Jump to content

Inputs different now?


Recommended Posts

After the past 2 updates I noticed that I have to use less left/back stick to take off to hover. I reset control inputs after last update and it reverted to normal but after resetting since the most recent update it remains at less input.

 

Anyone else having this prob?

Intel i9-13900k, Asus Z790-E Gaming Wifi II mobo, 64gb Corsair DDR5-6400 RGB ram 2x32gb XMP2 profile, 2TB Crucial T700 PCIE 5.0 SSD internal, 2TB Samsung 980 Pro PCIE 4.0 SSD internal, Asus Tuf Gaming overclocked Nvidia RTX 4090, Corsair 7000X Case with 5 x 120mm intake fans and 4 x 140mm exhaust fans, side mounted Corsair H150i Elite Capellix 360mm liquid cooler w/Elite LCD with 6 x 120mm fans in push-pull intake configuration 2 x 32" Asus 2560x1440 displays, TrackIR5 w/pro clip, Thrustmaster Warthog stick and throttle, CH Fighterstick Pro and Pebble Beach Velocity pedals. 

Link to comment
Share on other sites

Never had any curves set. What I did notice is that less collective is needed to get airborne, which means less input in cyclic to hover. Kind of weird, need to relearn the damn thing now.

Intel i9-13900k, Asus Z790-E Gaming Wifi II mobo, 64gb Corsair DDR5-6400 RGB ram 2x32gb XMP2 profile, 2TB Crucial T700 PCIE 5.0 SSD internal, 2TB Samsung 980 Pro PCIE 4.0 SSD internal, Asus Tuf Gaming overclocked Nvidia RTX 4090, Corsair 7000X Case with 5 x 120mm intake fans and 4 x 140mm exhaust fans, side mounted Corsair H150i Elite Capellix 360mm liquid cooler w/Elite LCD with 6 x 120mm fans in push-pull intake configuration 2 x 32" Asus 2560x1440 displays, TrackIR5 w/pro clip, Thrustmaster Warthog stick and throttle, CH Fighterstick Pro and Pebble Beach Velocity pedals. 

Link to comment
Share on other sites

  • 10 months later...

Has any one had control issues today just tried to fly and with no input from the stick slowly moves forward. I can watch co-pilots arm moving slowly ahead. I checked controls re did them same ting . Looked at the USB game controls and the stick stays steady This is after an Oculus S firmware update if that has any bearing

[sIGPIC][/sIGPIC]

Window 10, i9-9900,2080TI, 32GB ram Puma Pro Flight Trainer, 2 x 1TB WB SSD NVMe HP Reverb

Link to comment
Share on other sites

huh, am I missing something here ? You've always needed to use back left stick with left rudder to take off in a hover ?

 

@RePhil, check that you don't have any other controllers connected which might do that

'Shadow'

 

Everybody gotta be offended and take it personally now-a-days

Link to comment
Share on other sites

huh, am I missing something here ? You've always needed to use back left stick with left rudder to take off in a hover ?

 

@RePhil, check that you don't have any other controllers connected which might do that

 

Don't know what the issue was but did a repair restart all is fine now thanks

[sIGPIC][/sIGPIC]

Window 10, i9-9900,2080TI, 32GB ram Puma Pro Flight Trainer, 2 x 1TB WB SSD NVMe HP Reverb

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...