VpR81 Posted March 5, 2020 Author Share Posted March 5, 2020 Use a hairdryer at full to heat up the Loctite before you unscrew the screws. Makes life easier. But only the blue, for red Loctite you will need a bunsen burner instead of a hairdryer ;) Phanteks EvolvX / Win 11 / i9 12900K / MSI Z690 Carbon / MSI Suprim RTX 3090 / 64GB G.Skill Trident Z DDR5-6000 / 1TB PCIe 4.0 NVMe SSD / 2TB PCIe 3.0 NVMe SSD / 2TB SATA SSD / 1TB SATA SSD / Alphacool Eisbaer Aurora Pro 360 / beQuiet StraightPower 1200W RSEAT S1 / VPC T50 CM2 + 300mm extension + Realsimulator F18 CGRH / VPC WarBRD + TM Warthog grip / WinWing F/A-18 Super Taurus / 4x TM Cougar MFD / TM TPR / HP Reverb G2 Link to comment Share on other sites More sharing options...
X-31_VECTOR Posted March 5, 2020 Share Posted March 5, 2020 Great point about the heat! I've used a soldering iron applied to the head of a screw to break red. Each one has a temp above which it will break down, and it's higher for the red -- 250C/500F. There should be support groups for people who have had to remove tiny, soft screws held in with red threadlocker. "The horror..." Link to comment Share on other sites More sharing options...
Recommended Posts