gulredrel Posted January 25, 2019 Share Posted January 25, 2019 (edited) Hello, don't know if it's a bug or a problem with my mission setup. Can anybody please try the following? Mission is attached. I want to use a Mobile commandpost truck to function as a mobile NDB. Frequency set to 0.376MHz (equals 376 kHz) and playing file in loop as transmit message is configured as a triggered action. Staying on the ground, connecting ground power, turning on ARK-5 and dialing the frequency I can hear the file setup in mission editor. I also clearly see signal strength on the ARK-5. As soon as I change radio to wavenumber 168 and request startup clearance, the command post signal is lost. No more sound, no signal strength. Regards Jens PS: This was in 2.5.3 stable version. Just noticed, that stable branch is updated. Will try again in 2.5.4. Anyway, your input is appreciated. PPS: Rechecked in 2.5.4, behaviour is the same.MiG-15_Gudauta.miz Edited January 25, 2019 by gulredrel Link to comment Share on other sites More sharing options...
Recommended Posts