Shadow_1stVFW Posted September 5, 2018 Share Posted September 5, 2018 Noticed today the pylon positions have been updated and most fixed (Which is awesome, thanks). The GBU-12 and 16 are still incorrect. When you guys get around to it. Aurora R7 || i7K 8700K || 2TB 7200RPM SATA 6Gb/s || 2TB M.2 PCIe x4 SSD || GTX 1080 Ti with 11GB GDDR5X || Windows 10 Pro || 32GB Dual Channel DDR4 at 2667MHz || Virpil Warbird Base || Virpil T-50 Stick || Virpil MT-50 Throttle || Thrustmaster TPR Pedals || Oculus Rift Link to comment Share on other sites More sharing options...
Andrew8604 Posted September 25, 2018 Share Posted September 25, 2018 I noticed the same. GBU-12 and GBU-16 mounted directly to a pylon is mounted too high as if the pylon is imbedded into the bomb. F-5E-3 has the same problem with Mk-82LD's and GBU-12's. So not sure if it is an aircraft module problem or somewhere else. I also noticed there is a choice of three SUU-25 dispensers on a TER (triple ejector rack). However, they were invisible when installed on pylon #2. I didn't test it on pylon #6. Or they did not install when the ground loading menu accepted it, and therefore were invisible. Not sure which it is. One more item: Please check if two or three GBU-16's can be loaded on a TER. The ordnance chart in your (RAZBAM) Pocket Guide says it is "legal" for 3 on pylons #3 & #5. But looking at them loaded, the tail fins hit each other. They look like they are properly positioned on the TER, however. (I don't know how to upload a picture to show you) Link to comment Share on other sites More sharing options...
Shadow_1stVFW Posted September 25, 2018 Author Share Posted September 25, 2018 I have seen the same with the TER flares Sent from my SM-G960U using Tapatalk Aurora R7 || i7K 8700K || 2TB 7200RPM SATA 6Gb/s || 2TB M.2 PCIe x4 SSD || GTX 1080 Ti with 11GB GDDR5X || Windows 10 Pro || 32GB Dual Channel DDR4 at 2667MHz || Virpil Warbird Base || Virpil T-50 Stick || Virpil MT-50 Throttle || Thrustmaster TPR Pedals || Oculus Rift Link to comment Share on other sites More sharing options...
Shadow_1stVFW Posted October 23, 2018 Author Share Posted October 23, 2018 Noticed today the pylon positions have been updated and most fixed (Which is awesome, thanks). The GBU-12 and 16 are still incorrect. When you guys get around to it. Bump Sent from my SM-G960U using Tapatalk Aurora R7 || i7K 8700K || 2TB 7200RPM SATA 6Gb/s || 2TB M.2 PCIe x4 SSD || GTX 1080 Ti with 11GB GDDR5X || Windows 10 Pro || 32GB Dual Channel DDR4 at 2667MHz || Virpil Warbird Base || Virpil T-50 Stick || Virpil MT-50 Throttle || Thrustmaster TPR Pedals || Oculus Rift Link to comment Share on other sites More sharing options...
Nealius Posted October 24, 2018 Share Posted October 24, 2018 Since I don't fly online I did a .lua edit. Changing the GBU-12 attachment position to the following: 0.380, -0.145, 0.0 Puts them in roughly the same position as Mk82 slicks. I haven't tried the GBU-16 yet. Link to comment Share on other sites More sharing options...
Shrike88 Posted October 25, 2018 Share Posted October 25, 2018 Since I don't fly online I did a .lua edit. Changing the GBU-12 attachment position to the following: 0.380, -0.145, 0.0 Puts them in roughly the same position as Mk82 slicks. I haven't tried the GBU-16 yet. If it's that easy I hope this get addressed the next update. Link to comment Share on other sites More sharing options...
Shadow_1stVFW Posted October 25, 2018 Author Share Posted October 25, 2018 Agreed. When this was was fixed for the other bombs the GBUs were missed. Not sure why. But everything else was fixed. Sent from my SM-G960U using Tapatalk Aurora R7 || i7K 8700K || 2TB 7200RPM SATA 6Gb/s || 2TB M.2 PCIe x4 SSD || GTX 1080 Ti with 11GB GDDR5X || Windows 10 Pro || 32GB Dual Channel DDR4 at 2667MHz || Virpil Warbird Base || Virpil T-50 Stick || Virpil MT-50 Throttle || Thrustmaster TPR Pedals || Oculus Rift Link to comment Share on other sites More sharing options...
Nealius Posted October 26, 2018 Share Posted October 26, 2018 (edited) What I find strange is that the default Mk82 slick position is this: -0.085, -0.155, 0.0 GBU-12s are just Mk82 slicks with a guidance kit, so theoretically the attachment position should be the same....but they are way off. EDIT I fixed the GBU-16s. Their position should be the following: 0.450, -0.180, 0.0 Now, what I find odd is that none of the bombs are really attached properly. All of them are floating some distance below the pylons, and the mounting hook positions are strange. If I'm understanding the pylon interface correctly, there is a track inside the pylon where the two mounting hooks go, and the four "feet" that extend out from the pylon simply stabilize the bomb. When trying to properly position the bombs so that the mounting hooks go inside the pylon's track and the "feet" touch the top of the bomb, I found that the Harrier's pylon tracks are shorter than the distance between the two hooks, and the "feet" are so high that the bomb model will clip into the pylon model. Edited October 26, 2018 by Nealius Added info Link to comment Share on other sites More sharing options...
=DECOY= Posted October 26, 2018 Share Posted October 26, 2018 Hi Guys, the team are aware, and are currently looking into this Water cooled i9-9900K | Maximus Code XI MB | RTX3090 | 64GB | HP Reverb G2 Link to comment Share on other sites More sharing options...
Nealius Posted October 27, 2018 Share Posted October 27, 2018 Just as a caveat, the .lua edits may be messing with track replay reliability. I've flown a couple of missions dropping GBU-16s and on one of my tracks the bombs utterly fail to drop, despite the aircraft jolting as if they had dropped. I don't appear to have any issues with other weapons. Link to comment Share on other sites More sharing options...
Recommended Posts