Eldur Posted May 31, 2020 Share Posted May 31, 2020 Worth a try, didn't think about that... Link to comment Share on other sites More sharing options...
Eagle_01 Posted June 1, 2020 Share Posted June 1, 2020 That happened to me several times. It happens at random. I just sit there and wait.. And eventually it loads. The longest I had to wait was about 3-5mins I think. It was when I spawned an Mi-8 on the Supercarrier. I literally looked around, went to F2, then back in the cockpit. And just sat there waiting. Eventually it loaded. Intel Core i7 7700, 16GB DDR4 RAM, Intel 660P PCIe NVMe, Zotac 2070 Super Amp, Oculus Rift S A-10C, FA-18C, F-14B, FC3, F-5E, F-86, AV8B, M-2000, Combined Arms, AJS37, F-16C, C-101, MiG-15Bis, MiG-19P, MiG-21Bis, L-39, P-51D, Spitfire LFMkIX, Bf-109, Fw-190 Dora, Fw-190 Anton, P-47D, I-16, SA342, Mi-8MTV2, UH-1H, Ka-50 Link to comment Share on other sites More sharing options...
Ruebban Posted June 1, 2020 Share Posted June 1, 2020 What's the latest file that works with 2.5.6 ic pass and have clear water? Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 1, 2020 Share Posted June 1, 2020 check my sig SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
ESA_v1T1 Posted June 1, 2020 Share Posted June 1, 2020 check my sig, on my 2.5.6 settings, the clear water version is attached there So, the only way to have clear water is kipping default water.fx, GBuffer.hlsl and Decoder.hlsl??, there's no way modifying only water.fx?? Im looking for use the full mod and have clear water in low, is this possible or not? Thanks! :thumbup: Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 2, 2020 Share Posted June 2, 2020 (edited) Not to my knowledge removing water.fx is the only way to get clear water. Aka this https://forums.eagle.ru/attachment.php?attachmentid=237216&d=1590479569 You have to remove much more to get ic pass. That said i will have a look and see. SO i was able to add shadows back in without any ill effects, as soon as you add in either GBBuffer or decoder, you get far too transparent water. I have updated the file to allow shadows as well https://forums.eagle.ru/attachment.php?attachmentid=238140&d=1591099016 Edited June 2, 2020 by speed-of-heat SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
_schepper_ Posted June 2, 2020 Share Posted June 2, 2020 hey thanks for the mod, i just trying the mod out and i have in the f18 a strange water (glitch) (reflect) in the canopy glass... if i keep my head still the water looks oke, but if i move my head, part of the water is moving to.. am i missing somthing? i have search this forum a bit but... its a lot :) greets Link to comment Share on other sites More sharing options...
Hammer1-1 Posted June 2, 2020 Share Posted June 2, 2020 dont know how you missed it, its been mentioned several times in the last 10 pages. Run a repair, delete the water.fx file in the mod folder you downloaded, and reinstall the mod. Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE| Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VKB Gunfighter Mk3 MCE Ultimate + STECS/ Virpil MongoosT50+ MongoosT50CM |Virpil TCS+ AH64D grip + custom AH64D TEDAC | HP Reverb G2 | Windows 11 Pro | |Samsung Odyssey G9 | Next Level Racing Flight Seat Pro My wallpaper and skins Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 2, 2020 Share Posted June 2, 2020 if you just delete water.fx on the current version of the mod you get "too" transparent water ... especially visible in rivers and shallows, where you can see the trees... you also have to get rid of GBuffer.hlsl and Decoder.hlsl as well SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Hammer1-1 Posted June 2, 2020 Share Posted June 2, 2020 that i didnt know... Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE| Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VKB Gunfighter Mk3 MCE Ultimate + STECS/ Virpil MongoosT50+ MongoosT50CM |Virpil TCS+ AH64D grip + custom AH64D TEDAC | HP Reverb G2 | Windows 11 Pro | |Samsung Odyssey G9 | Next Level Racing Flight Seat Pro My wallpaper and skins Link to comment Share on other sites More sharing options...
