H-J-P Posted September 24, 2018 Share Posted September 24, 2018 (edited) Ray, thanks for the video. How can you press OSDB 19 in the Ikaus cockpit, if you have deleted all? I did not understand that yet. Edited September 24, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 24, 2018 Share Posted September 24, 2018 Ray, How can you press OSB19 in the Ikaus cockpit, if you have deleted all? I did not understand that yet. I was surprise too. that were a bleu lined squere where was the deleted botton. and of cousre I was not able to do anything because it was not supposed to be theire iF It it hapen again, I will try to get pictures or video. tha bad pars is that I thing it make DCS freese then DCS crached. I remove MFCD from export script too now. It may never happen again. We shall see Link to comment Share on other sites More sharing options...
raymondabel Posted September 24, 2018 Share Posted September 24, 2018 (edited) I love Ikarus, but on the A-10 profile I get "Stuck MFCD Keys" flags every time use it. Is anyone else having this problem? Any suggestions for how to fix it? Look that I am not the only one.... I Have F16MFCD so I deleted all the ikarus OSD* from a-10c.ikarus. the same with a-10c.xml and I just did witt DCS-script, a-10c.LUA. now, I am testing. so far, looking good Ray Edited September 27, 2018 by raymondabel Link to comment Share on other sites More sharing options...
H-J-P Posted September 24, 2018 Share Posted September 24, 2018 I saw in DCS.log that you use F16 MFCDs. With the next crash also the export.log would be important. Otherwise nothing remarkable was to be seen. Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 24, 2018 Share Posted September 24, 2018 I saw in DCS.log that you use F16 MFCDs. With the next crash also the export.log would be important. Otherwise nothing remarkable was to be seen. ExportScript Version: 1.1.0 10:19:12:018 : Create UDPSender 10:19:12:018 : Create UDPListner 10:19:37:117 : File Path: C:\Users\Ray\Saved Games\DCS\Scripts\DCS-ExportScript\ExportsModules\A-10C.lua 10:19:37:123 : File 'C:\Users\Ray\Saved Games\DCS\Scripts\DCS-ExportScript\ExportsModules\A-10C.lua' loaded 10:19:37:123 : Version: 10:19:37:123 : Config: 1.1.0 10:19:37:123 : Maps: 1.1.0 10:19:37:123 : Tools: 1.1.1 10:19:37:123 : genericRadio: 1.1.0 10:19:37:123 : A10C: 1.1.0 10:19:37:123 : ExportScript: 1.1.0 10:19:37:123 : Detected Map: CaucasusBase 10:27:15:662 : ====== Logfile close ====== Link to comment Share on other sites More sharing options...
H-J-P Posted September 24, 2018 Share Posted September 24, 2018 Everything looks good. :thumbup: Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 25, 2018 Share Posted September 25, 2018 (edited) MFCD stuck key it happen yesterday during a MP mission. I was SCAR primo I was mad... and this morningIkarus_20180925102336.rar Edited September 25, 2018 by raymondabel Link to comment Share on other sites More sharing options...
H-J-P Posted September 25, 2018 Share Posted September 25, 2018 (edited) Ray, that has nothing to do with Ikarus or the export - scripts. You are using your F16 frame now. But it's nice to see it happen with it. There is a way to change those behaviors. Unfortunately you have to change the clickabledata.lua of the A-10C. -- Left MFCDI elements["PNT-BTN-MFD-L-01"] = {class = {class_type.BTN}, hint = _("OSB 1"), device = devices.MFCD_LEFT, action = {device_commands.Button_1}, stop_action = {device_commands.Button_1}, arg = {300}, arg_value = {1.0}, arg_lim = {{0.0, 1.0}}, use_release_message = {true} } ..... Change true to false for all MFCD - buttons. Or just press the clamping button a second time. Edited September 25, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 25, 2018 Share Posted September 25, 2018 Ray, that has nothing to do with Ikarus or the export - scripts. You are using your F16 frame now. But it's nice to see it happen with it. There is a way to change those behaviors. Unfortunately you have to change the clickabledata.lua of the A-10C. -- Left MFCDI elements["PNT-BTN-MFD-L-01"] = {class = {class_type.BTN}, hint = _("OSB 1"), device = devices.MFCD_LEFT, action = {device_commands.Button_1}, stop_action = {device_commands.Button_1}, arg = {300}, arg_value = {1.0}, arg_lim = {{0.0, 1.0}}, use_release_message = {true} } ..... Change true to false for all MFCD - buttons. Done Link to comment Share on other sites More sharing options...
