Codawa Posted May 24, 2018 Share Posted May 24, 2018 (edited) If I activate SSAA ingame DCS aborts with the following message: What could that be? 2018-05-24 22:01:27.992 ERROR DX11BACKEND: Can't find precompiled shader deferred/blurcompute.fx:DIRECTX11=true;FILTER_KERNEL0= 0.00333, 0.02382, 0.09719, 0.22598, 0.29937, 0.22598, 0.09719,;FILTER_KERNEL1= 0.02382, 0.00333;FILTER_KERNEL2;FILTER_KERNEL3;FILTER_KERNEL4;FILTER_SIZE=9;PIXELS_PER_THREAD_X=3;PIXELS_PER_THREAD_Y=1;SIZE_X=736;SIZE_Y=405;USE_DCS_DEFERRED=1;. 2018-05-24 22:01:27.992 INFO DX11BACKEND: Compile shader: deferred/blurcompute.fx:DIRECTX11=true;FILTER_KERNEL0= 0.00333, 0.02382, 0.09719, 0.22598, 0.29937, 0.22598, 0.09719,;FILTER_KERNEL1= 0.02382, 0.00333;FILTER_KERNEL2;FILTER_KERNEL3;FILTER_KERNEL4;FILTER_SIZE=9;PIXELS_PER_THREAD_X=3;PIXELS_PER_THREAD_Y=1;SIZE_X=736;SIZE_Y=405;USE_DCS_DEFERRED=1; 2018-05-24 22:01:28.555 ERROR DX11BACKEND: Shader "bazar/shaders/deferred/blurCompute.fx" failed to compile. Reason: warning X4717: Effects deprecated for D3DCompiler_47 error X4586: The total amount of group shared memory (35328 bytes) exceeds the cs_5_0 limit of 32768 bytes D:\DCS World OpenBeta\bazar\shaders\deferred\blurCompute.fx(75,20-60): There was an error compiling expression Edited May 24, 2018 by Codawa Link to comment Share on other sites More sharing options...
caponi Posted May 26, 2018 Share Posted May 26, 2018 i have the same problem ! i use 3 monitors a 1920 * 1080 ... the resolution is too big. if i use a single monitor in full HD then it works ... not usable for multi monitor setups ... too much ... Link to comment Share on other sites More sharing options...
SkateZilla Posted May 26, 2018 Share Posted May 26, 2018 (edited) SSAA Shouldnt be used above 1080P SSAA = Super Sampling As the SSAA Resolution is above the DirectX 11 Limit Per display (8000 px?), Not to even mention the GPU's Capability. ie 4K: SSAA = 1.5x = 5760x3240 SSAA = 2.0x = 7860x4320 ie 1080p Surround/Eyefinity: SSAA = 1.5x = 8640x1620 SSAA = 2.0x = 11520x2160 5760x1080 x 1.5 = 8640x1620 Edited May 26, 2018 by SkateZilla Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
Wolf8312 Posted May 26, 2018 Share Posted May 26, 2018 Does it work with VR? Seems like its all zoomed in though I dont know what SSAA is or if its supposed to work like that! ------------ 3080Ti, i5- 13600k 32GB VIVE index, VKB peddals, HOTAS VPC MONGOOSE, WARTHOG throttle, BKicker, Link to comment Share on other sites More sharing options...
caponi Posted May 26, 2018 Share Posted May 26, 2018 hi, i used an old blurCompute.fx from 2.5.0 OB and it works with 3 monitors ... is it possible to rework that feature ? too much ... Link to comment Share on other sites More sharing options...
Zola254 Posted August 4, 2018 Share Posted August 4, 2018 Hi I have the same problem but with the twist that the game now produces this error during boot up of DCS World, so I cannot change the settings and turn off SSAA as I do not even get to the start up menu. Is there a way to change the settings without actually booting up the game, config file etc? Any help appreciated Thanks Link to comment Share on other sites More sharing options...
Eclipse Posted September 4, 2018 Share Posted September 4, 2018 Hi I have the same problem but with the twist that the game now produces this error during boot up of DCS World, so I cannot change the settings and turn off SSAA as I do not even get to the start up menu. Is there a way to change the settings without actually booting up the game, config file etc? Any help appreciated Thanks The same thing happened to me, I wanted to see what it would look like all maxed out, not that my PC would be able to play it that way! Here is how to fix it: Navigate to C:\Users\YOURUSERNAME\Saved Games\DCS\Config\options.lua Open the file with administrator privileges in the text editor of your choice (I use Notepad++) Find the line that contains SSAA (line 48 in my options.lua file) Change ["SSAA"] = 2, to ["SSAA"] = 0, Save the file Happy flying! i7-9700k overclocked to 4.9ghz, RTX 2070 Super, 32GB RAM, M.2 NVMe drive, HP Reverb G2 version 2, CH Fighterstick, Pro Throttle, Pro Pedals, and a Logitech Throttle Quadrant Link to comment Share on other sites More sharing options...
specialksl Posted November 16, 2018 Share Posted November 16, 2018 The same thing happened to me, I wanted to see what it would look like all maxed out, not that my PC would be able to play it that way! Here is how to fix it: Navigate to C:\Users\YOURUSERNAME\Saved Games\DCS\Config\options.lua Open the file with administrator privileges in the text editor of your choice (I use Notepad++) Find the line that contains SSAA (line 48 in my options.lua file) Change ["SSAA"] = 2, to ["SSAA"] = 0, Save the file Happy flying! I tried this and it didn't work. Any other suggestions? Link to comment Share on other sites More sharing options...
