Jump to content

Red Flag Training Missions - F/A-18C


Recommended Posts

Red Flag Training Missions - F/A-18C

 

REDFLAG.jpg

 

DOWNLOAD:

http://www.digitalcombatsimulator.com/en/files/3302808/

 

A series of advanced training missions based on Red Flag ranges and rules.

 

Features:

- custom ATC with working ATIS

- custom Voice Overs

- populated airbases

- simulated Red Flag rules

- custom Misson Data Card on built-in kneeboard

 

Missions:

Day 0 - Welcome to Nellis!

Enjoy the dusk and land with AWACS Magic 1-1

Day 1 - NTTR Familiarization and daylight formation flying

Follow Springfield 1-1 over NTTR airspace , train formation flying

Day 1 - Night formation flying

Escort tanker during night time until bingo fuel or scheduled guests are done refueling

Day 2 - AAR and BFM training

Try air refueling and then engage Springfield 1 over FEBA guns only!

Day 2 - ACM Training

Engage Aggressors F-16C over FEBA with Sidewinders

Day 2 - ACM Training AGGRESSOR

Your turn as an Aggressor! Engage Blue F-15E over FEBA with Sidewinders, no Tanker or AWACS support this time!

Day 2 - BVR Training

Engage Aggressors F-15C over FEBA with AIM-7s ( will add AIM-120s once LTWS is implemented)

Day 3 - Air-Ground Range Training

Train your ground pounding skills against simulated Red tanks with M151 Rockets and Mk82s over Range 62. FAC Bravo 1 will call hits!

Day 3 - Pop-up Attack Training

Try the Pop-up Attack maneuver on a pre-planned target. Use terrain masking to approch the target and avoid the defending SA-6 and AAA. FAC Bravo 1 will call hit. Once pickle go defensive and avoid SAM launch.

-Day 3 - JTAC Training

Contact JTAC Axeman for support Bravo planned attack on a Red Logistic Outpost defended by tanks , AAA and an SA-2.

Day 3 - Sead Training

Support Uzi1 and Enfield 1 for a surprise attack on Red Forces. Test yourself in your first package mission!

 

...many more mission to come!!!

 

Day 4 - A day over FEBA ( long lasting live fire mission against Red Forces )

 

 

Custom ATC is divided in steps where you simply pass through them by pressing SPACE everytime you got message to do it.

 

after startup -> Grab ATIS and contact Ground Control

hold short runway 3R -> contact Tower

after takeoff -> contact Departure

when you arrive at the last waypoint -> Grab ATIS and select the right information in the F10 menu to contact Approach

around 5nm to Nellis AFB -> contact Tower

After landing -> contact Ground for parking

Emergency ->this will show up after departure clearance, you can select it anytime with F10 menu , if you are in trouble Nellis ATC will let you land immediately, firetrucks will wait you at the end of the runway.

 

How Custom ATC works:

 

Emergency landing:

 

 

 

NOTES:

- there COULD be some bugs on ATC voice overs (mostly VOs cutting each others or missing) , please report if any.

 

 

 

I've tried all the missions as much as I could , if there are some bugs please report.

 

47579120_10215529890434469_4059220715830771712_o.jpg?_nc_cat=103&_nc_ht=scontent-mxp1-1.xx&oh=4cb4723b10f5672c51847444ab86d6be&oe=5C92819A

48056242_10215529890634474_8521257218828402688_o.jpg?_nc_cat=107&_nc_ht=scontent-mxp1-1.xx&oh=911bb3f4905b4d82c0b9957b7da10e41&oe=5CA83B33

47574421_10215529891474495_3288539837300211712_o.jpg?_nc_cat=111&_nc_ht=scontent-mxp1-1.xx&oh=ae5a6ebc261d045b8e1be43affd88b19&oe=5CAC91D7

47680601_10215529890754477_7536661663009734656_o.jpg?_nc_cat=109&_nc_ht=scontent-mxp1-1.xx&oh=52ef388dd4c68401e4430b58ed6a9ee9&oe=5C6A0B74

49704115_10215675619677609_6329114801532305408_o.jpg?_nc_cat=105&_nc_ht=scontent-mxp1-1.xx&oh=149401512cc2a8075f2b39cc6c1f3ce4&oe=5CCF0545

49829602_10215719768261296_2835714722249048064_o.jpg?_nc_cat=105&_nc_ht=scontent-mxp1-1.xx&oh=f93f841c7aa086f32b5c8d994806168b&oe=5CC46C5C

51311617_10215937070053705_4600389794877407232_o.jpg?_nc_cat=110&_nc_ht=scontent-mxp1-1.xx&oh=8401a6cb4a23557b0f960179e6a8ad41&oe=5CB639D3


Edited by beppe_goodoldrebel
  • Like 1
Link to comment
Share on other sites

Thanks a lot for sharing, will give them a try :)

 

For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra

For Gaming: 34" Monitor - Ryzen 3600X - 32 GB DDR4 2400 - nVidia GTX1070ti - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar - Oculus Rift CV1

Mobile: iPad Pro 12.9" of 256 GB

Link to comment
Share on other sites

Interesting.

