assafm25 Posted February 27, 2015 Share Posted February 27, 2015 i jet receive one old stick in good condition from a friend of mine all work perfect except of the FF any one make it work on win 8.1? [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
Nopileus Posted February 27, 2015 Share Posted February 27, 2015 It works without any special configuration on Windows 7, 8 and 8.1, drivers are installed automatically. (32 or 64bit does not matter) If FFB doesn't work your settings in DCS are probably wrong or you have a hardware defect. Turn FFB on in the MISC tab and in CONTROLS on each aircraft select the MSFFB2, press 'FF TUNE' and check the 'swap axis' box. You also need to keep your hand on the grip for FFB to be active as it turns off if the sensor does not detect your hand (you can tape one of the holes shut if you like). Link to comment Share on other sites More sharing options...
Boris Posted February 27, 2015 Share Posted February 27, 2015 Did you also get the power cable with it? PC Specs / Hardware: MSI z370 Gaming Plus Mainboard, Intel 8700k @ 5GHz, MSI Sea Hawk 2080 Ti @ 2100MHz, 32GB 3200 MHz DDR4 RAM Displays: Philips BDM4065UC 60Hz 4K UHD Screen, Pimax 8KX Controllers / Peripherals: VPC MongoosT-50, Thrustmaster Warthog HOTAS, modded MS FFB2/CH Combatstick, MFG Crosswind Pedals, Gametrix JetSeat OS: Windows 10 Home Creator's Update Link to comment Share on other sites More sharing options...
assafm25 Posted February 27, 2015 Author Share Posted February 27, 2015 i check the box in the misc and also swap axis but still not work yes i have the power cable for it [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
Nopileus Posted February 27, 2015 Share Posted February 27, 2015 So the stick is completely limp, no resistance on it at all? (while in game in a started up huey for example) If you go to your game controller panel in windows, does it correctly show up with all the axis and buttons moving? You could try going to the device manager and letting windows reinstall the driver for it. If that doesn't solve it i'm going with some sort of hardware defect. Link to comment Share on other sites More sharing options...
assafm25 Posted February 27, 2015 Author Share Posted February 27, 2015 sorry friends i found the problem :) i forgot to connect the stick to the power hahahaha [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
Recommended Posts