Kneeboard Builder (windows app) - Page 54

Chic · 08-30-2016, 02:15 PM

This is a good piece of work. I've not experienced issues some others have had and hope you stay with it. Would donate if that is an option.

Sorry if this has been covered but how can we get Gazelle L type as an option?

AlaskanGrizzly · 09-05-2016, 07:25 PM

Version 1.6.7.9 is now available.

Changelog

- Added custom kneeboard support for SA342L

Cibit · 09-05-2016, 08:44 PM

Thank you

Chic · 09-06-2016, 12:31 AM

Quote:

Originally Posted by AlaskanGrizzly

Version 1.6.7.9 is now available.

Changelog

- Added custom kneeboard support for SA342L

Link doesn't appear to be updated.
Thank you

AlaskanGrizzly · 09-06-2016, 04:18 AM

Quote:

Originally Posted by Chic

Link doesn't appear to be updated.
Thank you

Fixed. Thanks for letting me know.

codenamepanzer · 09-07-2016, 10:27 AM

It should be appreciated to have the pages displayed in portrait or landscape according each page format. This could be defined when kneeboard creation or dynamically during the flight.
I don't know if DCS enables this.

harf4ng · 09-07-2016, 10:33 AM

Unsure if this has been said before, but is this compatible with VR?
I mean, in VR, are we able to just put the kneeboard where we want to? Like, for instance, on our virtual knee (insane, uh? ^^), so we just have to look down to read the kneeboard?

Thanks

molevitch · 09-11-2016, 12:28 PM

Hi AG, great app, now I am getting into it. Had problems at first but now running as admin, seems to be ok.

I thought I would share what I have done this morning with everybody.

I have always been a bit "meh" about kneeboards, because they were not on my knee.... So I thought, hmm, that old iPad is gathering dust, how do I get my kneeboard on there?

So, I found an app called TwoMonAir, for a few bucks. My old iPad is 1st gen, and only runs iOs 5.1.1. So the only app that would work is the TwoMonAir. (There is a USB version but it kept failing on me. Need a refund...). So this TwoMon app has an option to run the iPad as an extension to a monitor. I am already running a wide monitor, and a touch monitor below for Helios. In my options.lua I extended the width of the main monitor by 700px. Kept main Viewport to the actual monitor size (3440 x 1440).
Then in KB, it reads that the monitor is 4140 wide, and I push the Kneeboard to the top right corner, and Voila!

Kneeboard on my iPad, on my knee....

Brilliant!

Thanks AG!

BaD CrC · 09-12-2016, 01:07 AM

Argh. My bitdefender is blocking the kneeboardbuilder download link telling me it is infected (the page is apparently infected with malware, not your app). Do you have an alternate dl link?
Edit: Never mind, I used my NAS download manager. No pesky bitdefender blocking.

Cibit · 09-12-2016, 12:24 PM

I love this kneeboard builder and the ease of use, but I have a question. There must be lots of kneeboard content that people have created is there a repository for people to upload their creations? and for less creative people like myself to download ?

This seems like a lazy persons post but I think that some people have more of an aptitude for creating stuff than others. Like myself I will add the start up sequence from a manual to the relevant kneeboard but I suspect others would take it furthur and customise them. I may be wrong and rambling but it was just a thought

08-30-2016, 02:15 PM	#531
Chic Member Join Date: Feb 2014 Location: Connecticut, USA Posts: 910	This is a good piece of work. I've not experienced issues some others have had and hope you stay with it. Would donate if that is an option. Sorry if this has been covered but how can we get Gazelle L type as an option? __________________ A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 4.9GHz OC'd, GeForce GTX 1080 Ti 11GB OC'd, 32GB DDR4, 1TB SSD, Windows 10 (64-bit) Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. *JUST CHOPPERS*

09-05-2016, 07:25 PM	#532
AlaskanGrizzly Member Join Date: Dec 2010 Location: United States Posts: 401	Version 1.6.7.9 Released Version 1.6.7.9 is now available. Changelog - Added custom kneeboard support for SA342L

09-05-2016, 08:44 PM	#533
Cibit Veteran Join Date: Jan 2009 Location: Northumberland. UK Posts: 4,244	Thank you __________________ i5 8600k@5.2Ghz, Asus Prime A Z370, 16Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 Adding JTAC Guide //My Vid's//229th AHB

09-07-2016, 10:33 AM	#537
harf4ng Member Join Date: Dec 2015 Location: France Posts: 339	Unsure if this has been said before, but is this compatible with VR? I mean, in VR, are we able to just put the kneeboard where we want to? Like, for instance, on our virtual knee (insane, uh? ^^), so we just have to look down to read the kneeboard? Thanks __________________ Favorite modules : P-51D, F-86F and Huey HTC Vive, GTX 970, i5 6600K, 16 Gb of RAM, Warthog HOTAS, Komodo EC135 Cyclic and Obutto r3volution cockpit with a Gametrix KW-908 Jetseat

09-12-2016, 01:07 AM	#539
BaD CrC ED Translator Join Date: Dec 2008 Location: New Jersey, USA Posts: 2,157	Argh. My bitdefender is blocking the kneeboardbuilder download link telling me it is infected (the page is apparently infected with malware, not your app). Do you have an alternate dl link? Edit: Never mind, I used my NAS download manager. No pesky bitdefender blocking. __________________ Last edited by BaD CrC; 09-12-2016 at 01:13 AM.

09-07-2016, 10:27 AM	#536
codenamepanzer Member Join Date: Apr 2011 Location: Paris (FR) Posts: 118	It should be appreciated to have the pages displayed in portrait or landscape according each page format. This could be defined when kneeboard creation or dynamically during the flight. I don't know if DCS enables this.

09-11-2016, 12:28 PM	#538
molevitch Member Join Date: Jul 2006 Location: London UK Posts: 282	Hi AG, great app, now I am getting into it. Had problems at first but now running as admin, seems to be ok. I thought I would share what I have done this morning with everybody. I have always been a bit "meh" about kneeboards, because they were not on my knee.... So I thought, hmm, that old iPad is gathering dust, how do I get my kneeboard on there? So, I found an app called TwoMonAir, for a few bucks. My old iPad is 1st gen, and only runs iOs 5.1.1. So the only app that would work is the TwoMonAir. (There is a USB version but it kept failing on me. Need a refund...). So this TwoMon app has an option to run the iPad as an extension to a monitor. I am already running a wide monitor, and a touch monitor below for Helios. In my options.lua I extended the width of the main monitor by 700px. Kept main Viewport to the actual monitor size (3440 x 1440). Then in KB, it reads that the monitor is 4140 wide, and I push the Kneeboard to the top right corner, and Voila! Kneeboard on my iPad, on my knee.... Brilliant! Thanks AG!

09-12-2016, 12:24 PM	#540
Cibit Veteran Join Date: Jan 2009 Location: Northumberland. UK Posts: 4,244	I love this kneeboard builder and the ease of use, but I have a question. There must be lots of kneeboard content that people have created is there a repository for people to upload their creations? and for less creative people like myself to download ? This seems like a lazy persons post but I think that some people have more of an aptitude for creating stuff than others. Like myself I will add the start up sequence from a manual to the relevant kneeboard but I suspect others would take it furthur and customise them. I may be wrong and rambling but it was just a thought __________________ i5 8600k@5.2Ghz, Asus Prime A Z370, 16Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 Adding JTAC Guide //My Vid's//229th AHB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode