.acmi]
2019-01-19 06:15:40.618 INFO    EDTERRAINGRAPHICS41:     surface5 gc() LOD 0 73 squares
2019-01-19 06:15:40.620 INFO    EDTERRAINGRAPHICS41:     surface5 gc() LOD 1 73 squares
2019-01-19 06:15:40.620 INFO    EDTERRAINGRAPHICS41: surface5 gc() 4.772325 ms
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR Projection Bounds Eye 0: 1.22781,1.04714,1.42159,1.41197
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:
0.87914,0.00000,-0.07942,0.00000
0.5f,0.00000,0.70582,-0.00340
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87914,0.00000,0.00000,0.00000
0.5f,0.00000,0.70582,0.00000
0.5f,0.00000,0.07942,-0.00340
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87914,0.00000,0.00000,0.00000
0.5f,0.00000,0.70582,0.00000
0.5f,0.00000,0.07942,-0.00340
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:43.759 INFO    VISUALIZER: -------------------------------------------------------------------------------------
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04088,1.24809,1.42268,1.43269
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:
0.87376,0.00000,0.09053,0.00000
0.5f,0.00000,0.70043,0.00351
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87376,0.00000,0.00000,0.00000
0.5f,0.00000,0.70043,0.00000
0.5f,0.00000,-0.09053,0.00351
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:43.759 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87376,0.00000,0.00000,0.00000
0.5f,0.00000,0.70043,0.00000
0.5f,0.00000,-0.09053,0.00351
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:15:43.759 INFO    VISUALIZER: ///////////////////////////////////////////////////////////////////////////////
2019-01-19 06:15:46.625 WARNING DXGUI: Invalid blur type!
2019-01-19 06:18:43.689 INFO    Lua: Lua CPU usage: metric: average mission execution: 0.9014 %
2019-01-19 06:18:46.694 INFO    Config: netview stopped
2019-01-19 06:18:46.714 INFO    TERRAIN: lSystem::CleanScenes()
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR Projection Bounds Eye 0: 1.22781,1.04714,1.42159,1.41197
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:
0.87914,0.00000,-0.07942,0.00000
0.5f,0.00000,0.70582,-0.00340
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87914,0.00000,0.00000,0.00000
0.5f,0.00000,0.70582,0.00000
0.5f,0.00000,0.07942,-0.00340
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87914,0.00000,0.00000,0.00000
0.5f,0.00000,0.70582,0.00000
0.5f,0.00000,0.07942,-0.00340
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:18:46.719 INFO    VISUALIZER: -------------------------------------------------------------------------------------
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04088,1.24809,1.42268,1.43269
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:
0.87376,0.00000,0.09053,0.00000
0.5f,0.00000,0.70043,0.00351
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87376,0.00000,0.00000,0.00000
0.5f,0.00000,0.70043,0.00000
0.5f,0.00000,-0.09053,0.00351
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:18:46.719 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87376,0.00000,0.00000,0.00000
0.5f,0.00000,0.70043,0.00000
0.5f,0.00000,-0.09053,0.00351
0.5f,-0.00000,1.00000,0.00000
2019-01-19 06:18:46.719 INFO    VISUALIZER: ///////////////////////////////////////////////////////////////////////////////

Seems like the latest OB update might have fixed it for me? I'm getting less cross eyed action at least in menus, haven't gone out for a flight yet.

