Alacc17 Posted January 26, 2018 Share Posted January 26, 2018 (edited) Did you copy the files mentioned earlier? What files do you mean? I use Bell47_2 V-2 from your post #140. With bin folder from Uh-1, of course. I tried my old input for this Bell47, new renamed input folder from Uh-1 and new input from scratch. In 1.5.8 and 2.2. All work fine. Except trimmer. Edited January 26, 2018 by Alacc17 фил фоба не слаще... ________________ i5-3570K, 24GB DDR3-1600, 6GB GTX1060, Win7x64 Link to comment Share on other sites More sharing options...
Holton181 Posted January 26, 2018 Share Posted January 26, 2018 What files do you mean? I use Bell47_2 V-2 from your post #140. With bin folder from Uh-1, of course. I tried my old input for this Bell47, new renamed input folder from Uh-1 and new input from scratch. In 1.5.8 and 2.2. All work fine. Except trimmer. I guess it's the files mentioned in my post, #145: To get the throttle to work, copy device_init.lua and devices.lua from UH-1H\Cockpit\Scripts and place in corresponding location for the 47. This is for the throttle, I haven't tried the trim so I can't answer if it affects the trim too but I would guess it does. 1 Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Holton181 Posted January 26, 2018 Share Posted January 26, 2018 I am glad she works for you guys. The more I think about it, I MAY have done a few edits to get this to work. What they were escapes me presently! It has been a while. I will up-date the first post with the link, and do the same in the mods forum. I will add the updated install instructions and any code you guys give me permission to add. All should be able to enjoy her! Give me a day or so to put it together into a package. I may also play with the code a bit and see if.................Weapons? :music_whistling: I think I put the cockpit into a Kiowa! Stretchers too! Now where did I park that Chopper.............. So..... I assume permission is granted to add the needed code? :DWill you do this on the newest version on upuaut's Dropbox? It was edited less than two weeks ago, it seems he is still working on it from time to time. Or have someone (you?) taken over responsibility for it? That version needs some tweaking though, as it is now there is no cockpit showing. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Alacc17 Posted January 26, 2018 Share Posted January 26, 2018 I guess it's the files mentioned in my post, #145... OMG! Where my eyes? )) Now it really works. Thanks so much again and again. фил фоба не слаще... ________________ i5-3570K, 24GB DDR3-1600, 6GB GTX1060, Win7x64 Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 26, 2018 Share Posted January 26, 2018 Will you do this on the newest version on upuaut's Dropbox? It was edited less than two weeks ago, it seems he is still working on it from time to time. Or have someone (you?) taken over responsibility for it? That version needs some tweaking though, as it is now there is no cockpit showing.I do not have access to the core files. Or to the drop box. Other than to down load it, same as anyone else. Early in the development, He did send me the mod so I could help with a few issues. I suggested the stretchers......And he did listen! Since that time, He has kept it "in house" If he is still working on it. this is GREAT news! I would love to see it move to beta stage. So I suggest a community petition, signed and sent to upuaut, Asking for a beta version with perhaps a few more weapons. With offers to help. I think this is one of the most popular mods released in some time! We can then ask crazyeddie for a few more liveries. Vietnam and Korea come to mind. We have a Mash version now! I will try to maintain my working version, with any community fixes, and keep it available until we hear from him. He has not posted in some time................ So, Who would like to be the "point man" and try to communicate with him? We would all love at least a updated post from him! "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Holton181 Posted January 26, 2018 Share Posted January 26, 2018 When comparing the content of your version, Hawkeye60, to the latest I downloaded yesterday from upuaut's Dropbox with WinMerge, there was no difference! I then tried to use the official ones again, and now it worked too? I must have messed up when trying out before. Anyhow, I don't think you need to provide your version as like you plan, after all it turned up to be the same as the latest from upuaut (entry.lua last edited January 14 2018, he was online here that same day). We'll see if we get some more (silent and secret) help from him ones 2.5 is released. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 26, 2018 Share Posted January 26, 2018 Strange that you were not the only one with issues. And using my version fixed every one! Perhaps others who had problems could try the original version to see if it works for them as well. Ah the mysteries of modding! We will keep the link as is for now. "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Dugong Posted January 27, 2018 Share Posted January 27, 2018 Is it possible to know which is the correct version to use? I have found a 371mb package, a 433mb and a 431mb. The 433mb works but the weapons can't be fired. The 371mb only seems to work as an AI aircraft. Are the weapons supposed to work or are they for show only? Regardless of all that, thanks to the modders who made this, it's really cool and the FM feels great! Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 27, 2018 Share Posted January 27, 2018 Is it possible to know which is the correct version to use? I have found a 371mb package, a 433mb and a 431mb. The 433mb works but the weapons can't be fired. The 371mb only seems to work as an AI aircraft. Are the weapons supposed to work or are they for show only? Regardless of all that, thanks to the modders who made this, it's really cool and the FM feels great! I would ask upuaut. He is the keeper of the magic! Or use whatever suits your mood! I do not think weapons work but I could be wrong. I DO know i can not add any new ones and have them work. YMMV "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
swiss_lipo Posted February 17, 2018 Share Posted February 17, 2018 (edited) Hi everyone, I am giving the Bell 47 another try and I must say the previous posts really helped me about the throttle and all. Yet, now I have this annoying issue with a huge flame appearing on the right . Does anyone know about this ? is it a known issue ? Thanks for any help... Edited February 17, 2018 by swiss_lipo Link to comment Share on other sites More sharing options...