raymondabel Posted September 25, 2018 Share Posted September 25, 2018 (edited) Ray, that has nothing to do with Ikarus or the export - scripts. You are using your F16 frame now. But it's nice to see it happen with it. There is a way to change those behaviors. Unfortunately you have to change the clickabledata.lua of the A-10C. -- Left MFCDI elements["PNT-BTN-MFD-L-01"] = {class = {class_type.BTN}, hint = _("OSB 1"), device = devices.MFCD_LEFT, action = {device_commands.Button_1}, stop_action = {device_commands.Button_1}, arg = {300}, arg_value = {1.0}, arg_lim = {{0.0, 1.0}}, use_release_message = {true} } ..... Change true to false for all MFCD - buttons. Just press the clamping button a second time. because pressing all keys, clicking everywhere did not change anything BTW: I am impress bu you knowlegde og the DCS confif files Edited September 25, 2018 by raymondabel Link to comment Share on other sites More sharing options...
H-J-P Posted September 25, 2018 Share Posted September 25, 2018 Thanks Ray. The button with the pink square is the one that is stuck. Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 25, 2018 Share Posted September 25, 2018 Thanks Ray. The button with the pink square is the one that is stuck. I figure that out. Maybe I should upload the video but with the lua modify, I should not have the situation again Link to comment Share on other sites More sharing options...
McMicha Posted September 25, 2018 Share Posted September 25, 2018 @raymondabel please do a test without the exportscript and check if the keys still get stuck! Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" DCS ExportScript D.A.C. DCS to Arcaze Communicator Ikarus a new Virtual Cockpit Software Deutscher Forums Thread English Forums Thread Hard/Software: AMD Ryzen 7 1800X, 32 GiB RAM, extra SSD for Windows 10 and DCS World, AMD Vega Frontier Edition with 16 GiB VRAM Link to comment Share on other sites More sharing options...
raymondabel Posted September 25, 2018 Share Posted September 25, 2018 @raymondabel please do a test without the exportscript and check if the keys still get stuck! no stuck key so far but Ikarus does not work anymore Link to comment Share on other sites More sharing options...
H-J-P Posted September 25, 2018 Share Posted September 25, 2018 (edited) That is interesting. Ray, are you sure? Of course, Ikarus is not working anymore. This is normal with this configuration. Maybe McMicha has an idea what it's all about. He develops the lua - scripts. Edited September 25, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
Shotgun Dexter Posted September 26, 2018 Share Posted September 26, 2018 I have a dumb question, but is it possible that my Ikarus profile is messing with my controller input. Since I got Ikarus working, the F18C has so much rise, that countering it with full down will not level the plane. If its possible its causing this, what can I do to fix? Any help would be much appreciated. Link to comment Share on other sites More sharing options...
H-J-P Posted September 26, 2018 Share Posted September 26, 2018 There are no dumb questions. Only stupid answers. Ikarus does not normally affect your controllers. Unless you are using the wrong DCS - IDs somewhere. You created your own Ikarus profile? Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 27, 2018 Share Posted September 27, 2018 DCS crash again tonight during a MP game. I reboot with my old helios setting. No crash. I do not know what is the problem. Thing for sure, if I let the OSB* then I get stuck MFCD key. I F I delete them then I got DCS to crash. I am avalable if you wanna do some more testing but I thing that I am not going to plys MP with Ikarus again. To bad because it is very hard work but I feel the profile would have to be revisited and this is something that I do not have the knowledge to help the SDA team. I am just à gamer. Link to comment Share on other sites More sharing options...
raymondabel Posted September 27, 2018 Share Posted September 27, 2018 (edited) DCS crash again tonight during a MP game. I reboot with my old helios setting. No crash. I do not know what is the problem. Thing for sure, if I let the OSB* then I get stuck MFCD key. I F I delete them then I got DCS to crash. I am avalable if you wanna do some more testing but I thing that I am not going to plys MP with Ikarus again. To bad because it is very hard work but I feel the profile would have to be revisited and this is something that I do not have the knowledge to help the SDA team. I am just à gamer. I just see that you work on it (Version 1.4.5.3s) I will give it an othe chance. What should I test? feel free to contact me directly Edit: stuck key steel an issue. Next step: deleting the OSB* Ray Edited September 27, 2018 by raymondabel Link to comment Share on other sites More sharing options...
raymondabel Posted September 27, 2018 Share Posted September 27, 2018 (edited) testing Ikarus-master V1.4.5.3s My modifications: - OSB* are deleted from a-10c.ikarus - moving cokpot switch and panal to fit beween my F16 MFCD (that should have absolutly no i,pact on ikarus behavior) Results: - no crash so far in solo. - here is my logs. You will see that theire is some exeption on ikarus .log.txt - ILS and TACAN : Work a lot better ! NOTE: external light switch could be removed because (like OSB*) it does not work with HOTASLogs_20180927090429.rar Edited September 27, 2018 by raymondabel Link to comment Share on other sites More sharing options...