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR Projection Bounds Eye 0: 1.23765,1.04407,1.44083,1.41608

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:

0.87653,0.00000,-0.08484,0.00000

0.5f,0.00000,0.70006,-0.00866

0.5f,0.00000,0.00000,0.00000

0.5f,0.00000,0.02000,0.00000

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR Projection Converted to DCS:

0.87653,0.00000,0.00000,0.00000

0.5f,0.00000,0.70006,0.00000

0.5f,0.00000,0.08484,-0.00866

0.5f,-0.00000,1.00000,0.00000

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :

0.87653,0.00000,0.00000,0.00000

0.5f,0.00000,0.70006,0.00000

0.5f,0.00000,0.08484,-0.00866

0.5f,-0.00000,1.00000,0.00000

2019-01-20 22:36:06.154 INFO VISUALIZER: -------------------------------------------------------------------------------------

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04883,1.23613,1.42562,1.43054

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:

0.87529,0.00000,0.08197,0.00000

0.5f,0.00000,0.70024,0.00172

0.5f,0.00000,0.00000,0.00000

0.5f,0.00000,0.02000,0.00000

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR Projection Converted to DCS:

0.87529,0.00000,0.00000,0.00000

0.5f,0.00000,0.70024,0.00000

0.5f,0.00000,-0.08197,0.00172

0.5f,-0.00000,1.00000,0.00000

2019-01-20 22:36:06.154 INFO VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :

0.87529,0.00000,0.00000,0.00000

0.5f,0.00000,0.70024,0.00000

0.5f,0.00000,-0.08197,0.00172

0.5f,-0.00000,1.00000,0.00000

2019-01-20 22:36:06.154 INFO VISUALIZER: ///////////////////////////////////////////////////////////////////////////////

Still getting cross eye issues in latest OB with Samsung O+ only. Rift and Vive do not have this issue. After 10-15 minutes my eyes try to adjust but it leads to discomfort and even headaches after removing HMD.

Sent from my moto z3 using Tapatalk

Here comes mine - Normal Odyssey with cross eye effect

2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR Projection Bounds Eye 0: 1.22225,1.04724,1.43455,1.41684
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:
0.88125,0.00000,-0.07711,0.00000
0.5f,0.00000,0.70141,-0.00621
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.88125,0.00000,0.00000,0.00000
0.5f,0.00000,0.70141,0.00000
0.5f,0.00000,0.07711,-0.00621
0.5f,-0.00000,1.00000,0.00000
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.88125,0.00000,0.00000,0.00000
0.5f,0.00000,0.70141,0.00000
0.5f,0.00000,0.07711,-0.00621
0.5f,-0.00000,1.00000,0.00000
2019-01-21 17:41:02.143 INFO    VISUALIZER: -------------------------------------------------------------------------------------
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04141,1.23701,1.40825,1.43071
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:
0.87780,0.00000,0.08585,0.00000
0.5f,0.00000,0.70448,0.00791
0.5f,0.00000,0.00000,0.00000
0.5f,0.00000,0.02000,0.00000
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR Projection Converted to DCS:
0.87780,0.00000,0.00000,0.00000
0.5f,0.00000,0.70448,0.00000
0.5f,0.00000,-0.08585,0.00791
0.5f,-0.00000,1.00000,0.00000
2019-01-21 17:41:02.143 INFO    VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :
0.87780,0.00000,0.00000,0.00000
0.5f,0.00000,0.70448,0.00000
0.5f,0.00000,-0.08585,0.00791
0.5f,-0.00000,1.00000,0.00000
2019-01-21 17:41:02.143 INFO    VISUALIZER: ///////////////////////////////////////////////////////////////////////////////

Here's mine:

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR Projection/////////////////////////////////////////////////////////////

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR Projection Bounds Eye 0: 1.23056,1.04169,1.42315,1.41438

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR GetProjectionMatrix(0,150000,0.02) result:

0.88019,0.00000,-0.08312,0.00000

0.5f,0.00000,0.70484,-0.00309

0.5f,0.00000,0.00000,0.00000

0.5f,0.00000,0.02000,0.00000

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR Projection Converted to DCS:

0.88019,0.00000,0.00000,0.00000

0.5f,0.00000,0.70484,0.00000

0.5f,0.00000,0.08312,-0.00309

0.5f,-0.00000,1.00000,0.00000

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :

