Nybble Posted November 23, 2012 Share Posted November 23, 2012 Hi all, I've been playing though the FC3 beta quite considerably, and the only real issue that stands out to me at the moment is the setup of mapping controls to my joystick. I am using the Thrustmaster Warthog HOTAS and am trying to set my controls to function in a very similar way to that of the A-10c, but there are a few things that seem to be preventing this. For instance, with the HOTAS I can start either of A-10c's engines by moving the throttle from OFF to IDLE, however I cannot find a way to set the F-15 to replicate this. Similarly with the Nav lights, if I set them to the pinky switch on the throttle it acts as a toggle forcing me to flick the switch down to turn them on, then up then down to turn them back off, if you get what I mean. So I was wondering if anyone has found a better way to map the controls than I have. I understand that the aircraft in FC3 have been modeled in a simplistic manner, however I would be rather disappointed to find that I can't set things up to take full advantage of my peripherals. On a closing note, very satisfied with the module as a whole, just looking forward to getting my controls setup perfectly :D Nybble DCS Multiplayer Highlights Reel - Link to comment Share on other sites More sharing options...
Exorcet Posted November 23, 2012 Share Posted November 23, 2012 A-10 and FC use fundamentally different control schemes. I don't think you can replicate on with the other. Your best bet would be to use the programming software that came with the Warthog (I assume it has some). Awaiting: DCS F-15C Win 10 i5-9600KF 4.6 GHz 64 GB RAM RTX2080Ti 11GB -- Win 7 64 i5-6600K 3.6 GHz 32 GB RAM GTX970 4GB -- A-10C, F-5E, Su-27, F-15C, F-14B, F-16C missions in User Files Link to comment Share on other sites More sharing options...
159th_Viper Posted November 23, 2012 Share Posted November 23, 2012 (edited) ......however I cannot find a way to set the F-15 to replicate this.... What I do is the following: Left Engine Start = JOY_BTN30 Right Engine Start = JOY_BTN29 Now with the Warthog it is actually the movement from IDLE to OFF which is the input. In other words, you start off at a cold-start with the throttle levers to IDLE. When you want to start, all you do is move them from IDLE to OFF and then back to IDLE again in one swift movement and that will spool the engines. I know, not strictly the same as the A-10C but close enough to simulate an engine start with the throttle levers, for me at least :) Edited November 23, 2012 by 159th_Viper Novice or Veteran looking for an alternative MP career? Click me to commence your Journey of Pillage and Plunder! [sIGPIC][/sIGPIC] '....And when I get to Heaven, to St Peter I will tell.... One more Soldier reporting Sir, I've served my time in Hell......' Link to comment Share on other sites More sharing options...
Nybble Posted November 23, 2012 Author Share Posted November 23, 2012 Cheers Viper, that should be enough to keep me happy :) DCS Multiplayer Highlights Reel - Link to comment Share on other sites More sharing options...
Punisher74 Posted May 28, 2015 Share Posted May 28, 2015 If you use those buttons you cannot use the idle to off to shutdown the engines. Thanks, Lt. Commander Jason "Punisher" M Hardware: i7 10700K 5 GHz Quad Core, Water-cooled , 32GBs 2400 DDR4 RAM, MSI Intel Z470A GAMING MB, MSI RTX 3080 GPU W/10GBs GDDR6X, 512GB NVME.2 SSD, 1TB NVME.2 SSD, 2TB External SSD, 2 512Gb SSD's & 1 350 Gb HARDDRIVE, WinWing Orion 2 Stick Base and Throttle Base, Quest 2, Windows 11 (64bit) Link to comment Share on other sites More sharing options...
Azrayen Posted May 28, 2015 Share Posted May 28, 2015 3 years... ;) Link to comment Share on other sites More sharing options...
Pikey Posted May 28, 2015 Share Posted May 28, 2015 It's a pretty good resurrection indeed. Definite signs of decay plus a decent amount of digging needed to get it to the surface :) ___________________________________________________________________________ SIMPLE SCENERY SAVING * SIMPLE GROUP SAVING * SIMPLE STATIC SAVING * Link to comment Share on other sites More sharing options...
ShuRugal Posted May 29, 2015 Share Posted May 29, 2015 It is possible that recent flooding may have swamped the grave and floated the corpse? Link to comment Share on other sites More sharing options...
Recommended Posts