McMicha Posted September 28, 2018 Share Posted September 28, 2018 Right MFCD stuck key OSDB 19 then DCS crached Hello raymondabel I've tried and tested a lot around. Also I get it that a key is stuck and the corresponding message appears, but I have to hold the key down for several seconds. But I can make it common again by clicking on it a few times. But I never crashed DCS, so that must have another reason. I also have no problems pressing the MFCD button over a DirectX button (in my case a jostick button). You also don't have to delete anything in the A-10C.xml or A-10C.lua file, it's enough to delete the buttons from the Ikarus profile. In your posted log files you don't see any error that could lead to a crash of DCS, you actually don't see any error (except in the one Ikarus log). I honestly don't know what's different about you that you have such problems. Maybe it's TacView. I myself have never run the ExportScript together with TacView. Maybe I can test that.... Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" DCS ExportScript D.A.C. DCS to Arcaze Communicator Ikarus a new Virtual Cockpit Software Deutscher Forums Thread English Forums Thread Hard/Software: AMD Ryzen 7 1800X, 32 GiB RAM, extra SSD for Windows 10 and DCS World, AMD Vega Frontier Edition with 16 GiB VRAM Link to comment Share on other sites More sharing options...
raymondabel Posted September 28, 2018 Share Posted September 28, 2018 Hello raymondabel I've tried and tested a lot around. Also I get it that a key is stuck and the corresponding message appears, but I have to hold the key down for several seconds. But I can make it common again by clicking on it a few times. But I never crashed DCS, so that must have another reason. I also have no problems pressing the MFCD button over a DirectX button (in my case a jostick button). You also don't have to delete anything in the A-10C.xml or A-10C.lua file, it's enough to delete the buttons from the Ikarus profile. In your posted log files you don't see any error that could lead to a crash of DCS, you actually don't see any error (except in the one Ikarus log). I honestly don't know what's different about you that you have such problems. Maybe it's TacView. I myself have never run the ExportScript together with TacView. Maybe I can test that.... allo first: thanks to spend some time trying to understand the issues I am facing. here is my script rep. You will see that I use Universal Radio that is mandatory to play with my clan. Tachview is not mandatory but no one in my clan has the issues that I have trying to use Ikarus. Also: I wrote "crash" I should have wrote : Freeze" and have to "alt-ctrl-delete" to kill DCS process. That may explain why theire is no error in my logs. As far as OSD* are concern. I simply deleted those as well as the external light switch. Last thing: I put my old Helio profile (using OvGME is easiy to switch Ikarus to Helios and Helio to Ikarus) and no issue with Helios BUT running with Helios is like driving my old Honda Civic whan I have a brand new car just beside it One again, thanks for your time RayScripts_20180928080250.rar Link to comment Share on other sites More sharing options...
H-J-P Posted September 28, 2018 Share Posted September 28, 2018 (edited) @Ray, so you know what makes sense, the following information: The *.Ikarus is only responsible for the layout and the parameters to be sent. The *.xml file contains all the DCS IDs we have defined there. You can then use it in the *.Ikarus file. If you do not want to use something, delete it in the *.Ikarus file or in Ikarus itself. It will not be used anymore. It will not be sent anymore. The data that comes then from DCS, have no effect. They are simply discarded. Thanks for your support. Edited September 28, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
raymondabel Posted September 28, 2018 Share Posted September 28, 2018 @Ray, so you know what makes sense, the following information: The *.Ikarus is only responsible for the layout and the parameters to be sent. The *.xml file contains all the DCS IDs we have defined there. You can then use it in the *.Ikarus file. If you do not want to use something, then delete it in the *.Icarus file. It will not be used anymore. It will not be sent anymore. The data that comes then from DCS, have no effect. They are simply discarded. so deleting an object in *Ikarus has NO impact because the object will not be call by anything and will not call anything. Right? Link to comment Share on other sites More sharing options...
H-J-P Posted September 28, 2018 Share Posted September 28, 2018 (edited) I made it today, DCS is frozen ... Interesting ... I'm not here to say what I think ... (****) Edited September 28, 2018 by H-J-P Simpit Software by SDA "SIMPIT DEVELOPER ASSOCIATION" https://github.com/s-d-a/DAC, https://github.com/H-J-P/Ikarus/releases/latest, https://github.com/s-d-a/DCS-ExportScripts, Deutsches Forum, English Forum MSI Z270; INTEL Core i7-7700K, 4x 4,8GHz, Quad-Core "Kaby Lake", GeForce GTX 1080 Ti, TrackIR 5 Pro, TM HOTAS Warthog, MFG Crosswind, Win 10 x64 Pro, 3 x SSD keep it simple ... the 1000 small things ... Link to comment Share on other sites More sharing options...
Recommended Posts