Cibit Posted February 22, 2018 Share Posted February 22, 2018 Anyone got this working in 2.5? i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
Hawkeye60 Posted February 22, 2018 Share Posted February 22, 2018 Anyone got this working in 2.5? See post 140 "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Cibit Posted February 22, 2018 Share Posted February 22, 2018 This is the version I am trying to get working Hawkeye I will check in case I borked something :) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
Cibit Posted February 22, 2018 Share Posted February 22, 2018 My bad. I had an original Bell 47 installed in open beta which of course is 2.5 obviously caused a conflict. All good now thanks mate i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
todd022 Posted February 22, 2018 Share Posted February 22, 2018 That was really well done and entertaining. Thanks [SIGPIC][/SIGPIC] Link to comment Share on other sites More sharing options...
Magot Posted March 28, 2018 Share Posted March 28, 2018 My bad. I had an original Bell 47 installed in open beta which of course is 2.5 obviously caused a conflict. All good now thanks mate It works for you under 2.5? In which path of DCS you have installed Sioux? I have download mod from post 140, but looks like that its not loaded in game. I tried mods folder, core mods folder, saved folder .. Thanks for help. Link to comment Share on other sites More sharing options...
Holton181 Posted March 29, 2018 Share Posted March 29, 2018 It works for you under 2.5? In which path of DCS you have installed Sioux? I have download mod from post 140, but looks like that its not loaded in game. I tried mods folder, core mods folder, saved folder .. Thanks for help.It works for me in 2.5. It shall be installed in the saved games folder, DCS.Open...\Mods\aircrafts\. Did you remember to copy the bin folder from the Huey? Also it has been reported by some that you have to assign controller axis to it before you can enter the cockpit. If it's installed correctly it shall turn up in the module manager too. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Magot Posted March 29, 2018 Share Posted March 29, 2018 (edited) nope do not work as you write for 2.5 in 1.5.8 all work OK in this path C:\Users\(name)\Saved Games\DCS\Mods\aircraft\Bell47_2 V-2 in 2.5 same content of course with BIN folder UH-1H included in same path do not work, its not loaded. In module manager its not presented. C:\Users\(name)\Saved Games\DCS.openbeta\Mods\aircraft\Bell47_2 V-2 Is need in any place in 2.5 in settings allowed loading mods? Edited March 29, 2018 by Magot Link to comment Share on other sites More sharing options...
Holton181 Posted March 29, 2018 Share Posted March 29, 2018 Is need in any place in 2.5 in settings allowed loading mods? No, nothing. And did you go into controller setup to see if it's listed there? And module manager? Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Magot Posted March 29, 2018 Share Posted March 29, 2018 yes, but nothing there. I tried load other 2.5 mods and looks like that its general problem. No mods loaded. I tried repair DCS and still nothing. Last step is all unnistall and clear install .. Link to comment Share on other sites More sharing options...
Hawkeye60 Posted March 29, 2018 Share Posted March 29, 2018 See this thread, https://forums.eagle.ru/showthread.php?t=186497&highlight=bell read the last few posts. Link to working version inside for 2.5 "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Magot Posted March 29, 2018 Share Posted March 29, 2018 (edited) Thanks, I have fixed it. After complete reinstall is all works ok. Looks like that incremental update from 2.2 to 2.5 was not best way. So only weapons do not work. Or is there any fix on it? Or its limitation this alpha version? Edited March 29, 2018 by Magot Link to comment Share on other sites More sharing options...
SUNTSAG Posted April 1, 2018 Share Posted April 1, 2018 Hi All, Please find below a link to a few liveries I wanted to put together for this helo. I am a novice skinner but please enjoy. Simply download the liveries and after extracting them you will be left with a folder called Liveries. Replace the current Liveries folder with this one. It contains all the previous skins that were available, so you won't loose those. https://drive.google.com/file/d/1EPOvtfoJks1z0Cdz4Ph5sJw0lpGx7XnO/view?usp=sharing Carabinieri: US Army Camo: US Army Winter Camo: British Army UN: L.V.P.D. Callsign: NAKED My YouTube Channel [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Holton181 Posted May 1, 2018 Share Posted May 1, 2018 So, unsurprisingly the Bell 47 stopped working in 2.5.1. Don't despair though! /H Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
russma Posted December 3, 2018 Share Posted December 3, 2018 Does Upgaut's Bell47_2 also work in DCS version 2.5.3? If yes, how should you install? Thanks for your help Link to comment Share on other sites More sharing options...
Recommended Posts