Jump to content

New nVidia User - What Settings in Control Panel for DCS?


imacken

Recommended Posts

My 30" monitor only runs off of Dual DVI (not display port). Seems the firmware is geared more towards Display Port. Do you think it would have any benefit for use of the Dual DVI?

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Link to comment
Share on other sites

My thoughts exactly, I am always hesitant with firmware updates if all is well before,, I cringe LOL

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Link to comment
Share on other sites

Nvidia control panel AA , is broken in this game . Just use the in game settings don't waste your time . Until this is fixed . 1.5 was great . 2.5 still beta .

Gigabyte - X570 UD ~ Ryzen - 5600X @ 4.7 - Pulse - RX-6800 -  XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 .

I'm a dot . Pico Nero 3 link VR . @ 4k

Win 11 Pro 64Bit .

Link to comment
Share on other sites

I have got better performance by switching off Vsync in DCS and setting NCP to “Fast” Vsync.

i9-13900K @ 6.2GHz oc | ASUS ROG MAXIMUS Z790 HERO | 64GB DDR5 5600MHz | iCUE H150i Liquid CPU Cooler | 24GB GeForce RTX 4090 | Windows 11 Home | 2TB Samsung 980 PRO NVMe | Corsair RM1000x | LG 48GQ900-B 4K OLED Monitor | CH Fighterstick | Ch Pro Throttle | CH Pro Pedals | TrackIR 5

Link to comment
Share on other sites

I have got better performance by switching off Vsync in DCS and setting NCP to “Fast” Vsync.

 

Same here, DCS VSync is OFF, Fast Vsync enabled, Frame Limiter V2 set to 59fps in Nvidia Profile Inspector and Max Rendered Frames set at 1 - the result is zero vertical screen tearing and the latency is perfectly smooth with consistently high FPS.


Edited by Mustang
Link to comment
Share on other sites

I dont see any "Frame Limiter V2" in NVidia Inspector?

1498769205_FrameLimiter.png.4da1746e23c71833db7a07ae5d3d4b32.png

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Link to comment
Share on other sites

The only thing that I see close to that is "Frame Limiter 2" but that has no option to set to 59, Maybe I need an updated version of Inspector?

2099578246_FrameLimiter2.thumb.png.888d34123e040e9006449457852b9049.png

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Link to comment
Share on other sites

Oh,, thank you sir! What a difference that makes. All the years of fiddling and reading, I never came across any mention of this. Many thanks. By the way, I was limiting my frames via autoexec.cfg "MAX FPS= 60". I was doing that because my 30" monitor refresh rate is only 60 Hz. Is it still advisable with this change? Thanks,

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Link to comment
Share on other sites

Oh,, thank you sir! What a difference that makes. All the years of fiddling and reading, I never came across any mention of this. Many thanks. By the way, I was limiting my frames via autoexec.cfg "MAX FPS= 60". I was doing that because my 30" monitor refresh rate is only 60 Hz. Is it still advisable with this change? Thanks,

 

No just leave the MaxFPS setting alone at the default 180 and let the FPS Limiter in nvidia inspector do it's thing.

Link to comment
Share on other sites

  • 4 weeks later...
Same here, DCS VSync is OFF, Fast Vsync enabled, Frame Limiter V2 set to 59fps in Nvidia Profile Inspector and Max Rendered Frames set at 1 - the result is zero vertical screen tearing and the latency is perfectly smooth with consistently high FPS.

:thumbup: Thank you Mustang

I´ll try exactly that setting with my "new" just installed 1080ti on my 29" 60Hz monitor

 

Edit: Works great, Thanks again!


Edited by Ganesh
Works great...

regards Ganesh

She: "Your orders from ED have reached a total amount of $871,88 and your hardware expenses are countless..."
Me: "I can´t invest my money much better until i wait for Germanys Next Top Model": The
Bo-105 PAH1A1

+ Vulkan & continuous work on multithread & VR optimization!

Asus Z490E - 10900k@5,3GHz - 64GB 3600 DDR4 - 4090FE - Reverb G2 - MFG Crosswinds +DamperMod - Selfmade TableMounts - Centered VirPil T-50 Base with 20cm Extension - TM Warthog & Hornet Grip - TM Throttle +SlewMod - Pimped MSFFB2 for Huey - JetSeat SE on a sawn out office Chair - PointCTRL

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...