Deadman Posted February 23, 2012 Author Share Posted February 23, 2012 Me naw just nutty I started collecting parts when i was still flying Lockon the change from an A-10A to the C set me back a bit but well I am getting there slowly parts are very scarce. Well here are the pictures the grip is from an F-16 it still has the pinky paddle on it i will remove it some time The threaded base of the grip showing the male Amphenolconnector and the mating connector area I had to cut the two side key ways in to the grip to mate the stick to it This is the mating area of the stick it has two keys sticking out of the face and the compression collar Here i have inserted a cut down housing from the old connector the was for fewer larger female pins in the old Amphenol connector this will creat a base for the new connector to be glued to. to keep it stable in the grip the new center prsion of the new Amphenolconnector with all but one of the keys removed Here the connector has been placed into the grip the female pins have not been soldered to the 28 AWG wire yet after that pins will be installed in to the connector labeled and sealed up. The grip next to the stick and some picture of them temporally connected https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Ells228 Posted February 23, 2012 Share Posted February 23, 2012 Awesome work there :) Link to comment Share on other sites More sharing options...
Deadman Posted February 23, 2012 Author Share Posted February 23, 2012 Thanks but there is more to do on that than i care to think about right now I sill have not made a choice on IO boards. https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
avlolga Posted February 23, 2012 Share Posted February 23, 2012 :thumbup::thumbup::thumbup: you are having fun !!! Link to comment Share on other sites More sharing options...
Deadman Posted February 24, 2012 Author Share Posted February 24, 2012 Not exactly i had yesterday off. Was it an order supplies day, no work on the pit day, no clean the garage naw . Build an 8 ft scratch pole for the wife's cat oh ya that is what i am talking about right there buddy :thumbup: ah well ya gat do some things ya don't want to in life https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
MemphisBelle Posted February 24, 2012 Share Posted February 24, 2012 ah well ya gat do some things ya don't want to in life That´s whats reallife takes with it :D where did you got these parts from, that´s awesome. I sniffing around through Ebay but rarely found such things. may be Ebay is not the best source, isn´t it? DCS-Tutorial-Collection BlackSharkDen - Helicopter only Specs:: ASrock Z790 Pro RS; Intel i5-13600K @5,1Ghz; 64GB DDR5 RAM; RTX 3080 @10GB; Corsair RMX Serie 750; 2x SSD 850 EVO 1x860 EVO 500GB 1x nvme M.2 970 EVO 1TB; 1x nvme M.2 980 Pro 2TB+ 3 TB HDD Hardware: Oculus Rift S; HOTAS Warthog; Saitek Rudder Pedals, K-51 Collective Link to comment Share on other sites More sharing options...
Deadman Posted February 24, 2012 Author Share Posted February 24, 2012 (edited) Where to find the parts well eBay and several other places. I have posted numerous eBay listings for parts in that thread, I have also offer several of my spare parts up for sale and normally people are shocked at the price that are well below what it would cost you to make the panel or part. As most seller in the states i don't sell out side of the U.S. due to current export restrictions. I would suggest first you do your research and know exactly what your looking for as for parts and control (boxes) Heads. Some are shares with the different versions of the F-16. This does drive the price up but some time. I have out bid F-16 builders on some items and been out bid on others. I am still looking for a few things but that is a part of the journey for me That´s whats reallife takes with it :D where did you got these parts from, that´s awesome. I sniffing around through Ebay but rarely found such things. may be Ebay is not the best source, isn´t it? Edited February 24, 2012 by Deadman 1 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted February 27, 2012 Author Share Posted February 27, 2012 Environmental Panel OXY TEST IND MS25089-3G WIND SHEILD DEFIG/DEICE MS27718-23-1, 11TW1 3 PITOT HEAT NSN 5930-01-008-6930 PART # A3-1127 TEMP PRESS NORM MS27753-38, 12TW1-10 WINDSHIELD RAIN REMOVE MS27753-39, 12TW1-50 BLEED AIR MS24658-23D, 1TL1-3D MAIN AIR SUPPLY MS24658-23F, 1TL1-3F OPER AUTO MS25128-1, NSN 5930-00-777-5730 CANOPY DEFOG Clarostat 53C1 SW 10k potentiometer FLOW LEVEL Clarostat 53C1 SW 10k potentiometer TEMP LEVEL Clarostat 53C1 SW 10k potentiometer https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
avlolga Posted February 27, 2012 Share Posted February 27, 2012 (edited) ah well ya gat do some things ya don't want to in life oohhh deadman .... my man ..... you don't realey want to hear me poor story !!! i will just give you a sort preview: 3 Cats, one Dog, one 3 years old kid, and two baby girls in the way:doh:(if all will go without any complications). so yep life is rush, but it can always be worse !!! to bad there is only 24H a day, it will be grate if someone can arrange some 2-3 Hours in addition. Edited February 27, 2012 by avlolga Link to comment Share on other sites More sharing options...
