beppe_goodoldrebel Posted March 22, 2019 Share Posted March 22, 2019 (edited) Red Flag Training Missions - F-14B DOWNLOAD: https://www.digitalcombatsimulator.com/en/files/3304391/ A series of advanced training missions based on Red Flag ranges and rules. Features: - custom ATC with working ATIS - custom Voice Overs - populated airbases - simulated Red Flag rules - custom Misson Data Card on built-in kneeboard - you can play all missions with human RIO - Campaign version Missions: Day 0 - Welcome to Nellis! Enjoy the dusk and land with AWACS Magic 1-1 Day 1 - NTTR Familiarization and daylight formation flying Follow Springfield 1-1 over NTTR airspace , train formation flying Day 1 - Night formation flying Escort tanker during night time until bingo fuel or scheduled guests are done refueling Day 2 - AAR and BFM training Try air refueling and then engage Springfield 1 over FEBA guns only! Day 2 - ACM Training Engage Aggressors F-16C over FEBA with Sidewinders Day 2 - ACM Training AGGRESSOR Engage Blue Forces F-15E over FEBA with Sidewinders Day 2 - BVR Training Engage Aggressors F-15C over FEBA with AIM-7s Day 3 - Air-Ground Range Training Train your ground pounding skills against simulated Red tanks over Range 62. FAC Bravo 1 will call hits! Day 3 - Pop-up Attack Training Try the Pop-up Attack maneuver on a pre-planned target. Use terrain masking to approch the target and avoid the defending SA-6 and AAA. FAC Bravo 1 will call hit. Once pickle go defensive and avoid SAM launch. ...many more mission to come!!! Custom ATC is divided in steps where you simply pass through them by pressing SPACEBAR everytime you got message to do it. after startup -> Grab ATIS and contact Ground Control hold short runway 3R -> contact Tower after takeoff -> contact Departure when you arrive at the last waypoint -> Grab ATIS and select the right information in the F10 menu to contact Approach around 5nm to Nellis AFB -> contact Tower After landing -> contact Ground for parking Emergency ->this will show up after departure clearance, you can select it anytime with F10 menu , if you are in trouble Nellis ATC will let you land immediately, firetrucks will wait you at the end of the runway. How Custom ATC works: Emergency landing: NOTES: - there COULD be some bugs on ATC voice overs (mostly VOs cutting each others or missing) , please report if any. - some map images in briefing are from the F18 version , in the next days i'll try to replace them , for now follow navigation from Mission Data Card. - when in multiplayer ONLY HOST can deal with ATC cause function that see SPACEBAR input works only with host player I've tried all the missions as much as I could , if there are some bugs please report. Edited April 13, 2019 by beppe_goodoldrebel Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted March 22, 2019 Author Share Posted March 22, 2019 RESERVED Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 7, 2019 Author Share Posted April 7, 2019 I have done a little update with some fixed trigger and moved the download to the ED site. Link to comment Share on other sites More sharing options...
Rudel_chw Posted April 7, 2019 Share Posted April 7, 2019 I havent had yet time to try your missions, as I’m still coming to grips with the carrier landing, but they look really interesting and I’m downloading them now to have them ready after I finish my carrier deployment :) Thanks a lot for sharing. For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600X - 32 GB DDR4 2400 - nVidia GTX1070ti - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar - Oculus Rift CV1 Mobile: iPad Pro 12.9" of 256 GB Link to comment Share on other sites More sharing options...
chaser Posted April 7, 2019 Share Posted April 7, 2019 looks great thanks very much [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 8, 2019 Author Share Posted April 8, 2019 I havent had yet time to try your missions, as I’m still coming to grips with the carrier landing, but they look really interesting and I’m downloading them now to have them ready after I finish my carrier deployment :) Thanks a lot for sharing. You can also land using the overhead pattern if you wish to do it. :smilewink: Link to comment Share on other sites More sharing options...
Сиваш Posted April 8, 2019 Share Posted April 8, 2019 (edited) How to turn down the music in 1 mission Edited April 8, 2019 by Сиваш Link to comment Share on other sites More sharing options...
Sephroth Posted April 9, 2019 Share Posted April 9, 2019 I can't seem to hide the flight stick in the missions. The colors on that first mission is pretty dang good. The limits of NVG's in VR are still frustrating for the third flight, but still a blast. Link to comment Share on other sites More sharing options...