thomasp335 Posted December 16, 2018 Share Posted December 16, 2018 Hi I have the same problem but with the twist that the game now produces this error during boot up of DCS World, so I cannot change the settings and turn off SSAA as I do not even get to the start up menu. Is there a way to change the settings without actually booting up the game, config file etc? Any help appreciated Thanks I am now having the same problem. Were you able to find a solution? Tom Link to comment Share on other sites More sharing options...
aarenas52 Posted December 22, 2018 Share Posted December 22, 2018 A fix that worked for me. So a fix that worked for me: Navigate to C:\Users\YOURUSERNAME\Saved Games\DCS\Config\options.lua Open the file with administrator privileges in the text editor of your choice (I use Notepad++) Find the line that contains Width (line 83 if you are using notepad ++, this is the with of your screen.) Change what ever number that may be to the screen width of the screen you own. So if your main screen is 1920x1080p, set that number to 1920 Save the file this fixed it for me hope it helps others! Link to comment Share on other sites More sharing options...
EvilBert VR Posted January 28, 2019 Share Posted January 28, 2019 Hi all, hope this is the right place to post. Yesterday I received the same Error message when trying to start DCS from the Pimax-Tool. I have succesfully imported DCS into the Pimax menu but no success in starting DCS from there. NOT VIA STEAM-VR!! The message keeps showing. The proposed solutions didn't work. Any ideas? THX, EB My System: Full Scale Huey SimPit -Pit Computer: i7-12700K | Gigabyte Z690 AORUS Pro | 64GB DDR5 RAM | Nvidia RTX3090FE | Kingston KC3000 NVme - All day use: i7-4790K | 32GB DDR4 RAM | ASRock Z97 Killer | GeForce RTX 2080 Ti AMP! | Oculus Rift | Pimax8KX | Sensoryx VRFree Gloves | X-TAL VR Link to comment Share on other sites More sharing options...
PhilTheBeat Posted April 17, 2019 Share Posted April 17, 2019 Hello, same problem here, even changing the values in line 51 or 83 in the options.lua I run a 5760x1080 I7 4770K / 1080 TI / 16GB RAM / VR Q2 / 3X IIYAMA 27 / T.16000M FCS TWCS / TRACK IR PRO A-10C II / F/A18 C / F-14 / F16-C / M-2000C / F-86F Sabre / C-101 / SPITFIRE LF / P-51D / FW 190 D-9 / FW 190 A-B / Bf 109 K-4 CHRISTEN EAGLE II / YAK-52 / UH-1H Huey / SA 342 CHANNEL MAP / NEVADA / NORMANDY / PERSIAN / SYRIA / SUPERCARRIER / TAKE OFF FRANCE.FR Link to comment Share on other sites More sharing options...
ctguy1955 Posted June 18, 2019 Share Posted June 18, 2019 (edited) 2.5.5 error and cant get Open beta to work 2016, and this is happening to me in June 2019. Version 2.5.5 and they did come out with a small update. Release Version works fine but not the update. I have used a brand new 500 gig hd and installed open beta and I get the same error. I have tried torrent and HTTP and nothing helps and I just bought the Dora A8 and can only use it in the Open Beta. I have a ticket with ED and they want Me to send logs, which I did. Edited June 18, 2019 by ctguy1955 Link to comment Share on other sites More sharing options...
PhilTheBeat Posted January 26, 2020 Share Posted January 26, 2020 The same thing happened to me, I wanted to see what it would look like all maxed out, not that my PC would be able to play it that way! Here is how to fix it: Navigate to C:\Users\YOURUSERNAME\Saved Games\DCS\Config\options.lua Open the file with administrator privileges in the text editor of your choice (I use Notepad++) Find the line that contains SSAA (line 48 in my options.lua file) Change ["SSAA"] = 2, to ["SSAA"] = 0, Save the file Happy flying! Thanks !! Fixed... I7 4770K / 1080 TI / 16GB RAM / VR Q2 / 3X IIYAMA 27 / T.16000M FCS TWCS / TRACK IR PRO A-10C II / F/A18 C / F-14 / F16-C / M-2000C / F-86F Sabre / C-101 / SPITFIRE LF / P-51D / FW 190 D-9 / FW 190 A-B / Bf 109 K-4 CHRISTEN EAGLE II / YAK-52 / UH-1H Huey / SA 342 CHANNEL MAP / NEVADA / NORMANDY / PERSIAN / SYRIA / SUPERCARRIER / TAKE OFF FRANCE.FR Link to comment Share on other sites More sharing options...
Maddogs Posted April 20, 2020 Share Posted April 20, 2020 Delete the options.lua file and restart worked for me guys. BASE SETUP: CPU: i7 5820K 3.3Ghz MOB: ASUS RAM: 64GB (4x16GB) PC4-25600 (3200MHz) DDR4 GPU: 3 x NVIDIA GeForce GTX 1080 Ti OS: Windows 10 Enterprise on SSD (SATA) Drivers: Nvidia Thrustmaster Hotas :joystick: Link to comment Share on other sites More sharing options...
Recommended Posts