Duckling Posted February 27, 2012 Share Posted February 27, 2012 (edited) A "HogViper" stick or maybe the other way around, hehe.. Great work and result DM ! Whats your plan for the base attachment of the stick, remove the original "fork" and building an adapter for a TM Hog base or make a home made base ? (edit.. or knowing you, you might already have the true "tub" ready... ;-) Edited February 27, 2012 by Duckling - - - - Link to comment Share on other sites More sharing options...
Deadman Posted February 27, 2012 Author Share Posted February 27, 2012 (edited) HI Gus I have a real throttle and real stick and grip. There is no need for the TM Warthog i will make a base to attach the stick as it is at the correct height in the floor of the cockpit I am not sure what IO solution to use yet PHCC ,Open cockpit or some thing else. no the tub has not been started yet to busy with other things. Edited March 2, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted March 2, 2012 Author Share Posted March 2, 2012 Right Counsel switches review Electrical Power Panel APU GEN MS24658-23F INVERTER STAND BY MS27753-39 ON ON (ON) TEST IS MOM EMER FLOOD MS24658-23G AC GEN 2 EACH MS27718-23-1 BATTERY PWR MS27718-23-1 CMSP Panel JTSN switch MS21026C231 BRT small 10 K potentiometer Systems switches 4x MS27754-5M Mode rotary ? Avionics Auxiliary Panel This one I don't have a panel CDU Power Switch MS21026-E231 8855K8 EGI Power Switch MS21026-E231 8855K8 Page Select Dial 45° indexing angle, 3 or 8 position rotary switch MIL-S-3786 [JANCO Series A, AA, or AC 45° Miniature switch] Or a {COLE 1800, 3900, or 3600 Series Switch, (Example F3645-103)} Steer Point Dial 45° indexing angle, 3 or 8 position rotary switch MIL-S-3786 [JANCO Series A, AA, or AC 45° Miniature switch] Or a {COLE 1800, 3900, or 3600 Series Switch, (Example F3645-103)} Steer Toggle Switch Honeywell Micro Switch 1TL48-7 Environmental Panel OXY TEST IND MS25089-3G WIND SHEILD DEFIG/DEICE MS27718-23-1, 11TW1 3 PITOT HEAT NSN 5930-01-008-6930 PART # A3-1127 TEMP PRESS NORM MS27753-38, 12TW1-10 WINDSHIELD RAIN REMOVE MS27753-39, 12TW1-50 BLEED AIR MS24658-23D, 1TL1-3D MAIN AIR SUPPLY MS24658-23F, 1TL1-3F OPER AUTO MS25128-1, NSN 5930-00-777-5730 CANOPY DEFOG Clarostat 53C1 SW 10k potentiometer FLOW LEVEL Clarostat 53C1 SW 10k potentiometer TEMP LEVEL Clarostat 53C1 SW 10k potentiometer Ext Intr Lights Panel POSITION FLASH MS27753-38, 12TW1-10 FORMATION Clarostat P009 10 K potentiometer wit switch SPST On Offhttp://www.westfloridacomponents.com...ST+ON+OFF.html ANTI-COLLISION 25ET61-T MAGNETICALLY HELD ENG INST Clarostat P009 10 K potentiometer NOSE ILLUM Clarostat P009 10 K potentiometer AUX INST Clarostat P009 10 K potentiometer SIGNAL LTS MS27753-40, 12TW1-70 FLT INST Clarostat P009 10 K potentiometer ACCEL& COMP MS27723-1 12TW1-3 FLOOD Clarostat P009 10 K potentiometer CONSOLE Clarostat P009 10 K potentiometer :book: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Mike Powell Posted March 3, 2012 Share Posted March 3, 2012 Thanks, this is helpful. 1 Mike Powell www.mikesflightdeck.com www.mikesflightdeckbooks.com Link to comment Share on other sites More sharing options...