0.88019,0.00000,0.00000,0.00000

0.5f,0.00000,0.70484,0.00000

0.5f,0.00000,0.08312,-0.00309

0.5f,-0.00000,1.00000,0.00000

2019-01-21 18:29:49.088 INFO VISUALIZER: -------------------------------------------------------------------------------------

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR Projection Bounds Eye 1: 1.04662,1.22572,1.42411,1.42591

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR GetProjectionMatrix(1,150000,0.02) result:

0.88015,0.00000,0.07882,0.00000

0.5f,0.00000,0.70175,0.00063

0.5f,0.00000,0.00000,0.00000

0.5f,0.00000,0.02000,0.00000

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR Projection Converted to DCS:

0.88015,0.00000,0.00000,0.00000

0.5f,0.00000,0.70175,0.00000

0.5f,0.00000,-0.07882,0.00063

0.5f,-0.00000,1.00000,0.00000

2019-01-21 18:29:49.088 INFO VISUALIZER: OpenVR ed::makePerspectiveForHMDProjection result :

0.88015,0.00000,0.00000,0.00000

0.5f,0.00000,0.70175,0.00000

0.5f,0.00000,-0.07882,0.00063

0.5f,-0.00000,1.00000,0.00000

Hello,

ODYSSEY + with problem

Device @ - holographic .WindowsHolographic - Samsung Windows Mixed Reality 8@0ZBA by WindowsMR - HMD - generic_hmd

D3DAdapteriIndex: (3)

RecommendedRenderTargetSize: width=2014, height=2519

Left Projection: left=-1.244640, right=1.042638, top=-1.438706, bottom=1.421941

Right Projection: left=-1.050021, right=1.231440, top=-1.420814, bottom=1.432806

Lens Center: (6.000000, 0.000000), (0.000000, 0.000000)

Tracking universe: 74588067726600

Device 16 - gamepad.03000000242f00002e00000000007801 - XInput Controller - Controller - generic_controller

No supported buttons

Driver gamepad : © displays

Driver holographic : © displays

Driver htc : @ displays

Driver lighthouse : ® displays

Driver oculus : ® displays

Driver oculus_legacy : © displays

Driver null : ® displays

~~~1.64° misalignment, immediatly noticeable in game (so I don't play it ..)

Eyes try to adapt: The worst thing is when I get the headset off I'm eye crossing for like a minute, don't think its really healthy ..

It's a shame because DCS would look pretty good with this headset ..

Can't find the log file in dcs folder anyone could tell me the path?

I have the O+ as well and love it. However, I don't seem to have that cross-eyed issue myself, unless it's too minute for me to spot.

So how come that it's either not happening (or not as pronounced) for all O+ users? Is that a hardware assembly tolerance issue that can be adjusted via software, or is it purely a software related issue?

I have the O+ as well and love it. However, I don't seem to have that cross-eyed issue myself, unless it's too minute for me to spot.

 

 

 

So how come that it's either not happening (or not as pronounced) for all O+ users? Is that a hardware assembly tolerance issue that can be adjusted via software, or is it purely a software related issue?

Sent from my moto z3 using Tapatalk

This an inconvenience to people who have paid a significant amount of money not only for this head set, but for the modules and support towards DCS, Steam and the like, but more importantly this is a major risk to someone's personal health. Permanently damaging their eye sight and not to mention other inherent or latent medical issues that could arise.

Perhaps they might want to focus on this issue and take it a little more seriously than updating the livery or 'wear and tear' of an object you cant really see anyway. :music_whistling:

Unfortunately, also update number 2.5.4.26552 did not change the problem of the image's misalignment.

Any news on progress regarding cross eyed thing. I had this issue right away form start eye strain puts me off DCS cause its simply health consern:/

I also try to follow topics related to this but no new official news for now. Unfortunately, today's update did not even mention the problem: / In addition, I noticed that from two updates after the launch of DCS by Revive Night Vision works only in the left eye. By running normally through SteamVR with crossed eyes, night vision works in both.