Jump to content

Using two warthogs at once?


Thunderchief2000

Recommended Posts

Hi can anyone tell me if it is possible to run two warthogs at the same time on DCS?

 

Because I use my first warthog base with a tube extension and the F/A18 stick I have this idea to buy another Magnetic Base and use my A10c/F16 stick on it as a side stick for the F16 module.

 

I assume it should work because it looks like they have a separate ID, but it would be nice to know for sure before stumping up the cash for the extra base.

 

(as a crazy idea what about two throttles?)

 

Thanks

Link to comment
Share on other sites

Not sure if this would work, but you could try following: Use one TM base free and ingame mapped and the second one with a TARGET profile, as TARGET will morph your controllers included in the profile to a separate virtual controller. This should work, also for the throttle. Besides that, i would rather purchase a VPC WarBRD base instead of a second TM base. It´s a bit more expensive, but you´ll get what you´ll pay for. I got a similar setup as you are planning to get. TM base with extension and TM F/A-18 grip on top center mounted, VPC WarBRD base with TM A-10/F-16 grip as sidestick. Absolutely happy with the WarBRD base and i would never exchange it for a second TM base.

 

Cheers

Phanteks EvolvX / Win 11 / i9 12900K / MSI Z690 Carbon / MSI Suprim RTX 3090 / 64GB G.Skill Trident Z  DDR5-6000 / 1TB PCIe 4.0 NVMe SSD / 2TB PCIe 3.0 NVMe SSD / 2TB SATA SSD / 1TB SATA SSD / Alphacool Eisbaer Aurora Pro 360 / beQuiet StraightPower 1200W

RSEAT S1 / VPC T50 CM2 + 300mm extension + Realsimulator F18 CGRH / VPC WarBRD + TM Warthog grip / WinWing F/A-18 Super Taurus / 4x TM Cougar MFD / TM TPR / HP Reverb G2

Link to comment
Share on other sites

Yes select the center stick for the ctr stk ac and the side stick for the f16 share the rudder pedals and either use the Cougar throttle for the viper and the warthog for the rest that’s my plan plus adding a collective for helos

BlackeyCole 20years usaf

XP-11. Dcs 2.5OB

Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram

 

 

New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday.

Link to comment
Share on other sites

Thanks for the reply, I've not considered the Virpl base, I'll have a look at it, its a little more than the warthog though.

 

Cheers.

 

No problem. Yes the WarBRD is a bit more than the TM base, but worth every penny.

Phanteks EvolvX / Win 11 / i9 12900K / MSI Z690 Carbon / MSI Suprim RTX 3090 / 64GB G.Skill Trident Z  DDR5-6000 / 1TB PCIe 4.0 NVMe SSD / 2TB PCIe 3.0 NVMe SSD / 2TB SATA SSD / 1TB SATA SSD / Alphacool Eisbaer Aurora Pro 360 / beQuiet StraightPower 1200W

RSEAT S1 / VPC T50 CM2 + 300mm extension + Realsimulator F18 CGRH / VPC WarBRD + TM Warthog grip / WinWing F/A-18 Super Taurus / 4x TM Cougar MFD / TM TPR / HP Reverb G2

Link to comment
Share on other sites

I just use a switched USB hub to switch between sticks. Works for me!

ALienware aurora R7, Windows 10 home 64 bit, i7-8700, RTX2080ti, 32 GB Ram, 2TB SATA hard drive, 250 GB M2 SSD, 500GB SATA SSD, Warthog Hotas, Thrustmaster tpr pedals, jet seat, BenQ SW2500PT, Oculus rift S

Link to comment
Share on other sites

  • 2 weeks later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...