Jump to content

[NO TRACK ATTACHED] Mk-83 and Mk-84 bugged when launching from carrier


bkthunder

Recommended Posts

I noticed with these two bombs (maybe other types as well), starting from a carrier, it's impossible to select them in the stores page, therefore they can't be dropped.

 

The gun works ok.

Windows 10 - Intel i7 7700K 4.2 Ghz (no OC) - Asus Strix GTX 1080 8Gb - 16GB DDR4 (3000 MHz) - SSD 500GB + WD Black FZEX 1TB 6Gb/s

Link to comment
Share on other sites

I noticed with these two bombs (maybe other types as well), starting from a carrier, it's impossible to select them in the stores page, therefore they can't be dropped.

 

The gun works ok.

 

Works fine for me, i use MK-82 and MK-83 from a carrier every day, including rearming. Can you post a track to show your problem?

Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II

System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings

 

Link to comment
Share on other sites

Works fine for me, i use MK-82 and MK-83 from a carrier every day, including rearming. Can you post a track to show your problem?

Same here. No issues at all.

Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit

 

DCS Panavia Tornado (IDS) really needs to be a thing!

 

Tornado3 small.jpg

Link to comment
Share on other sites

For those that say they don't experience that problem...is that still the case when you land on the carrier again and rearm and take off?

Because that is when it happens to me mostly.

4790K@4,6Ghz | EVGA Z97 Classified | 32GB @ 2400Mhz | Titan X hydro copper| SSD 850 PRO

____________________________________

Moments in DCS:

--> https://www.youtube.com/user/weltensegLA

-->

 

WELD's cockpit: --> http://forums.eagle.ru/showthread.php?t=92274

Link to comment
Share on other sites

For those that say they don't experience that problem...is that still the case when you land on the carrier again and rearm and take off?

Because that is when it happens to me mostly.

 

Yes, had no problems taking off from the carrier, dropping my bombs and land again, rearm, takeing off and dropping the bombs again. But maybe it is related to this thread?

https://forums.eagle.ru/showthread.php?t=213393

If i use the Aim7 and don't shoot every Aim7 i'm carrying i can't select my bombs and have to select first the gun(AG) and then i can select the bombs again.

 

EDIT:

I tried it again. I noticed maybe where the problem is. In my little test mission i take off, configure my bombs, do my run, land on the carrier, rearm and have my second run.

If i trie to select the bombs after the second take off in Master Arms SAFE i can't select them, if i go Master Arms armed and select AG before selecting my bombs everything is fine. And that is what i normally do, that would explain why some see this problem and some not.

 

Track attached but it will not be of any use i guess because if played it showed me crashing beside of the carrier instead of landing. Will link the video if the upload is finished.

 

EDIT2:

 


Edited by unknown

Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II

System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...