EntropySG Posted April 9, 2019 Share Posted April 9, 2019 Awesome! Looking forward to flying those ! [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 9, 2019 Author Share Posted April 9, 2019 (edited) How to turn down the music in 1 mission You just simply cant in game... you can edit the mission and remove the trigger that enables music. I can't seem to hide the flight stick in the missions. The colors on that first mission is pretty dang good. The limits of NVG's in VR are still frustrating for the third flight, but still a blast. The function that wait the "spacebar action" also works for "backspace" which is binded for hide the stick. Just use another key for hiding the stick. Unfortunately I cant force AI to use lights during night so you cant do it "old style" :D Awesome! Looking forward to flying those ! :thumbup: Edited April 9, 2019 by beppe_goodoldrebel Link to comment Share on other sites More sharing options...
Wavehopper Posted April 9, 2019 Share Posted April 9, 2019 Very good stuff so far. Enjoying it a lot. https://www.youtube.com/channel/UCC9G7AVfi68SovXCTCH-7fA Link to comment Share on other sites More sharing options...
draconus Posted April 11, 2019 Share Posted April 11, 2019 (edited) Good job :thumbup: This is the kind of training I was looking for in a new module! Certainly did not expect to fly a campaign a month after release! It usually says to use Comm2 Channel X (that's how it's done IRL probably) so I used VHF/UHF of RIO, which was pain to set through this horrible Jester menu, but I quickly figured it works the same with my pilot's UHF. That Humvee (1st mission) could go slower - it's night, we're not allowed to taxi that fast and I saw another one near the Alpha taxiway so it could be confusing. Being not native I might have not catch all the radio messages. Distortion and low volume made it harder too. At the end of mission 2 (F-5 formation) I'm asked for right answer that I didn't know. I chose Alpha just because. What was the other option for? No need for emergency at the time - fuel 6000. Good thing is the Tigers were datalinked :) Why this client/slot style? Edited April 11, 2019 by draconus Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 11, 2019 Author Share Posted April 11, 2019 Good job :thumbup: This is the kind of training I was looking for in a new module! Certainly did not expect to fly a campaign a month after release! It usually says to use Comm2 Channel X (that's how it's done IRL probably) so I used VHF/UHF of RIO, which was pain to set through this horrible Jester menu, but I quickly figured it works the same with my pilot's UHF. That Humvee (1st mission) could go slower - it's night, we're not allowed to taxi that fast and I saw another one near the Alpha taxiway so it could be confusing. Being not native I might have not catch all the radio messages. Distortion and low volume made it harder too. At the end of mission 2 (F-5 formation) I'm asked for right answer that I didn't know. I chose Alpha just because. What was the other option for? No need for emergency at the time - fuel 6000. Good thing is the Tigers were datalinked :) Why this client/slot style? The campaign was originally designed for F18 , that's why some of the messages report CHxx COMM 1 or 2 . Refer always to Channel for both radio ( their preset are the same ) , I have to fix some wrong messages I left behind. As you can see missions are quite complicated with a lot of triggers, I miss something in the "translation" to the F14. I think the humvee goes at 20knts... but I can totally slow it down. At the end of the mission 2 you are asked to "grab ATIS" ( listen to CH2 ) , here you can hear "information" ( Alpha, Bravo, Charlie, etc ) . Once you catch it go to F10. menu and select the right information. Once selected a message will tell you to switch to channel 6 and contact Nellis Approach by pressing "Spacebar". You can refer to the videos in the first post to see how all custom ATC works. Are Tigers datalinked? Maybe they are only visible on the wingman radar and shared. Client/slot is for using the mission with a human RIO. If someone has used this mission as a coop pilot/RIO please let me know how was the experience! :) Link to comment Share on other sites More sharing options...
draconus Posted April 11, 2019 Share Posted April 11, 2019 At the end of the mission 2 you are asked to "grab ATIS" ( listen to CH2 ) , here you can hear "information" ( Alpha, Bravo, Charlie, etc ) . Once you catch it go to F10. menu and select the right information. Once selected a message will tell you to switch to channel 6 and contact Nellis Approach by pressing "Spacebar". You can refer to the videos in the first post to see how all custom ATC works. I can see how it works and it works for me ok, I just didn't catch that "information" so didn't know exactly what to choose from F10. On the datalink it may well be the wingman. Thanks, keep up the good job! Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
Ala12Rv-Birdman Posted April 11, 2019 Share Posted April 11, 2019 Great campaign!! I am really enjoying it.. However, this happened to me during mission 3 (night formation): While escorting refueler, everything going right and calm, I received a message "Head stearpoint 3 and RTB". No more messages for the rest of the flight. I got to my parking slot. Shutt down engines and exit mission. Now I have to start the campagin from the very begining. What went wrong? Any way to continue the campaign from mission 4? Thank you!!! Spanish Ala12rv Pilot Nevada TTR // Persian Gulf // Syria // South Atlantic T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat Link to comment Share on other sites More sharing options...
