VR with 2080 TI SLI DCS Crashes? - Page 3 - ED Forums
 


Notices

Reply
 
Thread Tools Display Modes
Old 01-12-2019, 01:26 AM   #21
Naruto
Junior Member
 
Join Date: Apr 2005
Posts: 70
Default

Quote:
Originally Posted by hansangb View Post
Could you give this a try? Curious what you see in terms of FPS.

https://forums.eagle.ru/showpost.php...6&postcount=10

The setting I used was (toggle the shadows on and off on both sides of the column)

What pixel density do you want me to try it at?
__________________
System specs: Intel i7-9900k OC 5.1Ghz, 32 GB PC3200 G.SKILL TridentZ RGB RAM, Asus Strix 2080 TI OC SLI, Asus Z390 Workstation Pro, 970 EVO 1TB M.2 PCIe NVMe and many other SSDs, Alienware 3418DW Widescreen 120 Hz G-Sync Monitor, Corsair H150i PRO RGB CPU Cooler

Flightgear: Oculus Rift, TM Warthog, TM TPR Rudder, Cougar MFDs, Jetseat (Coming Soon), Trackir 5, Sennheiser Game One Headset
Naruto is online now   Reply With Quote
Old 01-12-2019, 01:45 AM   #22
Naruto
Junior Member
 
Join Date: Apr 2005
Posts: 70
Default

With a PD of 2.0

FPS is all over the place where I seen it go as low as 29 for a split second when looking at populated areas to 90 when looking at non populated areas. Looking out the HUD at cities with tall buildings anywhere from 43 to 65. If I were to fly over a city and bank 90 degrees looking at the buildings, the FPS is in the 50s but once again flying level looking out HD at a city at a distance FPS I would say would be closer to 47 to 50. The FPS bounces all of the place to get a average is not possible. I just feels smooth and did not get jittery. This is with stock DCSbeta no mods.
__________________
System specs: Intel i7-9900k OC 5.1Ghz, 32 GB PC3200 G.SKILL TridentZ RGB RAM, Asus Strix 2080 TI OC SLI, Asus Z390 Workstation Pro, 970 EVO 1TB M.2 PCIe NVMe and many other SSDs, Alienware 3418DW Widescreen 120 Hz G-Sync Monitor, Corsair H150i PRO RGB CPU Cooler

Flightgear: Oculus Rift, TM Warthog, TM TPR Rudder, Cougar MFDs, Jetseat (Coming Soon), Trackir 5, Sennheiser Game One Headset
Naruto is online now   Reply With Quote
Old 01-12-2019, 02:29 AM   #23
etherbattx
Member
 
Join Date: May 2018
Posts: 179
Default

Quote:
Originally Posted by Naruto View Post
I thought turning off aws allowed it to run higher than 45 which I did using the OculusTrayTool by setting DCS to off in a profile and globally?

if it’s only doing 45 or 90, and nothing in between, AWS must still be on.
etherbattx is offline   Reply With Quote
Old 01-12-2019, 02:32 AM   #24
hansangb
Veteran
 
hansangb's Avatar
 
Join Date: May 2013
Location: New York
Posts: 3,696
Default

Quote:
Originally Posted by Naruto View Post
With a PD of 2.0

FPS is all over the place where I seen it go as low as 29 for a split second when looking at populated areas to 90 when looking at non populated areas. Looking out the HUD at cities with tall buildings anywhere from 43 to 65. If I were to fly over a city and bank 90 degrees looking at the buildings, the FPS is in the 50s but once again flying level looking out HD at a city at a distance FPS I would say would be closer to 47 to 50. The FPS bounces all of the place to get a average is not possible. I just feels smooth and did not get jittery. This is with stock DCSbeta no mods.
Gotcha. Yeah, I tried 2.0 I think. But it didn't seem to make too much of a difference. But Shadows really makes FPS jump all over the place.
__________________
hsb
HW Spec in Spoiler
---
Spoiler:
i7-8700K Delid/OC'ed to 5.1GHz, EVGA Z370 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, JetSeat, Warthog, TM MFDs, Komodo Huey set, CV1
hansangb is offline   Reply With Quote
Old 01-12-2019, 05:22 AM   #25
Naruto
Junior Member
 
Join Date: Apr 2005
Posts: 70
Default

Quote:
Originally Posted by etherbattx View Post
if it’s only doing 45 or 90, and nothing in between, AWS must still be on.
Figured out when I had mostly all the settings maxed out is stayed at 45 FPS but when I lowered settings to test hansangb settings, it fluctuates all over from 29 to 90 depending where I was looking but I would say it averaged around 56 FPS if I had to pick a number.

Now with the VR mod in DCSbeta, I was able to increase MSAA to 4X and SAA to 1.5 with max settings and it stayed mostly at 47FPS in Caucus and 45 in Persian Gulf. Viewing heavy populated ares it dropped to about 40 - 43 FPS.

All in all, I am very happy with my setup. Now I just got to get a Primax 5+. BTW - I had the 2080 TIs OC to +130 core and +800 Memory.
__________________
System specs: Intel i7-9900k OC 5.1Ghz, 32 GB PC3200 G.SKILL TridentZ RGB RAM, Asus Strix 2080 TI OC SLI, Asus Z390 Workstation Pro, 970 EVO 1TB M.2 PCIe NVMe and many other SSDs, Alienware 3418DW Widescreen 120 Hz G-Sync Monitor, Corsair H150i PRO RGB CPU Cooler

Flightgear: Oculus Rift, TM Warthog, TM TPR Rudder, Cougar MFDs, Jetseat (Coming Soon), Trackir 5, Sennheiser Game One Headset

Last edited by Naruto; 01-12-2019 at 05:25 AM.
Naruto is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 01:49 PM. vBulletin Skin by ForumMonkeys. Powered by vBulletin®.
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.