Gunja Posted June 3, 2020 Share Posted June 3, 2020 Hi all. Using Rift CV1 i see some clouds only in my left eye. Also when i turn on HMCS on F-16, that HUD is only visible in just one eye too. I have shaders mod for 2.5.6.49314 and my DCS is also still on that version. Also, if i update to 2.5.6.49798 do i need to reinstall shaders mod? Cheers. Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 3, 2020 Share Posted June 3, 2020 you dont have to but i would , re the HMCS thing check you have set it to draw in both eyes.... SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Gunja Posted June 3, 2020 Share Posted June 3, 2020 Thank You. Link to comment Share on other sites More sharing options...
Dave317 Posted June 3, 2020 Share Posted June 3, 2020 (edited) I'm getting this error with todays update. I have deleted the fxo amd meta folders. Edited June 3, 2020 by Dave317 Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 3, 2020 Share Posted June 3, 2020 what version of the mod were you on Dave? SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Pack64 Posted June 3, 2020 Share Posted June 3, 2020 Hi, I´m getting the same error as Dave, I´ve just updated to version DCS 2.5.6.50321 Open Beta Thanks Link to comment Share on other sites More sharing options...
Rykane Posted June 3, 2020 Share Posted June 3, 2020 (edited) Getting this error as well, I'm on the latest version. I also uninstalled the mod, and deleted everything in my FXO2 and metashaders folder yet it's still doing the error. Edited June 3, 2020 by Rykane Link to comment Share on other sites More sharing options...
Dave317 Posted June 3, 2020 Share Posted June 3, 2020 I'm using the latest version. It was running perfectly before I updated to the latest beta. Link to comment Share on other sites More sharing options...
TomcatFly Posted June 3, 2020 Share Posted June 3, 2020 Same error, just updated to latest beta. Link to comment Share on other sites More sharing options...
LtDanTailor Posted June 3, 2020 Share Posted June 3, 2020 I'm getting this error with todays update. I have deleted the fxo amd meta folders. Exactly the same error here :cry: Win10 Pro, Intel i9 9700k @5GHz, GeForce RTX 2080 TI, 32GB G.Skill Ripjaw DDR4 @3200MHz RAM, MSI z390 Gaming Plus, HP Reverb Pro, TM Warthog, Virpil WarBRD Base, Samsung SSD 850 EVO 500GB (for DCS), Samsung SSD 850 EVO 250GB (for Win10), Philips PHL 274E Link to comment Share on other sites More sharing options...
razalom Posted June 3, 2020 Share Posted June 3, 2020 Well looks like we all have to wait for an update Link to comment Share on other sites More sharing options...
Rykane Posted June 3, 2020 Share Posted June 3, 2020 (edited) Anyone with the errors, Try to navigate to both of these paths below and delete anything in them. DCS World\Mods\terrains\(terrain)\misc\metacache\dcs DCS World\Mods\terrains\(terrain)\misc\shadercache I managed to load up an SP mission with the mod disabled and deleting the files within those folders above. I'm going to try to reinstall the mod now and check if it works. *UPDATE* Just tried to reinstall the mod and I get the error again. Looks like we'll need to wait for an updated version. Edited June 3, 2020 by Rykane Link to comment Share on other sites More sharing options...
sigfan86 Posted June 3, 2020 Share Posted June 3, 2020 Anyone with the errors, Try to navigate to both of these paths below and delete anything in them. DCS World\Mods\terrains\(terrain)\misc\metacache\dcs DCS World\Mods\terrains\(terrain)\misc\shadercache I managed to load up an SP mission with the mod disabled and deleting the files within those folders above. I'm going to try to reinstall the mod now and check if it works. *UPDATE* Just tried to reinstall the mod and I get the error again. Looks like we'll need to wait for an updated version. No good, same error System: Ryzen 5900x, G.Skill 3600 32GB, MSI 4090 suprim liquid X, samsung odyssey+ headset Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 3, 2020 Share Posted June 3, 2020 yep looks like it is borked! SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
speed-of-heat Posted June 3, 2020 Share Posted June 3, 2020 tactically i found reducing my PD by 10% has given me enough of a perf boost to be able to run without it, obviously that's quite a big hit graphically, so you will need to work out what irritates you better, until the mod gets updated. SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Recommended Posts