Deadman Posted March 3, 2012 Author Share Posted March 3, 2012 Your welcome Mike:thumbup: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
moken Posted March 3, 2012 Share Posted March 3, 2012 (edited) Sorry, I am not sure your mean the follow item 1) Environmental Panel WINDSHIELD RAIN REMOVE MS27753-39, 12TW1-50 is on(mom)-on-on http://sensing.honeywell.com/product%20page?pr_id=33159 but i saw the game is on-on-on , 12TW1-10 is correct? 2) CMSP Panel Systems switches 4x MS27754-5M connot find , I just find MS27754-39M HW 12TW1-50M on(mom)-on-on http://sensing.honeywell.com/product%20page?pr_id=33182 and MS27754-35M HW 12TW1-56M http://sensing.honeywell.com/product%20page?pr_id=33198 for on(mom)-on-on ,but i don't know the different between from 12TW1-50M and 12TW1-56M, what is defferent? Which is correct? 3) The Antenna Select panel IFF ANT MS24659-21E is on-off-on , but the game is use on-on-on input Whether i can use MS27408-4A HW 2TL1-10A on-on-on maintained? 4) What different from non-maintained and maintained switch? 5) UHF UPPER MS27718-23 can not find, just find MS27718-23-1 HW 11TW1-3 on-on, but hte game is on-on-on input, which is correct ? 6) Environmental Panel PITOT HEAT NSN 5930-01-008-6930 PART # A3-1127 can not find, where can i buy? 7) Environmental Panel BLEED AIR SWITCH is use 1TL1-3D on-on Lock out of center position , why MAIN AIR SUPPLY SWITCH is use 1TL1-3F on-on Lock in extreme position? 8 ) I did not touch real A-10C switch, How can i know which side is Lock for each switch? How can i know use which switch such as Environmental Panel - BLEED AIR SWITCH, MAIN AIR SUPPLY SWITCH between from 1TL1-3D on-on Lock out of center position and 1TL1-3F on-on Lock in extreme position? Edited March 3, 2012 by moken Link to comment Share on other sites More sharing options...
