Mnemonic Posted March 4, 2007 Share Posted March 4, 2007 (edited) So... here it is ;) http://lockonfiles.com/modules.php?name=Downloads&d_op=viewdownloaddetails&cid=54&lid=816&ttitle=LockOn_Virtual_Panel_v.1.2.1#dldetails Program visualise LockOn aircrafts dash-board on another monitor, TV, or on the other computer in your local network. Change list: -Much faster work with LockOn. -New user interface, with changeable dash-board. Now you can move and scale all gauges. VP saves all gauges parameters into LOVP.INI. -New gauges added: Horisontal situation indicator HSI (or, on Russian - PNP), RPM Indicator, Fuel gauge (simple), Temperature indicators (for left and right engines), added director-lines on Aviahorison. -Fixed some bugs. Some screens: Enjoy! :pilotfly: ----------------------EDITED----------------------- LOVP Script for LOFC 3.0 in DCS World v.1.2.1! LOVP v.1.3 now working with LOFC 2.0 Download LOVP v.1.3 here: http://3dvrm.com/bsvp/LOVP_v13p.zip Use this export script during setup: http://3dvrm.com/bsvp/LOFC3/Export.lua ----------------------EDITED----------------------- LOVP Script for LOFC 2.0! LOVP v.1.3 now working with LOFC 2.0 Download LOVP v.1.3 here: http://3dvrm.com/bsvp/LOVP_v13p.zip Use this export script during setup: http://3dvrm.com/bsvp/LOFC2/Export.lua After installing new script in LOFC2 you will have full support of LOVP, working like a charm. ----------------------EDITED----------------------- OLD LOVP FOR LOMAC 1.02 http://3dvrm.com/bsvp/vp_10_1.02.zip Note, this version is no longer supported in any way, use it as is. Edited January 1, 2013 by Mnemonic 3 Link to comment Share on other sites More sharing options...
pho3nix Posted March 4, 2007 Share Posted March 4, 2007 :0 ! please intergrate into touch buddy! Link to comment Share on other sites More sharing options...
Wild.Bill.Kelso Posted March 4, 2007 Share Posted March 4, 2007 TB has Transparent Tabs. So, you should be able to put this behind TB and make a Transparent Tab in TouchBuddy so you can see and click on this. Link to comment Share on other sites More sharing options...
Outlaw24 Posted March 4, 2007 Share Posted March 4, 2007 Nice Work Spoiler: MSI Z790 Carbon WIFI, i9 14900KF, 64GB DDR4, MSI RTX 4090, Thrustmaster Warthog Throttle, VKB Gunfighter Ultimate MCG Pro w/200mm Extension, Winwing Orion Rudder Pedals W/damper, UTC MK II Pro, Virpil TCS Plus Collective, Dell AW3418DW Gsync monitor, 970 Pro M2 1TB (for DCS), Playseat Air Force Seat, KW-980 Jetseat, Vaicom Pro, 3X TM Cougar with Lilliput 8" screens. Tek Creations panels and controllers. Link to comment Share on other sites More sharing options...
dodger42 Posted March 4, 2007 Share Posted March 4, 2007 Very cool Mnemonic!! . . . Lockon Advanced Realism with Touch-Buddy Link to comment Share on other sites More sharing options...
VMFA-Blaze Posted March 5, 2007 Share Posted March 5, 2007 Thats some very nice detail... Good work Bro.. ~S~ Blaze intel Cor i7-6700K ASUS ROG MAX VIII Extreme G.Skill TridentZ Series 32 GB Samsung 850 Pro 1TB SATA II ASUS GTX 1080/DIRECTX 12 Windows 10 PRO Thrustmaster Warthog Oculus Rift VR Link to comment Share on other sites More sharing options...
Fish Posted March 5, 2007 Share Posted March 5, 2007 Stuff looks really good. What is it used for? I can imagine they would be useful for remote training, to allow the instructor to view the trainees performance, if it can be used on the internet Fish's Flight Sim Videos [sIGPIC]I13700k, RTX4090, 64gb ram @ 3600, superUltraWide 5120x1440, 2560x1440, 1920x1080, Warthog, Tusba TQS, Reverb VR1000, Pico 4, Wifi6 router, 360/36 internet[/sIGPIC] Link to comment Share on other sites More sharing options...
Aeroscout Posted March 5, 2007 Share Posted March 5, 2007 I'd be nice if i had a second monitor. good work though. DCS Wishlist: 1) FIX THE DAMN RIVERS!!! 2) Spherical or cylindrical panorama view projection. 3) Enhanced input options (action upon button release, etc). 4) Aircraft flight parameter dump upon exit (stick posn, attitude, rates, accel, control volume, control-surface positions, SAS bias, etc). 5) ADS-33 maneuver courses as static objects. 6) Exposed API or exports of trim position and stick force for custom controllers. 7) Select auto multiple audio devices Link to comment Share on other sites More sharing options...
Grump Posted March 5, 2007 Share Posted March 5, 2007 This program sure does look good and would be of great help for my old eyes but unfortunately I am having the same problem as the last version. When the mission is loaded and the screen first comes up I see the change in Virtual Panel go from Disconnected to Connected. Once you push the 'S' key to start the mission the panel returns to the Disconnected in upper left of Virtual Panel. Sure wish someone could find a fix for this. It looks good and a wonderful idea but not working for me. Link to comment Share on other sites More sharing options...