Quite :)

i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | DIY Collective | Virpil desk mount | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3x TM MFDs | 2x bass shakers pedal plate| SIMple SIMpit chair | WinWing TakeOff panel | PointCTRL v2 | Andre JetSeat | Winwing Hornet UFC | Winwing Viper ICP

FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle

Link to comment
Share on other sites

New version available!

 

ADDED:

 

Day 3 - Pop-up Attack Training

Try the Pop-up Attack maneuver on a pre-planned target. Use terrain masking to approch the target and avoid the defending SA-6 and AAA. FAC Bravo 1 will call hit. Once pickle go defensive and avoid SAM launch.

 

 

UPDATE:

 

Day 0 - Welcome to Nellis! ADDED soundtrack music at the beginning

ATC messages FIXED something here and there

BFM, ACM , BVR missions FIXED some trigger errors

Link to comment
Share on other sites

I'll have to download this again. I've flown the first couple missions, and the instructions weren't super clear on the sequence of things.

 

 

 

Example, the night escort mission. I had no idea that Texaco was already airborne, 60-ish NM to the North. The message just told me to contact ATC when I was done with start-up, but there was nothing different after I let ATC know I was taking off.

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

Example, the night escort mission. I had no idea that Texaco was already airborne, 60-ish NM to the North. The message just told me to contact ATC when I was done with start-up, but there was nothing different after I let ATC know I was taking off.

 

I think you miss how custom ATC works, maybe it's just my fault I did not explain how to deal with it.

 

Custom ATC is divided in steps and you simply pass through them by pressing SPACE everytime you got message to do it.

 

after startup -> grab ATIS and contact Ground Control

hold short runway 3R -> contact Tower

after takeoff -> contact departure

when you arrive at the last waypoint -> grab ATIS and select the right information in the F10 menu to contact Approach

around 5nm to Nellis AFB -> contact Tower

After landing -> contact Ground for parking

 

If you ever played Baltic_dragon's M2000C Red Flag campaign the system is almost the same, i just made it a little simplier.

 

Beside this , I'm working on custom kneeboard panels and a Mission Data Card that can guide you through every waypoint.

 

P.S. on that Night Formation mission , when you arrive at steerpoint 2 , just use AA Tacan 26Y , you will find Texaco on your HSI.


Edited by beppe_goodoldrebel
Link to comment
Share on other sites

Seems like you've made a lot of effort here, well done. I'll certainly be flying this Red Flag.

 

Regarding the comms, can I not use Vaicom/ VA for this? I've tried but I never get any responses from ATC. With Vaicom in VR it's a bit of an immersion killer having to press space and seeing the text.

MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case |

 

Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA |

Link to comment
Share on other sites

Seems like you've made a lot of effort here, well done. I'll certainly be flying this Red Flag.

 

Regarding the comms, can I not use Vaicom/ VA for this? I've tried but I never get any responses from ATC. With Vaicom in VR it's a bit of an immersion killer having to press space and seeing the text.

 

I dont use VA but...I guess if you create a command in VA where it result in pressing Spacebar maybe it will work?

Link to comment
Share on other sites

'Spose I should have thought about that!! I'll give it a whirl. Cheers

MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case |

 

Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA |

Link to comment
Share on other sites

Sorry to bother you again. Mission 1 - I get the message to contact ATC within 5Nm but only get this message after I pass the runway threshold. Am I missing something here?

MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case |

 

Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA |

Link to comment
Share on other sites

I think you miss how custom ATC works, maybe it's just my fault I did not explain how to deal with it.

 

Custom ATC is divided in steps and you simply pass through them by pressing SPACE everytime you got message to do it.

 

after startup -> grab ATIS and contact Ground Control

hold short runway 3R -> contact Tower

after takeoff -> contact departure

when you arrive at the last waypoint -> grab ATIS and select the right information in the F10 menu to contact Approach

around 5nm to Nellis AFB -> contact Tower

After landing -> contact Ground for parking

 

If you ever played Baltic_dragon's M2000C Red Flag campaign the system is almost the same, i just made it a little simplier.

 

Beside this , I'm working on custom kneeboard panels and a Mission Data Card that can guide you through every waypoint.

 

P.S. on that Night Formation mission , when you arrive at steerpoint 2 , just use AA Tacan 26Y , you will find Texaco on your HSI.

 

 

I've been playing for 3 years now, and I've never done any of the campaigns. I usually fly my own, self-made SP missions. Your campaign is actually the first I've attempted.

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

All the mission data cards (NAWDC/NSAWC calls them KBCs -- Kneeboard cards) that I've ever seen were custom made with Excel and mission area specific. Strike, CAS, SEAD...all have their own KBCs. I've never seen one available from publicly-accessible sources.

Very Respectfully,

Kurt "Yoda" Kalbfleisch

London

"In my private manual I firmly believed the only time there was too much fuel aboard any aircraft was if it was fire." --Ernest K. Gann

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...