kengou Posted April 16, 2019 Share Posted April 16, 2019 It all started because I noticed a slight jittery left input on the x-axis while centered. I took the base apart to tighten contacts, and I really barely touched anything inside. When I reassembled the base, and plug it into my PC, I get no led lights and windows says it is an unrecognized device. Seems like maybe a problem with the circuit board or the usb connector? But it all seems tight and nothing is visibly disconnected when I checked it again. I’ve had the stick almost 2 years. Can anyone help? Virpil WarBRD | Thrustmaster Hornet Grip | Foxx Mount | Thrustmaster TWCS Throttle | Logitech G Throttle Quadrant | VKB T-Rudder IV | TrackIR 5 AMD Ryzen 5 3600 | Nvidia GTX 1060 6GB | 32GB DDR4 3200 | SSD Link to comment Share on other sites More sharing options...
Sokol1_br Posted April 16, 2019 Share Posted April 16, 2019 (edited) Look for smashed wires, that can happen during base reassembly. Un-plug and plug - if available, the connector of USB cable If is not this, static electricity of your hands could have damage circuit board, is rare but can happens. Edited April 16, 2019 by Sokol1_br Link to comment Share on other sites More sharing options...
kengou Posted April 18, 2019 Author Share Posted April 18, 2019 Look for smashed wires, that can happen during base reassembly. Un-plug and plug - if available, the connector of USB cable If is not this, static electricity of your hands could have damage circuit board, is rare but can happens. THANK YOU! You saved my stick. I opened it up and moved some wires around that might get squeezed by the base being closed up, and it's back and working again. Virpil WarBRD | Thrustmaster Hornet Grip | Foxx Mount | Thrustmaster TWCS Throttle | Logitech G Throttle Quadrant | VKB T-Rudder IV | TrackIR 5 AMD Ryzen 5 3600 | Nvidia GTX 1060 6GB | 32GB DDR4 3200 | SSD Link to comment Share on other sites More sharing options...
Recommended Posts