Meyvn Posted March 5, 2007 Share Posted March 5, 2007 I hope one day this will be combined with TB, especially in Falcon4, those Big MFD and surrounding buttons, oh, and ICP Link to comment Share on other sites More sharing options...
Mnemonic Posted March 5, 2007 Author Share Posted March 5, 2007 oh... Grump - are you try it on every aircraft / pilot name / mission? Please try it, so it will be able easier for me to locate the bug. To other - thanks :) 1 Link to comment Share on other sites More sharing options...
Mnemonic Posted March 5, 2007 Author Share Posted March 5, 2007 About transparent tabs - at this time its unable for me - because it's eat proc. time much :(. But I'l try to find the way. About integrating with touch-buddy, I will think of it ;) Link to comment Share on other sites More sharing options...
walternowi Posted March 5, 2007 Share Posted March 5, 2007 Mnemonic, Nice tools. I ran into 2 issues: 1) when I ran the .exe, the screen looked like this I had to "right click" and then hit "restore gauges" to get the normal gauges. 2) same issue as Grump. When I first open a mission, the screen said "connected". Once I hit "S" to start the mission, the screen became "disconnected". It happened for a MiG-29 mission that I created and the Quickstart Su-27 mission. Thanks very much! Nowi Intel Xeon E5-1650 v2 ASUS Sabertooth X79 4 x 4GB Crucial Ballistix VLP PC3-12800 ASUS Cerberus GTX 1070 Ti 8 Gb Seasonic Platinum 860W Thrustmaster Cougar Uber II Nxt CH Products PT/TQ/MFP Slaw Pedals TrackIR 5 Link to comment Share on other sites More sharing options...
Mnemonic Posted March 5, 2007 Author Share Posted March 5, 2007 Hmm... strange... 1 - Are you shure you extract INI file at the same directory that .exe? 2 - Send me to private message your "Error.log". It in the "LockOn1.1\Temp\" directory... 3 - what windows do you have? Link to comment Share on other sites More sharing options...
Mnemonic Posted March 5, 2007 Author Share Posted March 5, 2007 And one more thing... You copy new VP export scripts to the LockOn? It must be from new version. Old scripts does not work with new version of program Link to comment Share on other sites More sharing options...
zorlac Posted March 5, 2007 Share Posted March 5, 2007 :0 ! please intergrate into touch buddy! I think thats something I should be doing... the last time I tried VP, it wouldnt run. I`ll grab the latest and see what I can do. 1 Link to comment Share on other sites More sharing options...
3Sqn_Sven Posted March 5, 2007 Share Posted March 5, 2007 Hey guys, I'm a bit new to the whole touch buddy concept, can someone in the know tell me if it would be possible, albeit expensive, to build a cockpit of TFT's and have the actual instruments and switches from the game displayed on them. Ie if you had 2 17" TFT's in front of you and a 15" on each side, or a combination etc. Or would Mnemonic's program be more suited to this? 3Sqn - Largest distributor of Flanker, Fulcrum and Frogfoot parts in the Black Sea Region Link to comment Share on other sites More sharing options...
zorlac Posted March 5, 2007 Share Posted March 5, 2007 both :) Give me a while to get this working and i`ll post some screenies Link to comment Share on other sites More sharing options...
Mnemonic Posted March 5, 2007 Author Share Posted March 5, 2007 Hi Zorlac, it would be nice if you tested it. If will be any problems, I'l try to solve it... Link to comment Share on other sites More sharing options...
zorlac Posted March 5, 2007 Share Posted March 5, 2007 OK, most of you know how TouchBuddy works. You have multiple tabs that display groups of buttons and/or modules, and each button can send user defined macro lists to the currently active window. Now, with v1.3, I added a module that automatically creates a transparent area in selected tabs to allow other applications to be "seen" through it. The following is the same profile as the above picture, I just selected another tab. The click-through module also allows the user to define where they want the named window moved to (relative to the TB window), and also tries to resize it as required. It also forces the "NOACTIVATE" flag into the named window state so you cannot accidently click on the displayed window and give it focus (which will minimize any full screen game window). As the module can be placed on a layer, you can then define buttons to be on a higher layer, which will then cover parts of the transparent hole in the TB window. The second image shows the TB window with buttons placed on a higher layer, covering the transreparent area that should display the whole VP window underneath. (BTW, when TB exits it will move the named window back to where it was, and attempts to return it to its original height/width). NOTE: This has been tested only on my laptop, I`ll have to find some time to get the LUA stuff tested on my home gaming rig. Link to comment Share on other sites More sharing options...
zorlac Posted March 5, 2007 Share Posted March 5, 2007 Oh, and this was what the config looks like in TBTk. Link to comment Share on other sites More sharing options...
Mnemonic Posted March 5, 2007 Author Share Posted March 5, 2007 So, it works with LockOn? Link to comment Share on other sites More sharing options...
zorlac Posted March 5, 2007 Share Posted March 5, 2007 let me test it on my game PC at home when I can ... Link to comment Share on other sites More sharing options...
Grump Posted March 5, 2007 Share Posted March 5, 2007 All aircraft all pilots the same a no go here. Link to comment Share on other sites More sharing options...
Doug Posted March 5, 2007 Share Posted March 5, 2007 Thanks Mnemonic :thumbup: LOTATC .NET // LOVICA .NET // 3rd Wing Link to comment Share on other sites More sharing options...
Recommended Posts