Sephroth Posted April 11, 2019 Share Posted April 11, 2019 I got that message too, but kept flying, saw the F117, then F10 to rtb again. I think it's a bug that the message comes across at all Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
draconus Posted April 12, 2019 Share Posted April 12, 2019 Same mission - when I finally got close to the tanker the RTB message appeared right away but I poked around him for some time and then RTB - after parking Result was still 0. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 12, 2019 Author Share Posted April 12, 2019 Great campaign!! I am really enjoying it.. However, this happened to me during mission 3 (night formation): While escorting refueler, everything going right and calm, I received a message "Head stearpoint 3 and RTB". No more messages for the rest of the flight. I got to my parking slot. Shutt down engines and exit mission. Now I have to start the campagin from the very begining. What went wrong? Any way to continue the campaign from mission 4? Thank you!!! I got that message too, but kept flying, saw the F117, then F10 to rtb again. I think it's a bug that the message comes across at all After the F117 there are a couple of F15E for refueling ( not mandatory ). Once done ( or bingo fuel ) make sure to be over Steerpoint 3 to activate the classic "grab atis" procedure. This campaign requeirs you to be over every steerpoint to activate triggers , I think I'll enlarge trigger zones cause with F14 and RIO management you dont always fly precisely over them. Anyway you can also fly single missions if you want , campaign is just a plus. Same mission - when I finally got close to the tanker the RTB message appeared right away but I poked around him for some time and then RTB - after parking Result was still 0. I think I had fixed this one , do you have the last version? Will investigate anyway. Link to comment Share on other sites More sharing options...
draconus Posted April 12, 2019 Share Posted April 12, 2019 I think I had fixed this one , do you have the last version? Will investigate anyway. Downloaded April 9th. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
Ala12Rv-Birdman Posted April 12, 2019 Share Posted April 12, 2019 ...And has anyone tryed this solution I found in another thread? Does it work? https://forums.eagle.ru/showpost.php?p=1585809&postcount=3 Spanish Ala12rv Pilot Nevada TTR // Persian Gulf // Syria // South Atlantic T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat Link to comment Share on other sites More sharing options...
Ala12Rv-Birdman Posted April 12, 2019 Share Posted April 12, 2019 Another thing... Flyed single mission number 4 (AAR and dogfighting) When I got a gun solution cue and hit the trigger, no guns went out of the nose.. I realized the spacebar key was used both for radio interaction and trigger. I had to pause the fight, assign a free key for the trigger and take the agressor down, one hand on stick and the other on keyboard.. Does that key conflict happen in every mission or maybe it was just a casual issue? Thanks Spanish Ala12rv Pilot Nevada TTR // Persian Gulf // Syria // South Atlantic T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 12, 2019 Author Share Posted April 12, 2019 Another thing... Flyed single mission number 4 (AAR and dogfighting) When I got a gun solution cue and hit the trigger, no guns went out of the nose.. I realized the spacebar key was used both for radio interaction and trigger. I had to pause the fight, assign a free key for the trigger and take the agressor down, one hand on stick and the other on keyboard.. Does that key conflict happen in every mission or maybe it was just a casual issue? Thanks I think in every mission , it pretty much depends on how trigger key is binded. Just clear the keayboard bind and use the one on your HOTAS. Link to comment Share on other sites More sharing options...
draconus Posted April 12, 2019 Share Posted April 12, 2019 ...And has anyone tryed this solution I found in another thread? Does it work? https://forums.eagle.ru/showpost.php?p=1585809&postcount=3 Yes, you can do that but you have to match the stage number with the corresponding mission file name. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 12, 2019 Author Share Posted April 12, 2019 Downloaded April 9th. I have found the issue. I used the same flag for 2 different triggers. Will update tomorrow with other things. Link to comment Share on other sites More sharing options...
beppe_goodoldrebel Posted April 13, 2019 Author Share Posted April 13, 2019 Update! FIXED Mission 3 trigger error ADDED Mission ACM Training Aggressor Link to comment Share on other sites More sharing options...
Recommended Posts