Deadman Posted March 3, 2012 Author Share Posted March 3, 2012 (edited) I have tried to sort through your post and answer your questions. Witch have been difficult to understand you may wish to try and make your questions a bit clearer. This is the best I can do DM Sorry, I am not sure your mean the follow item 1) Environmental Panel WINDSHIELD RAIN REMOVE MS27753-39, 12TW1-50 is on(mom)-on-on http://sensing.honeywell.com/product%20page?pr_id=33159 but i saw the game is on-on-on , 12TW1-10 is correct? On My Panel It is what I posted 2) CMSP Panel Systems switches 4x MS27754-5M cannot find , I just find MS27754-39M HW 12TW1-50M on(mom)-on-on http://sensing.honeywell.com/product%20page?pr_id=33182 The switch I have Is MS27754-5M ,12TW1-50M this is on its side. I have confirmed this is the correct switches for the System switches and MS27754-35M HW 12TW1-56M http://sensing.honeywell.com/product%20page?pr_id=33198 for on(mom)-on-on ,but i don't know the different between from 12TW1-50M and 12TW1-56M, what is difference? I have no Idea contact Honeywell or look it up on the net Which is correct? See above 3) The Antenna Select panel IFF ANT MS24659-21E is on-off-on , but the game is use on-on-on input What is your Question? Whether i can use MS27408-4A HW 2TL1-10A on-on-on maintained? No Idea i don't know what system for controlling your switches or your IO system. I all so don't know what you want to use it for 4) What different from non-maintained and maintained switch? non-maintained is a momentary switch you let go and it returns to it center position. IE (on)-off (on) the () indicate momentary positions maintained you move it from on position to the next it stays on-off- on indicate maintained positions but i may have misunderstood your question 5) UHF UPPER MS27718-23 can not find, just find MS27718-23-1 HW 11TW1-3 on-on, but the game is on-on-on input, which is correct ? 11TW1-3 6) Environmental Panel PITOT HEAT NSN 5930-01-008-6930 PART # A3-1127 can not find, where can i buy? I have no Idea 7) Environmental Panel BLEED AIR SWITCH is use 1TL1-3D on-on Lock out of center position , why it is an on off switch MAIN AIR SUPPLY SWITCH is use 1TL1-3F on-on Lock in extreme position? What is your Question? 8 ) I did not touch real A-10C switch, How can i know which side is Lock for each switch? How can i know use which switch such as Environmental Panel - BLEED AIR SWITCH, MAIN AIR SUPPLY SWITCH between from 1TL1-3D on-on Lock out of center position and 1TL1-3F on-on Lock in extreme position? I don't understand what your question is Edited March 5, 2012 by Deadman clarity 1 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted March 6, 2012 Author Share Posted March 6, 2012 so where were we? https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
moken Posted March 6, 2012 Share Posted March 6, 2012 Thank you deadman, now I know your purpose for reference, I will use your reference to build my cockpit Link to comment Share on other sites More sharing options...
Deadman Posted March 6, 2012 Author Share Posted March 6, 2012 your welcome good luck on your build https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted March 7, 2012 Author Share Posted March 7, 2012 The Intercom panel switch supplier possibly INT - HM are CLAROSTAT in out switched potentiometers VA388-10K BJ-3 http://translate.google.com/translate?hl=en&sl=zh-CN&tl=en&u=http%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fid%3D10954164244%26 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
moken Posted March 8, 2012 Share Posted March 8, 2012 hey Thanks , I have ac in this website , if anybody want it , I can help , I also can Chinese Link to comment Share on other sites More sharing options...
Deadman Posted March 9, 2012 Author Share Posted March 9, 2012 :cry: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted March 11, 2012 Author Share Posted March 11, 2012 Well guys I had a lot planed for this week end with casting, and i wanted to get the lead wires soldered in to the connector for the grip but do to some personal problems things are on hold for a few days. I will update you when i get back on track thanks https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted March 18, 2012 Author Share Posted March 18, 2012 Hui guys does any one have access to the 3Gofly.com form I am just wondering who is re posting my pictures there with out talking to me thanks https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
airdog Posted March 18, 2012 Share Posted March 18, 2012 BWAAAA....it's all in Chinese...good luck trying to get your pictures off of a site that is in a country full of knock-off...hacks and downright intellectual property thieves. Good luck with the pictures ;) Airdog | Asus ROG Strix Z370-E Mobo | i7 8700K @ 4.7 | 32 GB DDR4@3200mhz | Gigabyte 2080Ti OC 11GB| Samsung M.2 960 Evo 250Gb and 500Gb | Win10 Pro | Hotas Warthog #02743 | Track IR 5 | Toshiba 47" 120hz LED | Acer 23" Touchscreen | HELIOS |Oculus Rift-S| http://www.blackknightssquadron.com/ Link to comment Share on other sites More sharing options...
Recommended Posts